Jump to content
SAU Community

Recommended Posts

just wonder how i can go about testing my VVT on my neo to make sure its working as normal? i tried to find some write up on the internet but nothing. what parts do i need to make sure are installed? like solenoids and stuff? this is a r32 swap so i dont know if i have the necessary parts installed or not.

any pics would help also

thanks guys

Link to comment
https://www.sau.com.au/forums/topic/408973-how-to-check-vvt-rb25det-neo/
Share on other sites

Is the car driving? Easiest way is to unplug the VCT solenoid, which is this little guy on the front of your intake manifold with the redish-brown coloured plug:

post-9523-1156112458.jpg

Then take it for a drive and see if it feels any different. Another way, which will work if the car isn't driving, is to download a program called Nissan Data Scan and buy a CONSULT cable, then you can switch off the VCT that way.

Couldnt you just listen to it? When the cars at normal operating temperature, open the bonnet and rev the car up slowly. When it reaches 1500rpm (or whenever it activates) there will be an audible click. Or put your hand on the solenoid while you do it and you will feel it for sure.

Couldnt you just listen to it? When the cars at normal operating temperature, open the bonnet and rev the car up slowly. When it reaches 1500rpm (or whenever it activates) there will be an audible click. Or put your hand on the solenoid while you do it and you will feel it for sure.

It doesn't activate in neutral.

Couldnt you just listen to it? When the cars at normal operating temperature, open the bonnet and rev the car up slowly. When it reaches 1500rpm (or whenever it activates) there will be an audible click. Or put your hand on the solenoid while you do it and you will feel it for sure.

It doesn't activate in neutral.

you should be able to hear it click just past idle

mine activates in neutral

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You know, that is exactly the thing that I was thinking a coupe of hours ago. I even had a plan for a meme, involving one big one, another big one, and the Old El Paso girl saying "¿por que no los dos?"
    • NoS, 2 of the big ones.
    • Oh, that's grim. Something bad has been happening there.
    • Put an endoscope down the hole and saw this. Not quite all around the bore but a good 60% at least. Chin to the chest and towards further disappointments I guess.
    • 2 does "sort of" applies, maybe......but looking at what parts would be needed for the swap to get engineered, registered, and insured, and basically that's everything under the car, the modifications the make it legal would be problematic and horrendously expensive, all for a street car that just cruises around and hits a few twisty roads on the weekends Also, from looking at the NSW rules and Regs, with all modifications that is required just to make the car safe and not twist itself to pieces, and then actually get registered for street use, may still be impossible nowadays As for 1, when you add in a fresh engine, fresh transmission, rear cradle and diff, tailshaft, suspension, brakes, cooling, and all the other fabrication required, your probably looking at up to $100k to do it right, all for a 20 year old MX5 that is over engineered and you would never be able to actually use the power it has on the street, much like your beastie, which I love, but you actually track that thing and can use all of its powers in anger, in a safe environment  Hell, the old Bogan Cruise Ship had more power than I could use on the street, and in hindsight, I went a bit silly on that thing, it didn't really need the 500hp it had for what I actually used the car for, it was fun, but basically unusable on the street if you value your licence  As for cams, yeah, I'll probably book it in for them to get installed and tuned soonish, like next month after MX5 Mania are back at work....... and yes, I've already sent a email to bin the turbo quote and quote instead to install cams and a new Fluidampr balancer that will suit the 2.5 better than the OEM 2.0 balancer that is swapped over for the 2.5 install, as the balancer needs to get pulled to time the cams it's a while your in there sort of thing I did think a bit about flex fuel for a laugh, but being na, and no where really around locally anymore to get E85, I've binned that idea, so no sweet sweet corn smells are set for the car I wish E85 was more of a standard fuel, it's better for the environment, better for tuning, plus that sweet sweet smell we all love As for fitting in the family, that's not needed, as everyone in the family already owns a car that can seat 5 humans comfortably enough, the MX5 is "my toy" As for buying a car that is already built, nah, I would rather pick and choose my parts, I enjoy the process, and in the big picture, the additional cost is well worth the enjoyment, and the occasional frustration, I get out of doing it, albeit with other people spinning the spanners, and me, just paying the invoice 🤣
×
×
  • Create New...