Jump to content
SAU Community

Recommended Posts

Hey all been my dream for awhile to do a 26 powerd rx7, I know all the pro and cons, I have the engine ect ready just want to know ha some one done this in Australia????? Or tried? I'm ginna give it a hot go but abit of guidance would be so grateful so please any help would be awesome!!!

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/
Share on other sites

  • Replies 63
  • Created
  • Last Reply

Top Posters In This Topic

I measured up a series 8 a couple of weeks ago for an rb30/26 conversion.

After we spent a couple of hours going over what was required the owner decided to settle for a 20b instead.

The list of parts to be custom made was massive and very labour intensive.

Are you capable of doing alot yourself?

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6507232
Share on other sites

Really? Damn it, I was gonna get someone else to do it I want it to be perfect look amazing got a couple of people interested in wanting to do it but they havnt done it before, what was some of the custom parts? Im a mechanical engineering fitter so I work 6 days a week so not much time ether, I've got 7k budget after buying the gearbox,rb26,custom rear whell drive sump ect. Hope it's not for nothing :(

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6507475
Share on other sites

Why don't you do a LS1 mate?

Cheaper and you can buy an over the counter kit from the US for a full installation. I know someone who did it and it was flawless and you can DIY it basically as it's a full installation kit. By the time you sell all your bits + the 7k you already have - you'd EASILY have thick wad of spare change.

Lighter motor, will make 260-280rwkw with a big cam and the stock ECU can be tuned easily... Can't argue the viability in the value factor and it's a fairly rare conversion still :thumbsup:

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6507523
Share on other sites

That's true to ^^ and would sound awesome!! Haha mite have to look at that to, I was gonna go RB cause Ive had them most of my life haha, what's your thoughts or 2jz? I can buy over the counter kit for them to but they don't look as good RB :(

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6508223
Share on other sites

If your going to do a big 6 cyl conversion why not look at measuring the car up for a barra xr6 turbo.

Exhaust is already on the correct side, engine bay is long enough.

Sumps come in front or rear pan (BA/BF or FG) any aftermarket ecu can run one, parts are cheap and the engines are reliable/Grunty.

The major issue you have is engine height, the rx7 lacks depth which was the major concern with the rb26. 2jz and barra will be worse which is why the ls1-ls7 is actually a good idea.

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6509490
Share on other sites

Put the 26 in a old mustang. Dom and his boys have done it. Thing drifts awesome.

Dom is crazy! he lives his life a quarter mile at a time. Nothing else matters: not the mortgage, not the store, not his team and all their bullshit. For those ten seconds or less, his free.

Link to comment
https://www.sau.com.au/forums/topic/408045-rb26-fd-rx7/#findComment-6510084
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome Thomas! Sounds like you've made some progress. Are you able to drive it and enjoy it a bit now ? 
    • HUMVEE are fine in big open areas, but they are problematic on the street and tight areas As for reliability, some of the  US Army guys I have chatted with have said that when they were working they were fine, but, the do spend alot of time in workshops for multiple reasons, admittedly, they did get a hard time by the boys and girls who drove them I would definitely put them in the "buyer beware" category  They do look tough as nails though 
    • Just don't use ChatGPT or any other artificial stupidity for the equivalent of googling. Their demonstrated inability to discriminate reality from hallucination should be enough to make them totally untrusted. LLMs don't know anything and cannot think to even the smallest extent. They are just predictors of the next word, and that should never be confused with capability.
    • I think, given the usage model described in the OP, I'd never ever experience the wonders of the 400kW upgrade. What I really need is boost from 2000rpm and probably no more than 260-270rwkW. But I suspect that the highflow is not actually the turbo for that purpose, so I may in fact need to get a G25 or 30 or something right sized and very spooly. We shall see after it is tuned. I've had to back the boost and boost ramp off to stop the thing from pinging since the highflow went on, so I've been almost living the NA life for 9 months now! Injectors are recently in hand. AFM is in hand. Dyno is fixed. Just need to clear a queue of f**king Supras out of the way (and probably fit my new gearbox). So....some time this year? Lol.
    • For what I gather is a Sunday/summer car....braided is fine. You're not going to be left without a vehicle and you have plenty of time for inspection/maintenance. Oof. I wouldn't use them that way. They can probably handle the temperature** but the internal corrugations means that their flow characteristics are a bit shit. Lots of extra friction and pressure loss. Makes them flow like the next pipe size down. ** They are stainless, and the stainless can usually be at least something like 304L, which is pretty good at higher temperatures (unlike 316L, which I would use for a wrt/corrosive environment, but not a particularly hot environment). But the welding needs to be top notch. And even then, because you usually need at least one cone-seat end on them (because you can twist the hose and do up both ends at the same time unless one of them is a union) they can be prone to coming loose with heat cycles.
×
×
  • Create New...