R32 Rb25 Powered Gtx35R Build

[AngryRB]

Brought some Bosch 1000cc injectors ready to go.

Took a chance on a ebay top feed rail kit that turned up today and of course aint close to fitting. So back on the hunt for a top feed rail setup again.

try injectorsonline.com , they sold me a cheap rail for $100 to go with my xspurt 1000's, needed a return hole welded which didnt cost much to do..

that was a topfeed rail which fit my r33 with some machining of the spacers..

[34GeeTeeTee]

try injectorsonline.com , they sold me a cheap rail for $100 to go with my xspurt 1000's, needed a return hole welded which didnt cost much to do..

that was a topfeed rail which fit my r33 with some machining of the spacers..

I think Plazmaman do a nice fuel rail now too? I ended up with a HKS item but swear i saw one from Plazmaman recently...

[nick81xd]

TIME FOR A UPDATE.

Its been a very long time since anything has happened with the car.

With all the flooding going on around town kinda had more important thigns to take care of then car stuff. With everything back up and running the car went in for injectors and a tune........didnt go to plan.

I ordered a set of bosch 1000cc 11mm injectors and a SARD 11mm rail after the first rail didnt fit, Not thinking ripped the injectors out of bags and threw them into the bench tester to check flow rates, patterns etc. Not realiy paying attention but they had sent a set of 14mm injectors by mistake. So had to order some adapters to suit and wait.

In the mean time just been doing little touch up things. Remade the catch can breather hoses in 200 series braid to match the rest of the speedflow.

Car is booked in on the 18th of april for another shot at tuning. With any luck will have some results and Then its time for the owner to fill his pants when its on boost

Spot the mistake made by a person who isnt me

how it looks currently. slowly getting there making it look tidy

[timmy_89]

awesome build. cant wait to see the results after tuning

[Rbsongate]

all your builds are nothing but top notch! this 32 came along nicely.

[nick81xd]

all your builds are nothing but top notch! this 32 came along nicely.

Thanks, it helps when mates are the one supplying the coin and you get to spend it for them haha.

[ScreamerNewbie]

Thanks, it helps when mates are the one supplying the coin and you get to spend it for them haha.

howd you manage a deal like that!? hahah

[nick81xd]

howd you manage a deal like that!? hahah

No idea, lure them into a false sense of trust i guess.

[Lithium]

Very nice - what fuel are you going to be tuning this on? The 1000cc injectors aren't going to be big enough if you are going to be leaning on it hard on E85... a chap over in NZ made 470kw @ hubs on a similar engine setup in NZ on pump gas, so a huge amount of air can be flowed through those GTX35Rs on an RB25 built to suit

[nick81xd]

Going to just be pump 98 for now until E85 is availble in town. Yeh they wont allow much tuning but by the time E85 is here 2000cc injectors will be even cheaper so can just drop them in and go.

Plan is just see how it responds on pump fuel and wind boost in until its not safely possible.

[nick81xd]

double post

Edited March 21, 2013 by nick81xd

[Lithium]

Here's a workshop blog update from a similar setup doing a similar thing, be interesting to see how your results compare:

http://sthitec.blogspot.co.nz/2013/02/rb25with-gtx3582-turbo.html

[nick81xd]

Being hub dyno they show higher number but if it can manage 400kw on 85 on a roller dyno, I think the owner will be happy.

after all he's only used to just over a responsive 300hp......will be funny to watch his reaction first time it spins 3rd

[Lithium]

Yeah the hub dyno reads higher than what you are used to - but make no mistake, 470kw on a Hub Dyno is still very big power ... that is well and truly enough to get a full weight R33 deep into the 10s with sticky tyres on BP98, I'd expect it to hit 400-420kw on a roller all other things being equal. I daren't even guess what it'd make on E85!

Without VCT that turbo was really quite laggy, though

[nick81xd]

Car is on the dyno currently as i write this post being tuned. Fingers crossed for good results

Edited April 19, 2013 by nick81xd

[Lithium]

Awesome, good luck... Should be interesting :-)

[Mick_o]

Good luck Nick looking forward to seeing some results mate

[mild r33]

Great build, how did it go on the Dyno?

Edited April 21, 2013 by mild r33

[nick81xd]

No results yet. Tuner took weekend off for family time, he doesn't take many weekends off so can't blame him. Will post results as soon as we know them

[johnbarry88]

Who's tuning it ?