Jump to content
SAU Community

R34 Coil Over

MaccaD2191
 Share

Recommended Posts

MaccaD2191 Enthusiast

MaccaD2191

Posted
Posted

So I'm new here, and I can imagine its been covered before on this forum. But I can't find a straight forward answer.

The rear suspension in my R34 25GT has gone, and I can easily replace it for roughly $600, but I wanted to put adjustable coil overs in eventually any way, so that is what I'll be doing.

I was going to put Pedders Sports Ryder eXtreme XA Coil Over Suspension into it, But the bloke at Pedders seems to think they will fit onto the rears no problems, but might not fit onto the front for some reason.

Also he is doing a really crap job at getting back to me with an answer, which is why I'm asking here.

Now, I can buy a full set of these for $1520, what I want to know is, will these fit onto my car? (year is 1999 in case that makes a difference) Or is there a better product I can put on there in the same price range? (Can't spend anymore than $1600)

I know I can put on normal suspension for cheaper and it might be better quality, but I'll be putting on a body kit and new rims in less then a year (hopefully) and I don't want to have to change the springs again when this happens, which is a good reason why I want them to be adjustable.

Any help would be appreciated, Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/407838-r34-coil-over/
Share on other sites
Miguelone Grand Master

Miguelone

Posted
Posted

Rears come in 2 sorts. Eye or fork lower mounts. Fronts are the same for all R33's & R34's regardless of variant. Tbh I would be going somewhere else and probably getting something a bit better than pedders. Entry level teins, Silk roads etc.

Link to comment
https://www.sau.com.au/forums/topic/407838-r34-coil-over/#findComment-6503885
Share on other sites
MaccaD2191 Enthusiast

MaccaD2191

Posted
  • Author
Posted

Apparently I must have eye lower mounts, I'm not using my car for any sort of drift/racing so they don't have to be the best,

How much would it cost for tiens or silk roads? And are they adjustable coil overs?

I don't know much about cars in general so sorry if I sound like an idiot haha

Link to comment
https://www.sau.com.au/forums/topic/407838-r34-coil-over/#findComment-6503905
Share on other sites
MaccaD2191 Enthusiast

MaccaD2191

Posted
  • Author
Posted

Okay, so I've looked over a couple of other forums posts, and I've narrowed down my search for my price range.

These are what I've come up with

http://www.pedders.com.au/products/52

http://www.isc-coilovers.com/coilovers.html

http://justjap.com/store/product.php?productid=18623&cat=422&page=9

http://justjap.com/store/product.php?productid=20209&cat=422&page=9

The last two are the same product I'm pretty sure. Its just that one is a fork type and the other is an eyelet type. I think the 1999 25GT has an eyelet type (If someone could clarify on that it would be great)

Could someone please tell me which of these would be the better one to buy? As I really want my car back on the road ASAP!

Thanks :)

Link to comment
https://www.sau.com.au/forums/topic/407838-r34-coil-over/#findComment-6503962
Share on other sites
MaccaD2191 Enthusiast

MaccaD2191

Posted
  • Author
Posted (edited)

I just had a quick look at the bottom of the suspension on my car, they have the eyelet connection on both front and back.. Which doesnt look like whats in the picture of this

http://justjap.com/s...&cat=422&page=9

Edited by MaccaD2191
Link to comment
https://www.sau.com.au/forums/topic/407838-r34-coil-over/#findComment-6503979
Share on other sites
34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

I put bcs in my 33 the other week. Seems to be going ok at the moment.

Get them from street to track. They'll be about $150 cheaper than justjap.

Exactly what i did :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/407838-r34-coil-over/#findComment-6504621
Share on other sites
Hank Scorpio Grand Master

Hank Scorpio

Posted
Posted

I've got Tein SS on my 34 now, the rears got noisy and collapsed, this is why i am trying the BC's :)

Why don't you get Fulcrum Suspensions in Queensland to rebuild them? TEINs are much better than BCs ;)

Link to comment
https://www.sau.com.au/forums/topic/407838-r34-coil-over/#findComment-6505245
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      4th gear sychro worn

      By GTSBoy · Posted

      Not R7R. Meant to type R&R, obviously enough.
    • GTSBoy
      R33 headlight relay conversion?

      By GTSBoy · Posted

      Bugger "making it look stock". I put one conventional internally fused Hella relay behind each globe. I just pulled the plugs off the back of the globes and built new loom segments with male and female plug parts to match up to the original loom and the globe, and used the original power wires to each globe coming from the switch through the original loom plug to trigger the relays. Ran a big fat (also separately fused) power wire across the front of the car to feed all the relays. It's as ugly as f**k, but it is wedged down between the headlight and battery on the RHS and the airbox and headlight on the LHS, and no-one ever looks in my engine bay, and on the odd occasion that they do I simply give no f**ks for what they think. Fully reversible - not that you'd ever want to. For f**k's sake. It's a Skyline. They made million of the bloody things. We've been crashing them into roadside furniture for 30 years now. There is a negative side effect to putting relays on the headlights. The coil current is too little to properly clean the contacts in the switches and they get blacked up and you have to open them up every couple of years and clean them manually. I have 25 years of experience on this point.
    • joshuaho96
      R33 headlight relay conversion?

      By joshuaho96 · Posted

      I was poking through the R34 wiring diagrams vs R33 and noticed that the R34 has proper headlight relays while the R33 is like the R32 and sends full headlight power through the headlight switch. I'm not afraid of wiring but I really would like to do this in a way that looks OEM (clipping into open positions on the OEM relay box) and also unlike the factory wiring which interlocks the high beam and low beam on the halogen series 1 GTR headlights I want to make it such that turning on the high beams keeps the low beams on as well. Any advice on how to locate the specific connectors + crimp terminals + relays I need? I was thinking one NO relay for low beams and another for combined high + low running off the factory high beam headlight connector. I don't really want to splice into a crusty old probably discontinued factory harness so fully reversible is my goal here.
    • sonicii
      HY51 Fuga Hybrid

      By sonicii · Posted

      Pretty sure they run the same engine as the Q50 hybrid which specifies 95 RON.  I ran 98 in mine for a while, but it made no difference in performance or economy, so I have been using 95 for the last few years.  I have never hit 6.0L/100km, but have returned mid to high 6 on the highway.  Being a hybrid, fuel economy is a lot more dependant on how you drive it.  At 110km/h, mine never goes into EV mode on the highway, so returns closer to 7.5L/100. urban driving can return low 8s if you are careful or over 10 if you are a bit more enthusiastic on the throttle.
    • GTSBoy
      4th gear sychro worn

      By GTSBoy · Posted

      About a quarter of what you want to do. It's only R7R, not R&dismantle&replaceparts&reassemble&R. ? It is stock. I already told you, you will NOT have broken those. It's f**king 4th gear for Christ's sake. You just chipped the teeth off.
×
×
  • Create New...