Jump to content
SAU Community

Recommended Posts

SAFC did wonders for me. Went from ~140rwkw @ 7psi to ~200rwkw on 8.5psi. For basic "stage-one" mods such as yours they're good to gain that little bit extra. I'm now going Nistune as the car is past what an SAFC can handle.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6496398
Share on other sites

I've got an SAFC II lying around that I used to have on my car. The unit is in PERFECT condition but I stripped back the wires to bare to which is how I spliced in into the stock R33 loom. You can have it for $180 + postage from Brisbane, I've even got the stand.

It was very handy when I had 10psi and R34 SMIC, 3" exhaust to prevent rich and retard section of the maps. But don't expect to be able to run 15psi and make 220rwkw. Nistune is a good option if you have a bit more $$$.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6496558
Share on other sites

IMHO, small mods like upping the boost, exhaust & fmic ra ra.. good investment to tidy up the air fuel ratios.

Even change from the stock airbox to a pod filter will affect air fuel ratios a bit, I find that running a pod in stock form makes the car run a tad richer (I've seen it with my own eyes on my old car, using an Innovate wideband O2).

If you're planning just to do simple mods, I see why not.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6501381
Share on other sites

Yeah that's it, just invest in a wideband o2 and use it to tidy up your A/F ratios.

If you ever need a hand, I can provide that service for a slab of beer, and if you want to get it dynoed with me tidying it up, there are few places that hire out dynos for $100 per hour.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6501463
Share on other sites

SAFC is basicaly a piggy back that allows u to change ur air fuel mix eg run more boost and not lean it out amongst other things. Best investment I have made is the PFC. Get a good tunable ecu. I gained 30rwkw from a boost increase to 10psi and a tune on a pretty stock setup, just exhaust FMIC and ecu. Then later when u want more u just add ur mods and retune. Find a good tuner your happy with. See what the tuner does best for your car and do your ur research. Purchase. Tune. Happy Days. If your going to mod later why buy a SAFC to tune then an ecu to tune. Its just an extra expense that you will sell off.

Edited by FordyR31
Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6502282
Share on other sites

not sure im convinced with "waste of money" or "does nothing"

it has limitations and isnt the be all and end all but if you can get one cheap and can get some cheap tuning time you can net yourself some good gains basically everywhere in the RPM range

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6508996
Share on other sites

if anybody else has one coming up for sale can you please let me know? interested as i have similar mods makin around 190rwkw and am not looking for massive gains just a bit of options when it came to tuning. not looking for pfc or nisstu thanks!

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6509374
Share on other sites

if anybody else has one coming up for sale can you please let me know? interested as i have similar mods makin around 190rwkw and am not looking for massive gains just a bit of options when it came to tuning. not looking for pfc or nisstu thanks!

Here's one:

http://www.trademe.c...n-507453930.htm

and a bunch more from $90 to $500

http://www.ebay.com.au/sch/i.html?_trksid=p3907.m570.l1313&_nkw=SAFC&_sacat=0

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6509471
Share on other sites

SAFC's are fine for mild mods, they aren't as shit as people think. If you're on a budget they go ok.

Exactly true, great for tidying up a/f ratios. Back in the days when I was a broke uni student, the best I could afford was a SAFC. I borrowed a wideband O2, and cleaned up my a/f ratio.

Don't worry about those keyboard warriors, for simple mods on your car, a SAFC is great.

Link to comment
https://www.sau.com.au/forums/topic/407413-safc/#findComment-6509807
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Come to Eastwood, you'll get plenty of that 🤣
    • Oof, I will forevermore have those shredded gears in mind whenever someone talks about showing mechanical sympathy towards their car. Thanks for the photos, fascinating stuff!
    • Curious to see how the SpeedTek stuff holds up
    • The holdups last year were drivetrain related. I had the car out right after getting the bearing issue resolved. Third launch and the car didn't move after releasing the clutch. It had sheared all the engagement teeth off the 1st gear.    Thankfully no other damage was done. I set an aftermarket gear beside an OEM gear and found that the engagement teeth on the OEM gear were much larger and better supported. Looking through my bin of spare transmission gears I found that there are two types of tooth on the OEM first gears - the larger tooth and the smaller tooth. It looks like most aftermarket gearset manufacturers base their design on the smaller tooth. OEM large tooth left - Speedtek, OS Giken, etc or OEM small tooth right Decided to give that larger engagement tooth a try. Pressed the ring off an OEM gear and sent it to a transmission manufacturer here in the States. They did their "faceplating" operation with my synchro ring on the Speedtek gear.   I reassembled it, took it back to the track and promptly destroyed the gear itself.  I'll rebuild this and use it as a spare - thankfully just first gear and the countershaft are damaged beyond repair. Definitely disheartening but my welded on engagement tooth ring held up!  Moved to Speedtek's dog engagement design as the gears appear to be much stronger. So far they have taken much more abuse at the track. Also scored a Stillway lockout from the Netherands for super cheap. It's for some other RB transmission so it took a bit of fabrication to fit but honestly a very easy job. I also had to heavily modify the gates as they were very different.   Then for some reason at the last test and tune a silicon coupler below the throttle blew off and took out the radiator and fan. Thankfully it was in the burnout box and not down track. This car is really beating me up - I still haven't made a pass in it. Ran it through the gears many times on the street but it keeps biting me at the track.  Currently in the process of replacing the radiator and remaking the throttle pipe to remove the coupler and use a cast 90 and a vband. I WILL get this thing down the track...
    • Covers most of the above points really. There's a few exceptions but most just see driving as an irritating but necessary task they must complete if they want to get anywhere on time. Also see it as a good time to show their awesome multi-tasking abilities on their mobile and/or doing their makeup.  
×
×
  • Create New...