Jump to content
SAU Community

Recommended Posts

Ok so after many years of abuse my poor re5r01a auto box has decided to spit second gear. So an now faced with a decision:

1. Rebuild re5

2. Buy a new re5

3. Buy an re4

as these boxes only came behind the 33 and 32 non turbos (as far as I know) they are quite hard to find I imagine (if you have one pm me).

So my question is can the re4 (which is basically every auto behind 32/33 skylines be slotted in im its place ie will the loom match up and be able to work successfully?

Thanks,:)

Link to comment
https://www.sau.com.au/forums/topic/408095-re5-to-re4-swap/
Share on other sites

would have thought their boxes were pretty strong..

might have to source an re4 + tailshaft. it should fit, since they're essentially the same box with another gear slapped on.

i'd say you'll prob need the re4 ecu aswell if you're going to have a go

Link to comment
https://www.sau.com.au/forums/topic/408095-re5-to-re4-swap/#findComment-6519185
Share on other sites

Not doing a manual swap, have much bigger auto plans in mind.

fark it all, what a pain...

Would love to find another re5, bit they aren't anywhere in qld.

They are in the S2 Stagea - usually one or two wrecking or converting to manual. Mostly they are awd but it should be a lot easier to adapt one to rwd than to convert an RE4
Link to comment
https://www.sau.com.au/forums/topic/408095-re5-to-re4-swap/#findComment-6521950
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
    • I was just going to say that it's good to see you picking up the pace again. Hope the surgery goes well. More downtime just means more time to come up with new ways of digging a deeper rabbithole  
    • How do they compare in size? I have the Yaris coil packs in mine and they work fine. But they are either bigger or sit differently so the engine cover doesn't fit anymore. Not the end of the world but not great either. Do the R35 ones sit flush?
×
×
  • Create New...