Jump to content
SAU Community

Recommended Posts

Hey guys, got some left over bits after upgrading. Vehicle has done 94,000kms so everything is in excellent condition unless otherwise noted.

I''m negotiable on some things if you think they're too dear!

All parts can be either picked up from Melbourne western suburbs after hours or from Hawthorn during business hours.

I''m happy to box things up to post interstate but postage is at your cost.

Cheers.

Original GT-R Coilovers. Very good condition, no signs of oil leaks at all. $200.

Original GT-R 444cc Injectors with Resistor and plugs. Upgraded to 1000cc's so not needed. Worked perfect. $350.

K&N M''s Intake Piping. Probably need new filters. Comes with Jecs air flow sensors and plugs. $200.

Original GT-R Steering Wheel. Exceleent condition for age, tiny bit of roughening on top. $200.

Original GT-R Fuel Pump. Worked perfectly. $75.

Orignal GT-R Cam Gears. No signs of wear. $25.

GReddy Boost Guage. Pretty good condition. Illuminates green. $50.

HKS EVC Boost Controller. Worked fine. Bit tacky looking on top from being taped to dash. $100.

Z32 Air Flow Sensor Plug. New plug, original wiring. $15.

Ski chains for 14-18"" Wheels. See picture for exact sizes they fit. Why hire?? $75.

FREE!!! Orignal Radiator. No leaks but probably needs a flush. $$Postage Only.

Please let me know if you need any pictures or further info.

Thanks for looking!

post-92503-0-31121500-1345599030_thumb.jpg

post-92503-0-10579300-1345599037_thumb.jpg

post-92503-0-26006200-1345599047_thumb.jpg

post-92503-0-76408000-1345599059_thumb.jpg

post-92503-0-46785400-1345599068_thumb.jpg

post-92503-0-48675900-1345599075_thumb.jpg

post-92503-0-90485900-1345599083_thumb.jpg

post-92503-0-30847600-1345599091_thumb.jpg

post-92503-0-66662800-1345599130_thumb.jpg

post-92503-0-05133100-1345599142_thumb.jpg

post-92503-0-27703900-1345599149_thumb.jpg

post-92503-0-56303600-1345599208_thumb.jpg

post-92503-0-76620600-1345599215_thumb.jpg

post-92503-0-06960100-1345599226_thumb.jpg

post-92503-0-52726400-1345599237_thumb.jpg

post-92503-0-34888400-1345599245_thumb.jpg

post-92503-0-19140900-1345599278_thumb.jpg

post-92503-0-52601700-1345599288_thumb.jpg

post-92503-0-30493200-1345599298_thumb.jpg

post-92503-0-28900000-1345599307_thumb.jpg

post-92503-0-96387500-1345599316_thumb.jpg

post-92503-0-01852800-1345599326_thumb.jpg

post-92503-0-60188900-1345599335_thumb.jpg

post-92503-0-75463800-1345599344_thumb.jpg

Injectors (and resistor), Boost Controller and Boost Guage sold pending payment......

Injectors (and resistor), Boost Controller and Boost Guage sold and picked up.

Negotiable on everything. Especially the big $hit that's taking up room in my garage!

Price updates.

Original GT-R Coilovers. Very good condition, no signs of oil leaks at all. $150.

K&N M''s Intake Piping. Probably need new filters. Comes with 2X genuine Jecs air flow sensors and plugs. $100.

Original GT-R Steering Wheel. Exceleent condition for age, tiny bit of roughening on top. $150.

Original GT-R Fuel Pump. Worked perfectly. $50.

Orignal GT-R Cam Gears. No signs of wear. $15.

Z32 Air Flow Sensor Plug. New plug, original wiring. $10.

Ski chains for 14-18"" Wheels. See picture for exact sizes they fit. Why hire?? $50.

FREE!!! Orignal Radiator. No leaks but probably needs a flush. $$Postage Only.

Coilovers sold pending payment/pickup Monday.

Open to offers on everything else!!!

Good work Brad! Thanks for that.

Hopefully Jacob who bought the EVC see this as I''m sure it''ll come in handy.

Thanks again Brad. Remember to bust my balls if you have ID1000 issues!

  • 2 weeks later...

Couple of things left if anyone is interested-

K&N M's Intake Piping. Probably need new filters. Comes with 2X genuine Jecs air flow sensors and plugs. $75.

Original GT-R Steering Wheel. Exceleent condition for age, tiny bit of roughening on top. $125.

Original GT-R Fuel Pump. Worked perfectly. $50.

Orignal GT-R Cam Gears. No signs of wear. $10.

Z32 Air Flow Sensor Plug. New plug, original wiring. $10.

Ski chains for 14-18" Wheels. See picture for exact sizes they fit. Why hire?? $50.

