Jump to content
SAU Community

Recommended Posts

Had an old thread about this somewhere, can't find it now so figured I'd start again.

Bought the car in 2005 looking like this post-67928-0-20658200-1345549055_thumb.jpg

Came with the following:

RB25DET S2

RB20 box

R33 rear brake swap

4-5 stud front converters

recaro knock off seats

SMIC of some sort

Unknown 2 way

TEIN HR coils

cusco castor rods

stereo didn't work

Unknown heavy as hell twin plate

A/C didn't work

3" exhaust with a cannon

Shortly after getting it put a FMIC in it, did skids around parts of Canberra.

post-67928-0-27727800-1345549329_thumb.jpg

Took the Apexi badge off, ruined the grille and was gay.

Moved to Melb in 2006 with work, did a track at Winton, got the front end airborn over a ripple strip whilst spinning coming onto the main straight, landed hard & did some minor damage.

post-67928-0-94588000-1345549493_thumb.jpg

Went on my farewell cruise in October as I'd finished my work there. We camped out all night, bonfire, drinking, etc - Melb west meets kids should know, ran out of talent in a big way. Stoved into an embankment with a drop off just in front of it nose first, pushed the rad support up, bent the cooler, bent the chassis rails etc. Despite overheating in traffic & handling like shit, it got home the next day :)

post-67928-0-44945200-1345549678_thumb.jpg post-67928-0-23459500-1345550197_thumb.jpg

Moved back to Canberra, got the body work fixed up whilst I was without a license. Car looked presentable, hadn't got the rails straightened yet, still handled like shit. Used it as a daily for a while, hit a roo that bounced off a car coming the other way, f**ked the front bar, reo & cooler again. CBF paying rego on it as the car was getting more damage on the road than on the track so decided to go track only. Chucked it on a jig & pulled it straight(ish), car then sat for about 3 years slowly accumulating parts. I barely ever turned the engine over, never drove it, just generally hated it.

Finally got organised & took it to a Wakefield track day earlier this year, killed the stock RB25 AFM.

post-67928-0-99499600-1345551817_thumb.jpg

Since it came off the road:

gutted interior

shadow gauges

front & rear strut braces

silk road coilovers

cusco camber arms

boxed K-frame brackets

Velo seat

Velo harness

Z32 ECU + Nistune chip

Z32 AFM

currently sitting on R33 GTR rims

JJR 5 stud hubs for the front

Have a DMAX roof wing to go on, a cut & shut GTR plenum to go on but the f**king thing fouls on the brake master cylinder. Just sold the Blitz rims to the missus so she can stick them on her sil80 as daily drivers and keep her Buddy Clubs as track rims.

Buying a set of Zenkais (yeah yeah hate hate) because they're cheap and decent offsets. Plan to get a set of silver Weds SA-90 in 17x9 +20 as well, they look decent without the gay blue sticker around the inner lip on them. Will also evetually get the GTR plenum & new cooler piping sorted.

/cool story bro story

Link to comment
https://www.sau.com.au/forums/topic/407529-my-crapbox-ceffy/
Share on other sites

  • 2 months later...

Wakefield Matsuri was on this weekend. Got the car all sorted, took it out yesterday and the clutch started slipping in the afternoon. Let it cool down, took it out again later on & it was good for most of the arvo.

Think I blew a turbo seal early in the arvo today too. Took off from the line, really slow through the revs in 2nd & 3rd & noticed white smoke coming out the exhaust under accel a bit later on when test driving the car once I was home.

New clutch & turbo it is then :)

Edited by a31rb25

Couple of pics from last weekend. The old girl also received a few more parts before getting thrashed again:

GKtech Caster arms

GKtech offset caster spacers

GKtech rack spacer

Tein strengthened tie rods

Tein OEM style rod ends

S14 LCAs

932_508751002478004_1267342242_n.jpg

230187_367357063354422_826854051_n.jpg

14256_366165100140285_668958678_n.jpg

Was running Achilles ATR Sport front & rears all weekend. Didn't really like them as fronts, understeered a little too much but I didn't play with the pressures at all to see if that improved them. Will be going for something a little better on the front next time I think.

Edited by a31rb25
  • 4 months later...

Long time no love for the ceffy. I've relocated to Adelaide, it's nice to back home and have regular track days.

Have relpaced the clutch, found out the one the car came with is an OS Giken super single. I'm going to get it rebuilt and stick it back in the car as it was all kinds of win. Have also replaced the blown turbo with another stock 25 one, fitted a Velo harness and replaced the slipping OS Giken with an Exedy organic sports clutch, which will become the spare.

Track day this Sunday, will be good to skid again after months off, again.

Edited by a31rb25
  • 1 month later...

Munted the front bar at the track day, clipped a marker breaking one of the cable ties, then drove the rest of the lap with it scraping under the front end so have worn a big hole in it :) Also dropped a bolt for the universal bearing carrier bracket thing which caused the driveshaft to smash about making an almighty f**king racket off the line as shit was flopping about everywhere on take off. By the time I got sick of the noise & sorted it out the day was over.

New clutch performed well though, now thinking of painting the car custard yellow with a grey kit and chucking some taxi lights on top to take the piss out of the ceffy myth.

