Jump to content
SAU Community

Recommended Posts

I am looking at becoming a Stagea owner and need to off load my R34 to finance it.

1998 R34 GTT, with 105,000kms.

Manual.

NEO engine.

100k service done.

Hypergear G2 FNT Turbo.

NIStune ECU with duel fuel maps.

Run NIStune from the "stereo" CarPC and change fuel maps at the servo.

Wideband O2 guage for self tuning ability.

270rwkw on PULP98, tuned by Autotech.

290rwkw on Ethanol (E-Flex), tuned by Autotech

All power upgrade supporting mods done: (All made to look very factory)

550cc injectors.

Blitz Turn Flow FMIC.

Genuine Walbro 255lph fuel pump, with full voltage mod done.

XForce 3" full exhaust with Loboka 100CPI Cat.

Varex 3" Muffler with custom valve button on the dash.

3" Metal intake with pod, hidden inside modified factory box with snorkel.

R34 GTR wheels.

Slotted rotors with redstuff pads and braided lines.

adjustable coil overs. Also have the original shocks and exhaust to chuck in with the sale.

Downsides:

It hasn't had any under cariage mods done. Still needs Hicas lock bar, and bushes done.

I'm looking for $18,000

post-62296-0-38690200-1345721672_thumb.jpg

post-62296-0-10441500-1345721284_thumb.jpg

post-62296-0-37755700-1345721317_thumb.jpg

post-62296-0-44693400-1345721352_thumb.jpg

post-62296-0-04567800-1345721381_thumb.jpg

post-62296-0-46823500-1345721411_thumb.jpg

post-62296-0-81343400-1345721505_thumb.jpg

post-62296-0-58875200-1345721524_thumb.jpg

post-62296-0-68553900-1345721705_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/407673-r34-gtt-modified-act/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...