Jump to content
SAU Community

Transporting Car From Victoria To Queensland


Recommended Posts

I have purchased a car in Victoria and am looking to drive it up to Queensland. The only problem with this is that the car is unregistered however, it will have a RWC. I have been given a few options of ways to bring this car back.

1. Get a Unregistered car permit, allowing me to drive back with an unregistered, yet roadworthy car.

2. Pay the seller to register the car again and get the registration swapped into my name, transport/drive the car to QLD. Do a RWC in QLD (non-qld RWCs are not accepted)

- Register the car and pay the usual fees (rego, stamp duty, plates...).

- Hand in the VIC plates to Queensland Transport. They'll issue a receipt. Fill out a refund form (downloadable from the vicroads website), attach the receipt, and send it to vicroads.

- Wait 4 weeks for the cheque.

3. Shipping the car back (expensive).

4 I have heard of someone, somehow registering the car in Queensland, taking down the Queensland plates, putting them on the car then driving it back.

If anyone has done this or has any ideas of what the best course of action is let me know.

I would still go shipping for 1600. Add up fuel, permit fees, accommodation, chance of breakdowns or accident on way. Althouh it is a great drive and who doesnt love a road trip. But financially wise, yeh i would ship it

Can you purchase CTP for six months as per normal (and carries over after registration)and still drive with a unregistered vehicle permit? I am looking at doing the some thing in a couple of weeks.

  • 2 weeks later...

So spoke to vic roads and all you need is an unregistred vehicle permit from them , cost about 43 bucks initially and a dollar or so for each day after that, this also apparently covers ctp. the car needs to be in good enough condition to drive on the road but no rwc is required. the only hassle i can see is that it looks like you can't drive at night on the permit

So spoke to vic roads and all you need is an unregistred vehicle permit from them , cost about 43 bucks initially and a dollar or so for each day after that, this also apparently covers ctp. the car needs to be in good enough condition to drive on the road but no rwc is required. the only hassle i can see is that it looks like you can't drive at night on the permit

Hey mate, you pretty much have it spot on. Victoria luckily seems to be the cheapest state to get one of the permits from, the condition of the car has to be 'safe'. Also I organised the permit so I can drive at night. I just explained that I will most likely be driving past the times stated in the permit, as I have certain stops to make. The lady was actually very helpful. The permit was emailed through to me and I was told to put the permit on the left side of the windscreen.

If you have any questions Andrew send me a PM.

I don't envy you, that is one boring drive lol.... Did Cairns to Central Coast solo with a car trailer etc and don't wanna do it again! Good luck tho and keep an eye on all the speed cameras ;)

I don't envy you, that is one boring drive lol.... Did Cairns to Central Coast solo with a car trailer etc and don't wanna do it again! Good luck tho and keep an eye on all the speed cameras ;)

i did sydney to hervey bay in feb, i rented a hilux and a trailer and put the 32 on and set off.... so boring so make sure u got some good tunes and shit to keep you going.

I recently had to do this. Drove an unregistered car from Sydney to Brisbane. Had to get a blue slip in NSW ($57), take it to the RTA and get an Unregistered Vehicle Permit ($23ish), drive to Brisbane ($150 petrol + smokes + Red Bull), get CTP (I accidently negated this step as the info I was provided with was incorrect), drive to get safety certificate ($90), go to TMR and register vehicle ($400ish for 6 months incl CTP).

Hope that gives you a better idea. :)

I've just been looking into this myself

I'm coming back up to the GC after another year of uni and had a wicked brainwave

I thought yeah, i'll get the car transported up and fly so i don't have to put up with the BS long drive

well, CEVA are really cheap at the moment but won't let you have anything in the car which is a deal breaker for me so i'll be driving up (car is fully rego'd tho so no issues there)

anyway, enjoy my spreadsheet

all most prices there are depot to depot (melb to bris)

with CEVA being only $500 when i checked the other day

Car Freight Quotes.xlsx

I drove from Sydney to Mackay (roughly 2000km) in 2 days in a shitty old VR commodore 2 years ago. I didn't have a licence at the time as it was suspended BUT i had NO IDEA as i moved residency and didn't get any letters saying that i had no licence. Car was in a very bad shape too, can't beleive i made it without a licence in a shitbox old car.

But back on topic, that's some useful info for anyone else that decides to purchase a car interstate.

I've just been looking into this myself

I'm coming back up to the GC after another year of uni and had a wicked brainwave

I thought yeah, i'll get the car transported up and fly so i don't have to put up with the BS long drive

well, CEVA are really cheap at the moment but won't let you have anything in the car which is a deal breaker for me so i'll be driving up (car is fully rego'd tho so no issues there)

anyway, enjoy my spreadsheet

all most prices there are depot to depot (melb to bris)

with CEVA being only $500 when i checked the other day

cost me 1400ish to get a vr calais to sydney from harvey bay thru ceva,last 18 months ago i filled that fkkker up and drove it on the truck and flew to sydney then picked car up and went and emptied all the parts i had in it then delivered the car. 500 sounds awesome.