Also won these on yahoo.jp the other night. 17x8 +25 so they'll be going on the front in a couple of months when they arrive.

post-67928-0-14697300-1368700169_thumb.jpg

Edited by a31rb25
  • 8 months later...

Not much has happened since the previous post other than doing a few track days. The most recent one, Mallala matsuri on Jan 25 was terrible. Blew the headgasket so that's gotta be fixed and a few parts replaced like thermostat, water pump, + new head stud bolts, new radiator hoses and a few other little things.

1078561_808483682501468_697677367_o.jpg

Since going to Mallala and seeing 2 cars flip and how many tyre stacks there are everywhere this has been happening whilst the car is off the track. CAMS spec weld in half cage with single side intrusions. With the headgasket going, a newborn kid and holding money aside for when Iron Chef finds me a JZS171 Crown Estate, I can't afford a full cage :(

1795586_10152257014849747_516610421_n.jp1653789_10152257014739747_1601722624_n.j1779101_10152254642679747_915638489_n.jp

  • 3 weeks later...

Getting a new engine, ring lands were knackered on a few cylinders. No big build or anything like that planned, no conversion, just buying a stripped down 25, chucking all my shit on it and putting it back in. Now have a heap of new parts that I won't be using so will slowly rebuild the knackered engine, get the head reconditioned, etc.

Also about to bring in a JZS171 Crown Estate.

  • 4 months later...

New engine in, just another stock 25. Did another track day at Tailem Bend clutch started smelling straight away. Let a mate drive it, he stripped 2nd gear and then after lunch I was attempting a lap using 1st & 3rd when the clutch completely shit itself.

Time to get my old OS Giken super single rebuilt and get a 25 box with the tax return.

  • 3 weeks later...
  • 1 month later...

Gearbox, Nismo solid shifter & overhauled clutch are in. Chucked in a Navara speedo sensor as well. Was having issues with bind, so asked Simon Michelmore to chuck some lock stops on my extended LCAs, he modded my knuckles for SFA instead. Waiting on longer tie rods & ends to arrive.

In the meantime I got bored so painted the corner lights.

post-67928-0-40859700-1413594712_thumb.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yuck. But it's kinda the same principle, moving timing around to make car run bad but sound good.... I went for a more spirited tuning drive to iron out a few things. Car no longer stalls, and it loved to dip RPM low when you clutch in. After tuning this (and the 4-5 tables that HPTuners/LS1 OEM ECU wants for idle air correction) it's now behaving somewhat normal. All expected because there's a new TB, new Intake manifold and that new TB which is 102mm vs 78... has an entirely different IAC passage which is smaller because ????? Unfortunately at this point I went to make further fine tuning changes to avoid it flaring up, you know... _tuning_ the HPTuners dongle died. Well to be more accurate - The USB cable died in a fashion that anyone who has ever charged a phone will recognize. After the app demanding I resync it 50 or so times (which all 'succeeded' but all failed) the device does not want to sync and I've logged a ticket with support to see if it's fixable. US Support said it was a 'storage issue' but after removing the SD card inside it and formatting it/fixing it the issue does persist. Unfortunately usually the fix is "Turn in your old dongle and pay $700 for the upgraded one" it's cheaper because I get some free licence credits I unfortunately don't need. However I'm 10 minutes down the road from HP Tuners AUS/VCM so at least I won't need to post it, and logged a new ticket for support over here. Definitely drives different. My SOTP dyno believes it's probably making 310-320kw instead of the 280 before.  It scrambles for traction a little now whereas it previously different. It drives like a bigger cam car up top even though the cam is smaller, likely due to the cam not being advanced 6 degrees. The timing is deliberately low and the fuel is very rich so who knows if this will improve on the dyno. It may, imperceptably. Also funny is removing the pineapples definitely makes the car squat more and axle tramp less. So this behavior of having more top end, squatting more, and scrabbling for traction more makes me think = more power. But I could have just been sitting on the threshold of that kind of behavior before. Time will tell if my butt dyno is calibrated right. I need the exhaust leaks fixed before dyno tune for obvious AFR related reasons - I repositioned the pipes but I'm not confident it's fully sealed even if it is better. At least the car does drive around while I cannot tweak/tune it for now. And I have aircon again. medium success!
    • Don't use that manifold. Please don't use that manifold. Sunk cost fallacy is not worth the later pain. None of these will be relevant to the change that will come from the different turbo and manifold. As in, the effect of the exhaust will be nil, regardless of what else is changed. And all the cam and fuel system stuff is not changing either way, so has no effect. The turbo and manifold (and to a small extent the wastegate)....big change.
    • Just wanted to say thank you for your input   my man (lead mechanic by trade) and I have done a heap of work as you can imagine just to make the hot side work with the dump pipe, stupid massive intake on turbo, trying to get the waste gate on was not fun.  I’m kinda getting to the point where I don’t know if I try and make this work and not throw all this cash and time away or do I scrap the lot and start again? the Apexi I’ve got was tuned for a few slight differences:   Tomei pon cams (mine are stock neo) Turbo smart 38mm external waste gate (mines 45mm replumbed) with stainless screamer pipe  3inch turbo back exhaust with high flow cat Sard 800cc top feed injectors Sard adjustable fuel pressure reg    
    • Out here E90s are the cheapest way into a sporty-ish car because everyone knows just how expensive the repairs can get. 8-10k USD for an automatic 335i. 
×
×
  • Create New...