Jump to content
SAU Community

Recommended Posts

Some people still fit an adjustable cam gear to the factory exhaust cam.

My RB26 had just an adjustable cam gear on the factory exhaust cam from Japan.

I'll be fitting one on the exhaust cam of my NEO. I'm using factory cams for the time being with the notion of changing to after market cams down the track. I'll get my tuner to play around with the exhaust cam timing. If it so happens to be an advantage then awesome. If not then it will come in handy later on.

Some people still fit an adjustable cam gear to the factory exhaust cam.

My RB26 had just an adjustable cam gear on the factory exhaust cam from Japan.

I'll be fitting one on the exhaust cam of my NEO. I'm using factory cams for the time being with the notion of changing to after market cams down the track. I'll get my tuner to play around with the exhaust cam timing. If it so happens to be an advantage then awesome. If not then it will come in handy later on.

My NEO has the exhaust cam gear and poncams, was adjusted slightly i think!

Certainly shouldn't be on the top of your list - especially not with a stock motor - and nor should cams be near the top.

When you have done the full exhaust, fullflow air filter, fmic, bigger injectors, Z32afm, new fuel pump, better turbo, upgraded ecu you may find that with an adjustable exhaust gear only you can shift some of your top end power to the midrange.

When I had the RB25DET on about 250awkw I had mine dynoed and best result was about 3.5 deg ret from memory and it gained about 8 kw at about 3500 -4000 and a few off the top. And no didn't loctite the set screws - someone posted that they were the weak point on cheap cam gears so I went to the engineering supplies and they said they were already good quality high tensile (had the standard stamped on them) so I just did them up tight with the hex key and they never moved. No reason not to loctite I suppose once you're happy with the tune.

Hi guys,

I'm looking to get my car tunned on e85 in coming weeks and was thinking about putting adj. cam gear on ex side. Its for built 25 with tomei 256/8.5 poncams, 35R .86 etc. It's been making 470-480 whp @1.6 bar for few years and makes full boost by 4500rpm

How much gain can I expect from playing with cam gear if any?

Cheers

G.

Edited by 3BEPKA
  • 11 months later...

Any definative answer on a Exhaust cam gear for a RB25 NEO? I've got the 100k service coming up and want to know if its worth popping one on.

Still stock turbo, but will upgrade later on down the track. If its only a few KW I don't think I'll bother

Any definative answer on a Exhaust cam gear for a RB25 NEO? I've got the 100k service coming up and want to know if its worth popping one on.

Still stock turbo, but will upgrade later on down the track. If its only a few KW I don't think I'll bother

In this case, dont bother :)

Is it worth popping one on though for later on down the track with a bigger turbo/injectors?

I've read pages of old threads today and everyone has a differant opinion, most of which seems to suggest the standard NEO cams do a pretty good job without adjustment.

What gains or lack of did you guys experience?

Is it worth popping one on though for later on down the track with a bigger turbo/injectors?

I've read pages of old threads today and everyone has a differant opinion, most of which seems to suggest the standard NEO cams do a pretty good job without adjustment.

What gains or lack of did you guys experience?

I run poncams so the the adjustable gear sits at 0 and does bugger all.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi All, I'm based in Sydney and want to get hold of 4 stock R34 GTT wheel caps as pictured. Cheers
    • Haha im flattered! Although my poor boat is collecting dust in the garage, as it hasn’t been driven in like 6 months. I forgot the to put the trickle charger on too, so the battery is likely toast now.. I have the frenchys kit. It is fantastic. My only gripe was that the hard lines from the firewall needed some tweaking, however, this was mainly due to my specific turbo and dump combo. The weight and size packaging is much nicer too. I think I have some pics on my build thread somewhere.. my justification for the kit was more “why not” I had gone to the trouble to modernise just about every other part of the car..
    • Actually, ethanol has probably never been cheaper, on a tax free basis, than petrol. With fuel excise being what it is, and only being levied on the hydocarbon component, not the ethanol component, and ethanol for non-drinking purposes not being subject to liquor excise - E85 was cheaper, but not because the combustible liquid itself was particularly cheaper.
    • Maybe? If changing the cat to a higher flowing cat, caused the turbo to spool more quickly, and those areas of the map had not been tuned for the boost level it is now seeing, then yes you would need a re-tune. How dangerous it is running without the updated tune would depend on how far out the tune is with the now higher boost levels, how the engine protection has been setup, is the ECU compensating with a wideband sensor, is the boost control closed loop blah blah million other things... But yeah having said that, I wouldn't be surprised if changing out the cat for a high flow, in say a full 3" exhaust, made no noticeable difference at all. 
    • Ah yep. I asked a auto electrician about getting a cheap rebuilt alternator vs a new one. He also said he used to it back in the day but it ended up costing similar to what a new one would and recommended getting a new one,.
×
×
  • Create New...