Jump to content
SAU Community

Burnout With V35 300Gt

Irsyad

By Irsyad,
in V Series (V35, V36, V37 & Infiniti)

 Share

Recommended Posts

Irsyad Rookie

Irsyad

Posted
Posted

Hey,

Can i do a burnout with my v35??..cuz when i do it my rpm stays at 1500 even if i slowly hit the brakes still doesn't do anything..is it VDC??? how do i turn it off no button!!! Or is ther another way to do it....on youtube i see g35 doing a burnout..

Link to comment
https://www.sau.com.au/forums/topic/409022-burnout-with-v35-300gt/
Share on other sites
The Max Mentor

The Max

Posted
Posted

Banana peels. It's all about the banana peels. I recommend the Cavendish bananas from Coffs Harbour. They have the right cellular structure to allow sufficient slip on bitumen whilst preserving the rubber so you still have plenty of tread remaining.

Kolossus Proficient

Kolossus

Posted
Posted

dude, i did burnouts in my 300GT for at the drags just hold ur foot on the brake in drive, load her up and let her rip, she pulls hectic one leggers. (not kidding they are totally better than commodore single leggers)

gkzlah Collaborator

gkzlah

Posted
Posted

Banana peels. It's all about the banana peels. I recommend the Cavendish bananas from Coffs Harbour. They have the right cellular structure to allow sufficient slip on bitumen whilst preserving the rubber so you still have plenty of tread remaining.

Coffee came out my nose reading this..

t_revz Grand Master

t_revz

Posted
Posted

BANANA PEELS!!!!

(Memories of Mario Kart's Rainbow Road come flooding back)

I've got this on PC. Top time waster!!

^^ I hope you were drinking coffee at the time.. or you might want to see a doctor about that! :)

Haha gold!

180 wanabe Proficient

180 wanabe

Posted
Posted

Even if you turn off VDC your going to have a hard time doing a burnout in an auto V35

Reason being is as a safety feature

When you press the accelerator and the break pedal at the same time, the the engine has its power cut to about 20%. Why you ask? well remember not so long ago all those people in Toyotas in the US who had their cars accelerator jam and then ended up driving along at 100mph+ to their deaths as they were too stupid to turn the key to the off position or move the gear stick into neutral. Most cars these days have engines powerful enough to overpower the brakes and as the brakes get hotter unless your running high temp pads the less they work. The whole idea is that if your pedal gets jammed as soon as you press the break pedal the engine has its power reduced to a level that the brakes are able to deal with and slow the car down

Now you wonder how dose one bypass this in order to do a burnout?

Pull off the fuse box kick panel in the car and remove the brake light fuse, now this may take some trial and error if you cant read Japanese

Once the fuse is removed the car wont know that you are pressing the break pedal and allow 100% of the cars power to be used

As you may notice by my avatar I may have had some experience doing this myself :P

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      RB20 in need of modest love injection

      By GTSBoy · Posted

      As you're looking at using a Link ECU, then large injectors are not a problem. But there's not really any need to go 1000s on an RB20 unless you're planning >>600HP on E85, which would seem unlikely. There are other options for injectors. The Xspurt ones are available from a number of places and you can get them in the mid 600s and 725cc, which is probably a sensible place to be. These are all EV14 based. If you are not using the stock AFM (at all, which would be the case with a Link) then a large turbo intake pipe to suit the ATR turbos is not an obstacle, so you should use one instead of a highflow. Results will be better.
    • QB6SAGR
      RB20 in need of modest love injection

      By QB6SAGR · Posted

      Hey guys,  I'm after some advice and this here is the best place to get it imo. I was a member a looong time ago under another account, with a lost email address. Its nice to jump back on and see some of the same names still giving good advice.  I mothballed my car when i moved to perth in 2013, and after getting towed across the nullabor a few times it has officially done more km's on a trailer than under its own power. Now that i have started the process of tidying up and modifying it, i see the fruit available (and the fruiterers selling the produce) is different than back in the day. hence my questions, as i used to 'know' what to get and now, i'm not so sure. Engine wise the car (92 gtst) has a walbro 255, k+n, fmic, cam gears and and turbo back 3"exhaust. Wish list is a Hypergear high flow or ATR43G1, Link G4x and some newer injectors before a tune up. My goals are modest, only low 200's power wise. i know i could achieve this with less, but i've been swapping out old for new where i can. Every cooling hose has been replaced, along with mani gaskets, WP, thermostat and radiator, fuel pump and timing belt, tensioner and idler, and i rebuilt the steering rack. Regarding the injectors, the fruiterers all seem to sell what used to be considered quite large injectors. There are a lot of options for bosch 1000cc EV14's, and i would like to know if that is a suitable choice for my build. Is modern injector design good enough to run these at the low duty cycles that i likely would be? is there a downside to running a too large injector these days? or, would there be an upside to running a smaller injector at higher duty cycle? I can see that there are smaller injectors still available, but the ones i have seen specifically marketed for RB's are pretty large (see: https://golebysparts.au/collections/fuel-rail-injector-kits/products/nissan-rb20-fuel-rail-bosch-980cc-1150cc-injectors-turbosmart-fpr800-regulator-kit), and i dont know enough about them to say one not marketed for RB's would fit or not. I have searched the forums, and amongst all the posts on older tech, I did see gtsboy recommend EV14's, but no size was mentioned... again, i'm not clear on if the smaller size bosch injectors are also EV14's as they do look similar.  also, if someone can recommend a tuner familiar with RB's in the Geelong or West Melbourne area i'd appreciate it. Thanks in advance guys. Cheers, Rowdy  
    • Duncan
      R33 GTR lift points for hoist

      By Duncan · Posted

      FWIW the depth of the groove in the rubber pad is not super essential, the blocks are rubber and squish a bit. If you are worried an angle grinder will make a deeper groove quick smart
    • GTSBoy
      R33 GTR lift points for hoist

      By GTSBoy · Posted

      I mean, if you were to move the jacking points away from the original location, that is, away from the wheels and closer to the centreline of the car, then it will be more likely to overbalance and tip off the supports. Same as we talked about before. I was talking about moving for-aft. If the sill is bent outward or inward, then the car would obviously look unstraight from the outside. Hopefully that hasn't happened either. Again, you can do comparative measurements from the chassis rails to see if there is much deflection.
    • sunsetR33
      R33 GTR lift points for hoist

      By sunsetR33 · Posted

      Can you elaborate what you mean with your first sentence? I meant move as in the bulge kinda seemed like it got pulled "outward" meaning it got pulled down and to the side with the jacking rail itself, so the load bearing bulge now sits lower than usual and is not level with the sill on the other side of the jack point. Either that or the jacking rail just got pushed in a good bit.
×
×
  • Create New...