Jump to content
SAU Community

Recommended Posts

OK yes I know I have an N/A atm, but I have big plans which include an RB25DET and a TD06. Anyways, I'm also subscribed onto the OzDat mailing list, and the topic of buying/making a cheap surge tanks came up.

And this link was posted as a response from one of the members

http://www.sdsefi.com/techsurge.htm

Now, my question is this:

How much does a surgetank improve the performance of an R32 with an RB25DET with say..

a) GTR fuel pump and rails

B) Bosch 440 fuel pump n GTR rails

c) GTR fuel pump and RB25 rails with larger injectors (is this possible?)

also how does the location of a surgetank affect its performance, as I know having a surge tank in your engine bay in Australia is a big no-no due to safety reasons (no fuel allowed to collect in the engine bay), so is having it in the boot any better than just running it from the stock fuel tank? Or can you get away with it by disguising it at an oil catch tank or a fluid reservoir (by not making it shiny bling bling obvious)?

Link to comment
https://www.sau.com.au/forums/topic/40842-fuel-surge-tanks/
Share on other sites

Im sure you understand how a tanks works etc... and it will just stop surge in each of your scenarios.

I dont think the scenarios affect the fact that a surge tank will help you if your intend to hit the track.

I dont understand:

so is having it in the boot any better than just running it from the stock fuel tank?

Ie, did you mean running the surge tank in your actual fuel tank?

Or

having a surge tank in the boot, as opposed to not having one at all?

The location wont affect it i wouldnt imagine.

And no, dont run it in the engine bay, keep it semi legal for your own safety and other roads users'

BTW, i'd go a Bosch M/S pump, and 550cc injectors that bolt into the stock 25 rail :cheers:

No fuss with GTR rails and stuff.

Link to comment
https://www.sau.com.au/forums/topic/40842-fuel-surge-tanks/#findComment-837799
Share on other sites

that setup u reccomended is the one you have in you're car eh Ash? If so I rikey that idea velly velly much.

And what I meant was... does having the surge tank in the boot defy the purpose of having a surge tank at all? ie would you be better of having no surge tank and just using the stock system?

More than a performance boost I'm looking to make the engine as efficient as possible with the upgraded parts (higher volume injectors n pump, bfo turbo n all). So does having a surge tank help in this instance? Or has nissan's engineering dept already thought ahead and made fitting a surge tank into a 1993 R32 a waste of time?

Link to comment
https://www.sau.com.au/forums/topic/40842-fuel-surge-tanks/#findComment-837824
Share on other sites

the BTW bit?

Yeah man, it's all bolt in stuff you can get from Japan :cheers:

No need to change rails or anything. That's added effort not required.

No, having it in the boot doesnt defy the purpose.

It doesnt matter so much where it's located.

It's too hard to explain myself when typing... I'll explain in person on Sat at the meet. :D

Link to comment
https://www.sau.com.au/forums/topic/40842-fuel-surge-tanks/#findComment-837870
Share on other sites

haha sounds good. also, higher flowing braided lines? helpful or not with fuel pumps?

I should be asking my old man this stuff lol he's a hose and valve advisor/expert for the Sydney city council and lectures on mech eng at tafe.

Link to comment
https://www.sau.com.au/forums/topic/40842-fuel-surge-tanks/#findComment-837892
Share on other sites

Here is a setup from another country, not Australia cause that would be illegal.

Basically it stops you from leaning out your nice expensive new engine when your fuel is splooshed off to one side around Phillip Island.

p.s. Ummm I mean, errr another track, not in Australia

Link to comment
https://www.sau.com.au/forums/topic/40842-fuel-surge-tanks/#findComment-837901
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What can't be done with a little bit of decking board or similar timber bolted to a hub flange via 2 wheel nuts is not worth talking about.
    • I noticed something. On the tps sensor and the sensor behind the adjustment screw is adjusted towards the far left. Are these screws supposed to be centered? (this sensor was in the same position before the tune as well)  Also attached a photo of where my car usually idles at when warm (sometimes a tiny bit above that). I think I might have screwed up the calculation and it might have better than I thought lol at 750rpm still not 650rpm though.      
    • So for both general interest of engine health, and to rule out any coolant/oil issues, I organised an oil analysis done on the 125,000klm oil Results below, all good, just a bit of fuel dilution which I'm not too worried about
    • This is actually a really good way of measuring what wheels fit. If only there was a similar measurement between hub face and suspension :p That said, it's probably pretty simple to actually measure it all with the wheel off the car for the rear. The front is a bit more complex but.. 
    • Being the top Google search result for R34 wheel-related inquiries, lemme throw down my experience. I calculated that 100mm from hub face to wheel face is about the perfect fitment for my ENR34 sedan.  I've been running 18x8.5s, ET35, with a 1" spacer. So, 8.5in to mm = 216mm. 216/2 = 108mm. 108-35 = 73mm. 73+ 25 (1" to mm) = 98mm.  If you wanna get close to this on dif widths, here are the offsets you'll want: 9" - ET around 15mm 9.5" - ET around 20mm 10" - you're crazy, but ET around 30mm All these should fit perfectly on a non-widebody, non-GTR Skyline. Note that it's probably the absolute max, and you're probably better off running a couple degrees of camber in this config, but it looks great, super flush.
×
×
  • Create New...