Jump to content
SAU Community

Infiniti N Sydney

wizlb

By wizlb,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

wizlb Rising Star

wizlb

Posted
Posted

A GOOD CONTACT AT THE SYDNEY INFINITI DEALERSHIP

The G coupe and convertable will be in Sydney at the Autoshow and the price should be set then.

I saw the M models Base price which is 84K without drive way price.

If we take a moment and look at the price of the M and I would say the price of the G Coupe shoud be 10K less.

The G price is $10K less then the M.....

If you are looking to get a M or the FX.....contact Steven and he can send the car to your doorstep....someone has purchased A FX from Melbourne, already.

I hope this help those looking to upgrade to a brand new G 37 Model......

____________________

Steven Teixeira

Infiniti Consultant

Infiniti Centre Sydney

134 William Street

East Sydney, NSW 2010

Phone: (02) 8356 6888 Fax: (02) 8356 6889

Mobile: +61 414 464 461

[email protected]

Infiniti-sydney.com.au

Link to comment
Share on other sites
sonicii Veteran

sonicii

Posted
Posted

the on road price for the M starts at above $94k. if the base price of the G is $10k less, then you are still looking at over $80k driveaway for the G.. but since the 370z starts at around $74k driveaway, there should be a good number of buyers willing to pay an extra $10k for a 'luxury' verison of the 370z.

Link to comment
Share on other sites
wizlb Rising Star

wizlb

Posted
  • Author
Posted

And thats the walk in the door price......and they will want us to upgrade from our models......and what kind of trade in price will give us....but this is more important....how much will our cars loss in value during the first year of the G's release

Link to comment
Share on other sites
scarf Proficient

scarf

Posted
Posted

find it hard why people buy a car new. 80K as a base price is a lot of money. Sounds like with a few additions it will be closer to 85K.

I'd rather put another 15-20K on top and buy a 2009 R35 or get a used e92 M3.

Link to comment
Share on other sites
sonicii Veteran

sonicii

Posted
Posted

I have never bought a new car, and probably never will.. wait a couple of years and buy one with a 40-50k km on it with a good service history for 50% of the new price. the new car smell and feel isn't worth that much to me.

Link to comment
Share on other sites
t5iv Grand Master

t5iv

Posted
Posted

When you can claim interest and depreciation from tax, it makes sense to buy a new car. The only reason you wouldn't is because of the heavy depreciation in it's first few years but if the ATO will cover that for you.... why not?

Link to comment
Share on other sites
Seano350GT Veteran

Seano350GT

Posted
Posted

I could debate the advantages and disadvantages of buying new & used for hours, but basically you won't lose as much money buying used as you will new. Only problem is with a used car you have no idea where it's been, who's driven it, what it's done, where it's been, and most likely you won't have any warranty.. Luckily there are things like a REVS check and a good mechanic that can fill in most of the blanks.

Either way, you will lose money buying new or used.. the older your car gets and the more km's you gain the more money goes down the drain, you just have to deal with it.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Does anyone know whats happening with harness on drivers door?

      By GTSBoy · Posted

      The two diagrams are equivalent. The R32 one is just one sheet out of about 3 showing everything in the whole car all at once. And without knowing the functionality that occurs in the modules, they are both equally opaque.
    • Neostead2000
      R35 OEM Injector dead times

      By Neostead2000 · Posted

      8v - 2.48ms 9v - 2.15ms 10v - 1.74ms 11v - 1.41ms 12v - 1.15ms 13v - 0.99ms 14v - 0.89ms 15v - 0.82ms 16v - 0.81ms I'm running these values on my RB20 Neo with 570cc Denso R35 stock jets and it's great. Also bought a set for my Legnum VR4, love these injectors!
    • harambe34
      Does anyone know whats happening with harness on drivers door?

      By harambe34 · Posted

      Thanks for your reply,  Those blue/green wires running to the actuator aren't attached to anything, so I'm not sure how the central locking is still working. I will have to take a good look tomorrow, I don't have the car with me. After googling it seems like a pretty common aftermarket actuator which even uses the same green/blue wires the immobiliser required. i'll test everything tomorrow and if it's working i'll melt the solder, strip it, resolder and neaten it all up with some heat shrink. I don't have to understand it if it works hahaha I just don't want a fire/ short circuit. That R32 diagram looks more like a continuity chart? Can you make sense of this form the R34 manual? 10V is probably due to very flat battery, i'll recheck as well tomorrow, I did have to jump start it haha. Thanks again!  
    • GTSBoy
      Does anyone know whats happening with harness on drivers door?

      By GTSBoy · Posted

      So, COM doesn't mean comms. It means common. What common itself means will depend on the type of device. For a two directional actuator (ie, one that can push and pull on the same output rod) then the common will typically just be the earth connection. There will be at least 2 other wires. If you put 12V on one of the other wires, then the actuator will push. On the other 12V wire, it will pull. Can't quite make out what is going on with the wiring of your actuator. It appears to have several wires at the actuator plug, but there only appears to be 2 wires where its loom approaches the door control module, with at least one of the others cut off. I don't know these actuators off by heart. I'd have to look at a wiring diagram for one before knowing what the wires were about, and that's despite me having to replace one in my car not all that long ago. Just not interesting enough to have dedicated memory set aside for trivia like that any more. That actuator is an aftermarket one, not the original one, which probably died and was replaced. That might require some sort of bodge job on wiring to make it work. Although nothing should justify the bodginess of the bodge job done. As to the soldering job on the door module's loom plug. Ahhahhahaha. Yes, very nasty. Again, I cant tell you what any of those wires do. You'd need to study the R34 wiring diagram (if you can find one that shows the door module). I don't think I have any. I'd have to study the R32 diagram to start to understand what mine is doing, and again, even though I've had a problem with mine for the last 25 years (where it locks the passenger door when the driver's window reaches top or bottom of travel) I'm just not interested enough to try to to work it out. So long as it's not burning down, it's fine with me. Here's the R32 GTR diagram, which, confusingly, has rear door lock actuators and window motors on it!! As you can see, unless you understand the functions of the door lock timer and the power window amplifier, you'll never be able to work out how it works just from the diagram. I don't imagine that the R34 one is any better. Hopefully an R34 aware bod can help. FWIW, the two wires that are cut and joined look like they are both power supply - so hopefully it is not fatal to join them. The 10V you measured on the cut off free end of one of them is concerning. You'd expect 12V, and it might be the reason for the bodge job joining them together.
    • harambe34
      Does anyone know whats happening with harness on drivers door?

      By harambe34 · Posted

      Oops my bad, here you go .
×
×
  • Create New...