Jump to content
SAU Community

Central Locking Problem - R34 Sedan

RTHRTY3

By RTHRTY3,
in Western Australia

 Share

Recommended Posts

RTHRTY3 Rising Star

RTHRTY3

Posted
Posted

Need some help...my central locking finally sh*t itself and decided to give up and stopped working 90% of the time...i.e. both manually and remotely. Im suspecting its the motor...

Please let me know who/where/how i can get this fixed or DIY (where to source parts- type/model #)??

:cheers:

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/409019-central-locking-problem-r34-sedan/
Share on other sites
260tech Proficient

260tech

Posted
Posted

Sounds like low voltage/high resistance (causing voltage drop) via central door lock circuit. I am assuming keylock cct (manual) & internal central locking cct (remote) have seperate power feeds to door lock master control relay. You could try replacing driver's door master lock switch, (if this is the one you refer to as "button & inside lock") Yahoo.jp or local wreckers could supply, maybe even Nissan Oz in support of the locally assembled Skylines..........dunno. :ermm:

I have had trouble with power window switch in the past, not related but same switch manufacturer, resistance checks on contacts came up fine (showed no obvious fault) but replacing switch fixed it. Wierd.

If your keyless remote is also not working as it should & battery (for remote/keyring) is known to be good & the above remedy does not fix everything you are looking for a dodgy relay in the remote locking cct., I think.

Get cct diagram (door locks) for your car model & go see your friendly local auto sparky unless you are confident in correctly locating & swapping out relays without causing further problems yourself.

Cheers GW

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • r32-25t
      R33 fuel setup

      By r32-25t · Posted

      I used the radium thing, makes the whole parallel assembly a lot more compact compared to any other way of doing it 
    • TurboTapin
      R33 fuel setup

      By TurboTapin · Posted

      Racetronix also sells those ethanol content sensor bypass blocks. Adapter, Flex-Fuel E85 Sensor High-Flow Bypass, In-line No Sensor (ADF-FLEX-NS): Adapters - Flex Fuel | Racetronix Ethanol content sensor are originally designed to be on the feed line. These bypass blocks are meant to be ran in the feed line and not return. The continental ethanol content sensors have a 3/8" ID and not 5/16". This is why they are ran on the return line directly in conjunction with a low threshold sampling value VS in the feed with one of these blocks.    Haha we think alike, I used both original feed/return for 8AN feed, and one of the Hicas lines as a 6AN return. I also capped off and left the other Hicas line as a spare. 
    • -Jimmy-
      R32 gtst speedo out by 10kph

      By -Jimmy- · Posted

      Interesting, I haven't read about the issue with oil getting into the speedo in the cluster before. I'll have to take more notice with mine. The speedo on my R32's when I've run factory diff and tyre size have never been accurate as far as I can remember. The non Type-M GTS-t did come with 15" 5 stud wheels and smaller brakes, but that's less than 5% of them.
    • -Jimmy-
      My R32 Money Pit & The Headaches That Come With It

      By -Jimmy- · Posted

      Good to hear the condenser you picked up off my brother worked all good. Do you think there could be an issue with your AC compressor itself or the clutch on it then? I don't know a lot about them so I can't really help but keen to hear what it ends up being. Keep the build thread going man, it's nice to look back on over time.
    • Lithium
      Shoota's R33 GT-R RB30/26

      By Lithium · Posted

      This is a story of my life things, I learned eventually (thanks to someone calling me out) that my enthusiasm for discussing and sharing ideas that it came across as arrogance and I'm like... WTF?!    One thing I'm pretty sure I justifiably pride myself on is knowing that everyone will have things they can teach you, and you're always going to find out that something you think you know turns out wrong - you just don't know what it is until you get there.   Just the bursting enthusiasm that comes with ADHD when you hit something that gives you dopamine dumps can come across like you think everyone else is wrong or don't matter. But yeah, I'm a software engineer by trade and also do tuning in weekends and 100% have long had a reputation for  quickly making connections when resolving problems or forming solutions that I've sometimes had to take people form a long walk from start to end to explain how I ended up where I did when it's seemed "too simple" when I've stated my initial case, and had the "WTF" type reaction when they've realised how much was actually considered haha.   My reward is that I get all the curly problems thrown at me.
×
×
  • Create New...