FREE!!! Orignal Radiator. No leaks but probably needs a flush. $$Postage Only.

A few extra bit in addition to above-

Genuine mats, pretty good condition, would come up good with a clean $50

DSC07395.jpg?t=1347192787DSC07396.jpg?t=1347192792

Brand new 80mm throttle body with weld on adapter (was purchased for SR20 but will work on other cars $150.

DSC07389.jpg?t=1347193391

DSC07390.jpg?t=1347193350

DSC07391.jpg?t=1347193165

Brand new 3" Weld in high flow cat 100 cell. $175.

DSC07392.jpg?t=1347193137

DSC07393.jpg?t=1347192969

  • 4 weeks later...
  • 1 month later...

Last bump before remaining stuff goes into storage (the bin!)

This is what's left-

K&N M's Intake Piping. Probably need new filters. Comes with 2X genuine Jecs air flow sensors and plugs. $25.

post-92503-0-19140900-1345599278_thumb.jpg

Ski chains for 14-18" Wheels. See picture for exact sizes they fit. Why hire?? $25.

post-92503-0-06960100-1345599226_thumb.jpg

Genuine mats, pretty good condition, would come up good with a clean $25

DSC07395.jpg?t=1347192787

FREE!!! Orignal Radiator. No leaks but probably needs a flush. $$Postage Only

Brand new 80mm throttle body with weld on adapter (was purchased for SR20 but will work on other cars $125.

DSC07389.jpg?t=1347193391

Brand new 3" Weld in high flow cat 100 cell. $125

DSC07392.jpg?t=1347193137

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pfft. As if I'd ever point a high pressure washer at my car.
    • The nature of my commute has changed. Way back then it was traffic lights all the way, for ~28km. It sucked. When they finally stitched the expressway together I could do a good 15+km of it at a steady 80-100 with no stopping. That alone has gotten me down to flat 10s. Prior to that it was mid-high 10s. I can't remember the delta that I saw when I got the idle down. It was only ~150 rpm, because the idle speed was never terrible, but for the delta in consumption to be noticeable it would have had to have been at least 0.2-0.3 L/100km - which is not to be sneezed at when it comes for absolute free. It's only about 50L per year, but that's ~$100. A few extra pizzas is always welcome. Note that I have a record of every tank of fuel that has ever gone through my car except for a handful put in by someone else, like my mechanic. I can show you the difference between stock RB20 and tuned RB20, stock RB5Neo and tuned, winter and summer fuel blends, winter and summer fuel blends when the ambient temperature is not appropriate for the blend, working O2 sensor, blown O2 sensor, boosting f**k out of it and frightened to boost it because it is pinging, and so on. OK, I probably can't do all that now with 100% clarity - but at the time when any of those things were in event, you could see it in the records. There's 25+ years of simple tank after tank records, so you have to look for landmarks to work out approximately how old any single record is. What's really important is the meta data and that lives in my head.
    • If you're claiming the issues are not skyline specific, then either the USA is living in the 90s / early 2000s, OR you have the issue of "survivor bias". Which is you're mainly hearing and listening to those with terrible experiences, and haven't found the guys who have cars with good decent builds and no problems. It happens in AU too, that plenty of people keep having issues, and they keep going to the workshops that are known to be shit "because I read on the internet". Even worse, are those who keep posting on the internet as though they know for a fact what something is, when they've never touched/looked at said item in their life, and again are making assumptions, based on something they read, or because it's a certain way in other cars. It's even funnier when those same people debate the facts with the people who've lived and breathed this stuff for over 15 years. Example, I've had someone tell me you can't do something with a Skyline, because they read it on the internet, except I can tell they're wrong, as I did that exact thing back in 2008 with my Skyline.
    • The funniest part I saw, was someone would bitch and moan on FB about something, Andy would be the one to respond, asking for more info, if he could contact them, what the engine setup is, what their config file was, and 95% of the responses were people just going "der! It doesn't work" and Andy going "What doesn't work?" And then going "The firmware!" And they'd go around in circles as no one could ever give information, and Haltech couldn't fault things on the bench, (especially when people wouldn't give any specifics).   Many moons ago, when Andy was back at e420c stage, he reached out to me, and asked me to test different plug and play looms for him (already had an e420c in the car on his V1 PNP loom). And he kept asking me, as I was competent enough to be able to give him some specific feedback on what was/wasn't working, how to replicate the faults etc, and work through things with him. Most people are terrible at answering the questions they're asked, or being able to provide quality feedback other than "it doesn't work".
    • I say it often, none of this stuff is really Skyline-specific per se. But in general there's not a lot of people who actually know what they're doing. A lot of people charging like they do. Agile software development probably isn't the greatest idea for an engine controller.
×
×
  • Create New...