Bnr32 Gtr Throw Out And Pilot Bearings

[Turbz_13]

Just a quick one!

I'm having trouble trying to find a replacement throw out(thrush) bearing and pilot bush!!

Replacing my clutch with a twin plate, and need these parts to!!

Anyone know who or where I can get these from? Add what they cost? I found some im the US but that'll take to long to get here!

I have the part numbers but that's all really just need to know who sells or who can source!!

Cheers!

[nomnomv8]

Where are you located ?? Pretty sure JustJap should stock these

[MrStabby]

A new thrust bearing should come with the clutch kit.

[Turbz_13]

In sa

Need to replace my current to bearing. Cause everything coming out the pilot bush to!

I didn't buy a clutch kit

[turboedsloth]

Pilot bush should be available from any decent parts store, they are common. What brand twin is it?

[XKLABA]

find a clutch/brake shop,they should have them on the shelf, the one around the corner from me at St Marys ( western Sydney ) always has some sitting there

[kitto]

Speak to Jo, Ben or Tony at All Clutch and Brake Services. 3 Pinn Street St Marys. 8277 8122

They are SUPER helpful. I bought a new throw out bearing for my twin plate a few months back. $25 from memory, in stock.

[Turbz_13]

Cheers guys!

Its an os giken twin! I forgot the series code though! S... Something

[turboedsloth]

Throwout bearing might be the same as a Datsun 200b, the last one i did had a 200b bearing. Take it to a bearing wholesaler and match it up Or ring Otomoto as they are an OS distributor

Edited September 15, 2012 by turboedsloth

[Turbz_13]

Got the new bearing and sprocket bush!!!

Now is where the head f**k starts!!

Bearing carrier!!

I was told by the place I got the bearing and bush from to make sure I have the right one!!

I have a carrier at home! I'm not sure if its the right one! Its to suit a ecr33 gts-t!

Does anyone know if they are the same or different??

Does anyone have the measurements for the carrier that suits 32 GTR, push type clutch???

It is a fair bit shorter that the factory carrier!! But like they told me there is 4 or more carriers to suit my car!!

The overall length of the one I have is 36mm and from were the forks contact to the top was 7mm maybe 8mm!!

I believe the clutch to be a ts2b! Would you also recommend a nismo fork pivot ball for this heavier clutch??? Or would the factory one be fine?