Jump to content
SAU Community

Recommended Posts

Hi all,

After stripping out the one of the project cars need to start clearing some space.

We do have some other interior bits and pieces also but just putting this up for now.

ITEM:

6 point roll cage to suit A31 Cerfiro. This is a non sunroof - around dash type

This comes bolts and plates to go straight in

CONDITION:

Good, few scratches on the paint

PRICE:

$500

LOCATION:

Geelong, VIC. Prefer pickup only. If you want post you are to organise courier as too big for auspost.

I am on here regularly so please PM

PICTURES:

Loosing put together:

DSC_0719.jpg

DSC_0720.jpg

DSC_0721.jpg

DSC_0723.jpg

  • 2 months later...

Hi Mate will this not work for a cefiro with a sunroof and if so then why?? im looking for a roll cage for my drift car at the moment and im strugling to find something in my price range and this is perfect. im in adelaide but for that price i would either pay postage or take a road trip and pick it up.. please let me know

Roof sits down lower with a sunroof and it won't fit in unless u mod the cage but it's not worth doing as it will throw the rest of the cage off where ad how it's ment to sit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
    • Nice, let me know how you find the 98 tune
×
×
  • Create New...