Jump to content
SAU Community

Rb20 Cam Upgrade

chris1144

By chris1144,
in Engines & Forced Induction

 Share

Recommended Posts

murph Contributor

murph

Posted
Posted

Im running a faily basic RB20 set up

GTR injectors

Splitfires

Vg30 turbo

Nistune

Z32 AFM

Stock manafold

Front mount and exhaust

Was previously running RB20det Red top cams (slightly more duration on intake than the silver top 248 vs 240)

Made 197 KW (16LB) boost

Put a set of Kelford 258s and cam gears

Played around for a bit with differnt cam seetings was chasing response ended up with 12 deg advance on intake and 0 exh.

Made 207 KW (16LB) boost

No loss in power over the entire rev range and held the power in the top end without falling off like it did before, also power and boost came on a bees dick earlier.

But yeah I see no point in putting a 6 boost on with a 2860, a waste of time really Probably get better response with a stock manafold,

murph Contributor

murph

Posted
Posted

After doing my cams Id recomend it, I had my limiter set a 8200, old set up car would never hit it at the track as the power would just die off so hard above about 7300 like falling off a clif.

Now it Hits it easy may bump it up a bit more :whistling: , and has a much larger powere window above 7100, it got good usable powere up untill about 7900 Which is really drifting.

The Dan Grand Master

The Dan

Posted
Posted

After doing my cams Id recomend it, I had my limiter set a 8200, old set up car would never hit it at the track as the power would just die off so hard above about 7300 like falling off a clif.

Now it Hits it easy may bump it up a bit more :whistling: , and has a much larger powere window above 7100, it got good usable powere up untill about 7900 Which is really drifting.

What turbo did you have on that made power all the way to 8000?

What's the point of him upgrading his camshafts so he can rev higher when the turbo won't be making power after about 7k?

murph Contributor

murph

Posted
Posted (edited)

Nah I didnt a play with cam timinig with the factory cams, was thinking about doing it but never go around to it, then I found a set of cams for a price that i couldnt turn down, so I did it all at once.

My car before cams it made peak power at a little over 6 ish , but power started to drop off a bit after 7k and was toatlly gone by 7.5.

Am only using a factory VG30 turbo

Peak power is still at about the same spot but it the engine does not loose efficency as rapidly once over reved, at about 8100 the power is the same as with out the cams, but between 7 and 8k there is about 20 kw diffrence. Which I find very usefull at the track i just gives the engine a more useable power band.

Money would be better off spent on a turbo, But I dont want want to have my car make more than 220 Kw as I could not afford to run a car with more power due to the aditional cost in tires

Edited by murph

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Murray_Calavera
      Question about BoV on RB25DET NEO

      By Murray_Calavera · Posted

      You've just discovered a really good reason to tell yourself, yes, I do need to buy an aftermarket ECU. Put the MAF in the bin. Slap in the new ECU and have a think about what turbo sounds you prefer.  Do you want a 90's style BOV wooosh? Do you want a hektik tsututututu?  Mate, can't go wrong. Just gotta get that ECU and the world is your oyster. 
    • Kapr
      Question about BoV on RB25DET NEO

      By Kapr · Posted

      Hi. Iam just curisou about this topic. I saw this video. It is about Greddy Type FV2. I know that BoVs are about that sound but how and when to use it? I read some topic here and from what i have understand on stock RB with MAF there will be some "problems" if you use this BoV? It vents the air in to the atmosphere and the MAF on stock car needs this air back in to the intake and not out? Or is it wrong? If so...i saw you can put some adaptor to circule air back...but does that not "loose" that sound? I saw another BoV from Turbosmart and it has two "exhaust" like ports? One is for the stock tubing for letting air back and one is for "sound" and let the air in the atmosphere? Can someone please explain? This is the Greddy one:  And this is the Turbosmart.     THANK YOU!! EDIT: So i read about this topic some more and i if i understand that correctly: That Greddy can function either like BoV or 100% Bypass valve? And that Turbosmart is what they called hybrid so you can adjust what and how many air can be vented out or back in? Is this right? THX!
    • Dose Pipe Sutututu
      Low oil pressure after WOT

      By Dose Pipe Sutututu · Posted

      That dirty voltage drop is the culprit I suspect 
    • pogman
      Low oil pressure after WOT

      By pogman · Posted

      i cant get them all in 1 screenshot unfortunately as i just dont know how to move things around tbh, but they are all from the same log and the line crosses at the same point for all of them
    • MBS206
      The Ls1 R33 Of Fury

      By MBS206 · Posted

      It's about time I start work on my sun tan. So I knocked up a few parts that will all combine together to become my new power steering reservoir. Now just to produce an abundance of UV and IR rays while melting a heap of bits of alu to become one... Well, that's after I put one more hole in it for the return line to plumb to. It likely won't be this weekend, as Sunday I'm meant to be in doing some last minute stuff to the AMG race car, and the weekend after will be filled with non my Skyline stuff, followed by Bathurst 6 hour. So I don't expect to get to melt metal for at least 3 weeks.   I also managed to stuff up and start cutting the hole for the res to pump pipe on the wrong side of the line... It means instead of the lines being nice and tight against the inner guard, they'll be out off the guard.    The size of it means I should end up with about 1.8L of power steering fluid, and still have space for another half a litre before it reaches the overflow/breather. This is wayyyyyyy more capacity than factory, which should help keep Powersteer oil temps lower, and the design hopefully allows it to prevent any aerated oil being able to makes its way down to the bottom as it'll have a couple of baffles and some hopeful trickery to force air bubbles away from the bottom.
×
×
  • Create New...