Jump to content
SAU Community

Recommended Posts

  • Replies 121
  • Created
  • Last Reply

Top Posters In This Topic

Get some better tyres. Or go and do a defensive driving course, as you will hurt yourself or worse others. You need to learn to drive that thing.

Do a defensive driving course and learn how to control your car ASAP

This

Its funny how everyone is saying how tail happy the Skylines are in the wet, mine was faster and handled better in the wet than it ever did in the dry haha

Haha, drifting around corners is faster

Is it only like this in the wet? Is there a chance that your tyres are on the wrong sides, i.e going against the Correct rotation? Therefore causing water not to dispurse away from the tyres

Taking the swaybars off will actually let the car float around a little more.

I know a few GT-R owners who will drop/loosen the front swaybar if it's really wet at a track day to get more weight moving :thumbsup:

Ahhh I see. I stand corrected.

Is it only like this in the wet? Is there a chance that your tyres are on the wrong sides, i.e going against the Correct rotation? Therefore causing water not to dispurse away from the tyres

That's a really good point.

I remember I borrowed a honda CRV with flogged out suspension all round. If I went around a roundabout any faster than Nanna would, it would understeer into the next lane. So rubbish. I'd be inclined to re-check your suspension geometry, swap out your tyres, and go learn more about driving in the wet. Don't turn under brakes!

if your coilovers are adjustable put it on a looser setting

it's most likely tyre quality/wear causing you to spin out at low speed in the wet

take close up a picture of your tyres on the sidewall & the treads & post it here

I don't understand how a 180 degree spin is possible at such low speeds around a round about. Was it the same round about that you spun out on the second time? Maybe there's a bump in the road that you're not seeing in the wet?

New tires is just a bandage fix imo. I have shitty ones and they grip fine in the, never had it come out unexpectedly, definetly nowhere near a 180. How's it grip in the dry? Could be the Tyres facing the wrong way as mentioned before

It sounds like there's basically no weight transfer at all in your set up.

If your springs & shocks are too stiff; you'll get no warning when it's about to break away.

No body roll is not necessarily a recipe for good handling; there has to be some compliance; otherwise the car won't absorb any bumps, it just bounces over them.

No wheel on the ground; no traction from that wheel. Doesn't matter how wide your tyres are then.

Do the coilovers have adjustable damping? What are the spring rates?

yes they have 30 levels. I figured that its daily driver so i out it on the softest setting on all four corners. could this have something to do with it?

My money is on shit tyres. What are they?

Pedders coilovers arent harder than some jap spec ones. So Im declined to blame that.

My mates 32 had a problem with spinning around spontaneously, but his hicas light was intermittently on. So we blamed that.

But for you, Get some better tyres. Or go and do a defensive driving course, as you will hurt yourself or worse others. You need to learn to drive that thing.

Do you accelerate out of the roundabout when this spin around occurs?

i accelrate , but ever so slightly.

tyres are :

Falken Ziex ZE912

265/35zr18 97w

good tread..

maybe who ever did that threw them over a Nissan Dealer

lol , bakemono racer jab

Do a defensive driving course and learn how to control your car ASAP

yes i will be doing this soon as well

if your coilovers are adjustable put it on a looser setting

it's most likely tyre quality/wear causing you to spin out at low speed in the wet

take close up a picture of your tyres on the sidewall & the treads & post it here

as above , its on its softest setting it its 30range of hardness settings

2012-08-26122020.jpg

2012-08-26122026.jpg

2012-08-26122035.jpg

2012-08-26122008.jpg

2012-08-26121224.jpg

2012-08-26121219.jpg

I don't understand how a 180 degree spin is possible at such low speeds around a round about. Was it the same round about that you spun out on the second time? Maybe there's a bump in the road that you're not seeing in the wet?

no this was a completely different round about

...Was doing about 40km/h.... first thought was I hydroplaned....

You would be surprised how fast you are actually going when you think you are "doing about 40km/h"
I dont feel i have the skills to get myself out of trouble should this happen again with traffic around....

Then get yourself along to a defensive driving course. They should cover wet weather driving, and will even wet the road down for you to show what can happen.
This has only started happening since i got coilovers(which virtually eliminated body roll)...im quite sure that the act that I have a much lower center of gravity has something to do with it but how exactly... whats the physics behind this? I assumed having no body roll was a good thing , but now in the wet I have to take corners slower!

No body roll is bad. The guys at Pedders should know better than to build a setup that doesn't permit lateral weight transfer.

Is the suspension adjustable for ride height? If so, has the car been corner weighted?

What tyre pressures are you running? And a wider tyre doesn't equate to more grip. Maybe the tyres you have aren't really designed for wet road traction.

