Jump to content
SAU Community

Recommended Posts

  • Replies 103
  • Created
  • Last Reply

Top Posters In This Topic

I think what Steve-SST is trying to say is that the times he did are done on regular street tyres that about 90% of skyline owners would use. NOT semi-slick soft compound nitto's.

To me his times are more impressive because if by going by SydneyKids posts he said his nittos would attribute to 0.5second better pass over the 1/4. I think he is also trying to say that tyres you use for regular street driving wont have the same grip as the nittos.

Now we all know that the nittos are classes and accepted as street legal tyres. Thats all well and good, but just think about the fast times that Steve and his cars are running without the assistance of semi-slick soft compound tyres. It impresses me.

I think another GTR doing impressive times on 'normal' street tyres is the Brisbane Street Machines 32 GTR that ran with Federal road tyres. *cant remember its time off the top of my head, but it was damn quick

I think another GTR doing impressive times on  'normal' street tyres is the Brisbane Street Machines 32 GTR that ran with Federal road tyres. *cant remember its time off the top of my head, but it was damn quick

Yep its another very fast GTR but sort of makes me wonder how it can be called a street anything even using Federal tyres when all it runs is C16 fuel, the inside of the exhaust is as white as my arse hahaha :)

Hmmm... it's interesting to note what each of us considers a "street tyre".

I personally think that NT555R Nittos ARE a true street tyre. I use them on the rear as my daily driven rubber. I also use RE540S's as my everyday rubber on the front. Both of these are true road legal radial tyres that anyone of us can use all day everyday. Sure, they may well give a grip advantage over non semi-comp rubber, but the same can be said of top-of-the-range Bridgestone S03 and the like vs. POS retreads!

IMHO if it's a treaded radial that is road legal in Australia it IS a "street tyre" A cross-ply slick or semi-slick (e.g Mickey Thompson ET Street) is NOT a street tyre.

whatsisname

mate I agree with you 100% I also use Nittos 555R as my everyday tyres, to me its really no different then changing suspension or upgrading your turbo you do it or use them to go faster but are the cars using different suspension or other modifications not true street cars aswell?

Its like because we're smart enough to take advantage of a good grippy tyre we're cheating hahaha I think its silly

My definition of street tyre, have a look at the cheap and nasty $140 a corner tyre i use. :Oops:

Anything that costs more then the cheapest Nankang is a race tyre :)

I have only ever used the cheapest Falken (451s or something) or D01J/RE55... nothing in betwwen. Ill have an accident one day then i will see the point of having a nice $300 road tyre. :Oops:

LOOKSHUREEE!!!! You need to get up at 2 in the morning, half an hour before you go te bed and lick road clean wit toong!

Ahem!

unlike the screamer pipe and most likely the other 20 modifications on most of our cars that are running the times :)

Screamer pipes? Oh you mean the people running the times with bigger turbos.... okay :D

Adrian

i'm sure there a heap of things we all do or use that technically make us not a true street car

I don't have a TRUE street car because I use or have used:

1/ Nittos

2/ Nitrous

3/ VHT On the track

4/ A level drag strip

5/ Buster as my pit bitch

As you can see, I am a dirty friggin cheaterer!!!

Adrian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • TBH, it sounds like the threads on the bolt are fubar in a specific section. Most likely as you've been working it back and forth it has torn threads out, as you loosen the bolt, this section enters the nut, now you're spinning a round shaft inside the nut, there's no threads here.   Use something similar to a claw on a hammer that will fit either side of the bolt head and try to apply downward force while also undoing it. The idea is to attempt to catch a thread, or just rip the f**ker out. Caution on ripping out, as it could bend/maime/mangle what the captive nut attaches to. If the captive nut is actually okay, you could do the dirty part of cutting the head off the bolt, then cut a slit in the end of the thread that's now exposed and then screw it up and into the area the captive nut is until it falls out the other side. However, this does risk the remainder of the bolt rusting over time and damaging near the captive nut and also making it rust. However, so can cutting pieces of panel work out to access this area if you don't reseal it properly.
    • Well, every piece of information on that part when you track it back to Nitto says it's for a KIT of theirs. It is also designed thicker to be stronger. And they speak about a specific harmonic balancer bolt they supply for the whole setup.
    • Techniques for removing stuck bolts are: hitting the bolt head with a hammer, heating the bolt to red hot then letting it cool and working it back and forth like you are already doing. AFAIK the idea is to try to crush whatever material is stuck between the threads (and heat also melts locktite but that's almost certainly not relevant in this case).
    • Yuh, I think it works with the Nitto gear only. I presume that you're not also using the Nitto gear? Watch the video. Compare the interface between the Nitto gear and washer (on the gear side) vs the stocker and decide if you think the Nitto gear is different from stock there.
    • Liking the new charger, battery all good (I think).   Also like how you can put it in power supply mode too. Will troubleshoot with that sometime soon.
×
×
  • Create New...