Drove mine from Melbourne to Townsville. Still had VIC plates and rego on it. Got a RWC in QLD and registered in 2 weeks.

Only damage I got was scrapped side skirts and front bar cos it was low. But my painter fixed it real easy. Make sure u have a mate with you. Driving by yourself is boring as hell and bit risky. :thumbsup:

Drove mine from Melbourne to Townsville. Still had VIC plates and rego on it. Got a RWC in QLD and registered in 2 weeks.

Only damage I got was scrapped side skirts and front bar cos it was low. But my painter fixed it real easy. Make sure u have a mate with you. Driving by yourself is boring as hell and bit risky. :thumbsup:

For long drives, best thing is to have someone with you. Mine's a sedan so we had my brother, a mate, and myself. One would snooze in the back whilst one drove and the other chatted sh!t. Good fun and was a simple matter of everyone swapping spots every 2-3 hours.

Well I'm flying down today to pick up my car from Melbourne and drive it all the way up to Queensland with a unregistered vehicle permit. I will let everyone know how I go or if I come across anything.

Okay, made it home around 2:30am this morning. Surprisingly did not get pulled over once, even though we traveled through 3 states with no plates. Funnily, the person who showed the most interest in the car was a fuel station attendant, asking if we were going to do a 'runner'.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Right, here's a video of the basic operation at least.  This is what you can expect day to day when you turn the car on and it boots from standby.  The only thing from a media point of view I haven't gotten working is for it to autoplay plexamp when it turns on from standby (it works from cold boot) but that's more of a plexamp problem as it will autoplay other music players.  Also attached is my one stray cable.  It's part of the screen's wiring adapters but there's just nowhere for it to go in my car.  I've just now done a bit of research and found a matching port on a 2010-2014 head unit with BOSE.  Mine has no BOSE so that's that case pretty much closed I think.  Plugging in the Infiniti AC panel basically did nothing for me, so that's a dead end as well.  Next port of call is to mess with this CANBUS module and see what I can find from it.  I found this resource containing the DBC files for a 2010+ G37 : https://github.com/icecube45/Dash_InfinitiG37/blob/master/InfinitiG37.dbc I'll now have something to go from when I try to extract my CANBUS data so I can see if the HVAC Mode, Fan Speed, Temperature, etc. match and also the gear shifter position.  It's a pretty big assumption that it's just mismatched CAN signals but considering all the devices in the CAN network are talking to each other (AC can be fully adjusted just with no info on screen) it might be a safe one.  I will report back WhatsApp Video 2025-02-26 at 12.49.10.mp4
    • Thanks for that Paul.  Do you think if I posted a picture you'd be able to remember where it went? 
    • Sorry Duncan, I didn't get a notification for the replies.  Thanks for responding!  It's a full Android device, but does allow you to use CarPlay/AA as well.  This is the one I bought from NaviRS on AliExpress: https://www.aliexpress.com/item/1005006368602668.html?spm=a2g0o.order_list.order_list_main.111.59aa1802JDzQ0E - the 2K 8G-256G CAM variant but it seems to have gone up by £170 since I bought it!  My purchase was £307.14.   It's not the fastest thing in the world but performs perfectly adequately.  It stays on standby unless I disconnect the battery and let it power down, then it's just a fairly standard Android bootup time from cold.  The DSP Equaliser is very nice and made the standard stereo system sound pretty decent compared to the stock screen.  Perhaps I can take a video of it when I get a sec. It *allegedly* supports the reverse camera, but I'm yet to get that working.  It has options for reverse cam (a camera unit can be bought separately) or 360 cameras (also bought separately).  To be fair it doesn't seem to detect that the shifter was put into reverse but I'm working on a theory about this as well.  At the moment I'm going without which is a bit annoying considering the car is an absolute canal barge but so far I haven't caused any damage I'll grab a picture of the wire I'm missing later today when I can get outside.  My theory, by the by, is that not only is the head unit different, but the CANBUS network has different signals for the different years.  I think this because I have a spare AC panel from a newer Infiniti G37 (as opposed to my Nissan panel) which wouldn't control anything except the volume when I had it wired up with the stock system.  I'm going to throw it back in and see if the screen will respond to it.  I've just ordered an arduino CANBUS module so I can have a look at the signals going around the car and see if I can spot anything.  I'm thinking if I can work out what it's expecting vs what it's getting I might be able to translate and relay the signal back but so far just a theory anyway. I also found this on my travels, so far the only one that specifically matches my car: https://www.aliexpress.com/item/1005002822934280.html?spm=a2g0s.imconversation.0.0.33433e5fgttovi If you look at the picture of the before, it has the card reader slot, and the picture of the head unit is exactly the same as the one pictured in my original post.  I asked if they sell the cables separately but sadly they won't.  I didn't want to just buy this one because it's a super old Android version and only dual core - likely slow as hell. 
    • As above, you did refill the coolant and burp the system before running it again didn't you?
    • To be fair - you see the same thing for every clutch. There's always someone making an installation error.
×
×
  • Create New...