Have just seen your pics of tyres - nothing wrong with the Falkens. I run them myself, albeit a 235/45x17 on a 32 GTS4 - and I have never had a problem with them in the wet. As I said, maybe they are TOO wide for the rim. And being an 18, there may not be enough compliance in the sidewall to allow good wet grip.

Maybe it was just after a longish dry spell that you struck the roundabout in the wet. Long dry spells cause a buildup of oils and crap that takes quite a bit of rain to disperse. But then you'd expect every second car to be spinning out.

Too stiff

Drive smoothe in bad weather , easy throttle, anticipate braking and idiots cutting you off , and drive to conditions not the speed limit

Tire size is fine same as mine

Oil on roads is likely

Coming into corner to fast and then mid corner snapping throttle closed , unloads the rear end and it snaps it wide on you and your not steering into the skid correctly ends up swapping ends

Bumpy roads ? unload the rear end and your under power flings you sideways , wet road just lubes the spin

Expect all roads to be crap and oily in rain and go to a driving day on a skid pan on car control asap

Edited by Carbon 34

My 2 cents:

  1. Running 265's in the rear and 235's upfront is a significant offset difference for the wheel track. This needs to be compensated for in your driving style. But by the sounds of things you don't have a huge amount of skill.
  2. I think you're running too much negative camber in the rear, the tyres look okay, but I can see more wear on the inside, this means that you do not have the maximum contact patch when cornerning.
  3. When you approach a corner, do you have what is known as "viscious turn in"? I do get a little hardcore on the turn in when I want sideways action, or when I am getting over zealous at the track. Try to be smooth with your steering inputs.
  4. Slow in, fast out. Great words that should be applied to every corner.
  5. Are you taking into account the camber of the road when cornering. Negative effects of camber on corner ability are amplified in the wet.
  6. Wet roads (especially freshly wet roads) are usually very oily as well.

My advice:

  1. Get suspension setup properly
  2. Drop to a 255 rear end, unless you seriously need 265's for traction, don't go any wider than you need to.
  3. Do a defensive driving course, then a track day.
  4. Never ride a motorbike, shit will get ugly in a biblical way

yes they have 30 levels. I figured that its daily driver so i out it on the softest setting on all four corners. could this have something to do with it?

You don't want the softest setting, you want the right setting. If its too soft, it wont control the spring action properly. Try setting it in the middle of the range and drive that way for a couple of weeks, or as long as it takes until you get the feel of it. Then from there try making it harder or softer, but give yourself some time to acclimatise too it. On some shocks with 30 levels it has been found a lot of the settings do nothing... I would try at 15 first, get used to it, then try 10 or 20 or whatever depending on how you think it feels.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yep, that was one of the things we learned fast in the past with our MX5. When you drive with the top down, you are effectively standing out in the sun, 100% of the time, and not getting in any shade (because roads aren't shaded generally!). Just like standing out in the middle of a field on a sunny 27C day is a bit of a bad plan, so is sitting in a MX5 without sun protection.
    • I also just ordered some Frankenstein bolts and side mounts to fit a hard top Just in case I do find one, basically so it doesn't need to be fixed to the car with only the front latch.......and then gaffa tape to keep it in place for the RTN journey from wherever I get it
    • If your temps are fine now, you probably won't have any issues with where your vents are as they don't look right up at the windscreens high pressure area, so any differences when giving it the beans for extended happy laps would be minimal, but, they should vent heaps when stuck in traffic  Much like how that reverse cowl on my SS let "visible" heat out when stationary, but, because it was basically at the windscreen my coolant temps on the Hwy actually raised because air was being fed into it at speed (110kph), to only come back down to around 90° when I got off the Hwy And your 100% correct about the NC currently not needing vents, but, if I was to add a turbo, and a oil cooler and intercooler in front of the condenserand radiator, and then take it to the track???? It is apparently a recommend requirement if I don't want to worry about coolant or oil temp issues, but, any of the above are possible scenarios, over time As it sits now, with the triple pass radiator and stock air conditioning system, I have absolutely no issues with either temps or air conditioning efficiency, I've been basically daily driving thie car for the last month, both on the Hwy, and peak hour, bumper to bumper traffic, but, that's pretty much expected from basically a standard engine  Talking about no issues daily driving, it was 39° the other day and I was sitting in bumper to bumper traffic on the M5 and then M7, with the top down, and with the air conditioning blowing nice cold air on my feet, balls, and face, well, there was one issue, my head and arms got pretty sun burnt Note to self: leave a hat and sunscreen in the car for such days 🤣
    • I would agree, unless you need something specific to the HV motor/battery side repaired or investigated, any mechanic will be able to perform normal services, but if you prefer, maybe look for a mechanic who regularly services/repairs Nissans, the VQ engines are pretty common in the Nissan lineup.  Sorry, I can't make any suggestions, I don't live in Vic.
    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
×
×
  • Create New...