Control Arm Bushes?

[dan-0]

Hey guys

Took my car to Pedders and done a 28 point check. They said my rear wheels are rattling around due to worn bushes.

Im on the hunt on ebay for replacement bushes. Can you guys confirm theses are the correct names?

[Hank Scorpio]

Yep, those are the correct names.

Unless your car is lowered and you want to replace the complete arms with adjustable items (or at least the upper which does camber adjustment) I reccomend supply and install SuperPro Polyurethane bushes (which is what I sell)

SPF1869K - Rear Upper Control Arm Bushes (Inner and outer bushes the same part #) - these are eccentric bushes which allow for extra camber adjustment.

SPF1750K - Control Arm Lower Inner Bushes

SPF2933K - Control Arm Lower Inner Bushes (suits 40mm wide housing with 31.5mm ID)

Edited September 8, 2012 by Hank Scorpio

[dan-0]

looking at the Pedders report is says "rose joint in hub worn and knocking $200

I THINK he was pointing to the joint with the green arrow. Does this sound right?

When I crawl under the car and get the missus to jiggle the wheel, the only thing moving is the green arrow joint.

Edited September 8, 2012 by dan-0

[xALmoN]

think thats the hicas thingy.

[GTSBoy]

That joint is famous for wearing and causing steering wanders. It's the outer HICAS tie rod end.

[WMDC35]

this thread covers this

http://www.skylinesaustralia.com/forums/topic/408239-what-are-these-called/

[dan-0]

Sweet, I have ordered new ball joints front and rear!