Jump to content
SAU Community

Recommended Posts

Hi Guys!!

Im relatively very very new to the scene in Sydney and in Australia in general. Ive got a R33 GTST which i intend to work on and use for 1/4mile drags and possibly drifting later on.

At the moment it is stock standard (i know very rare to find one) and i intend to do mods starting from the basics like exhausts and to more intense stuff like front mounts bigger turbos and etccc.

My question is how can i build a car and use it on the tracks? i understand we wont be able to get any form of certification to drive it to the race track???

What all do i need to do here to get into the scene? do i have to be a member somewhere, pay extra rego?, always tow the car on a trailer?? how about drive days? how do i use the car if i wish to drive it on cruises?

Greatly appreciate if someone can get me started here.

Cheers,

Shaq

post-97349-0-17161900-1345769743_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/407697-requirement-for-track-races/
Share on other sites

Hi Shakil,

You are best to start by joining a club like SAU NSW, there are details in this thread: http://www.skylinesaustralia.com/forums/topic/365434-s-a-u-n-s-w-club-membership-faq/

From there, you have a range of options depending on budget, time and enthusiasm

Entry level / club events: You would need either nothing, or just very basic safety gear like a fire extinguisher. In addition to the entry fee, some events require one of various licenses which you just pay for. This could include drag days, skidpans, drift days, supersprints like world time attack, motorkhanas etc etc. Most are very friendly events with a little competition between entrants, but nothing too serious.

State or National Supersprints or Hillclimbs, or a quick drag car: When you step up a little it is more serious. You may require more safety modifications (eg faster drag cars need roll cage and a blanket around the gearbox), or if you are looking at other events you may want to fit a roll cage. The rules tend to be stricter and more seriously enforced. Once you have a roll cage it is harder to keep the car road registered but many people do

Full door to door racing, tarmac rallies, dirt rallies: If you decide to go here you almost certainly need a dedicated race car, and budget starting at say $20k per annum for a couple of rounds in a NSW series.

Thanks guysfor responding especially Duncan for pointing out benefits of membership to SAU which im definitely considering.

As for races i wana start with 1/4mile drags and later into drifts.

So my car will require mods and these days it appears RTA or the cops arent too happy with modified cars on the road.

I want to modify it and use it as well. Especially be able to drive it to car shows n drags without getting booked

Mate you will be fine, you need to follow the RTA guidelines the best you can when modifying your car BUT you have a great car to modify and enjoy... My car is making awesome power and is legal Db, has all of the boxes ticked in terms of legality... I still need an engineers certificate though which you may need eventually....

If you want to drag race go to the WSID Wednesday off street drags, any car can enter and no race license needed :)

Next door you have Eastern Creek or Sydney Motorsport Park and there is plenty of drift etc happening there....

Join SAU NSW, best club ;)

Also, wanna thrash your car off street, you have events like powerplay on November 3 etc

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @soviet_merlin Thanks mate!  Nothing too major but will hold me up for a while. I've got lymphomas to get taken off the back of my neck and the middle of my spine which always conjures scary thoughts!  It sounds worse than it is. Yeah great, conjuring more rabbit hole deepening , just what I need! 🤣  
    • I'd argue the F50 kit I got is very good value. For ~2k I got the calipers (refurbed condition), adapters, pads, brake lines, rotors, and top hats. I think you'd be pretty hard to get Evo/GTR/350z brembos + the additional hardware for similar money. Used market for a pair of front calipers alone I've seen tend to run anywhere from $1500-2000 depending on condition.    That said, something like a GTR or 350z brembo is a lot easier to adapt to the Silvia. 
    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
×
×
  • Create New...