Jump to content
SAU Community

91 32 Gtr Whole Car But Blown Motor(Dropped A Valve)

13thracer
 Share

Recommended Posts

13thracer Rising Star

13thracer

Posted
Posted

Selling this for my Uncle he has the car car for over 8 Years but a few years back it dropped a valve and has been parked up ever since with intentions of fixing it.

Basically it a 91 R32 GTR. Paint is in good condition except for the LHF guard where the clear has pealed away, Suspension has a set of Unknown Japanese Coilovers in it cant see what brand as the stickers have faded they are purple but dont think the HKS. Has 17in Sparco wheels with brand new tyres on them. Iterior is good condition aside from the door trims missing the speaker grilles and the usual tear on the drivers seat base. Has aftermarket fuel pressure reg and fuel pump Other than that its pretty much in standard form and standard ECU

The Engine was a completely rebuilt RB26 with brand new block and crank with a set of forged pistons, upgraded oil pump restrictors fitted and oil return pipe of the back of the head and all the associated stuff bearing gaskets etc... only done barely 5000ks when it dropped a valve sitting at a set of lights. His mechanic informed him that it would need a new number 4 piston and the head overhauled or replaced which ever was cheaper. Also has a net of N1 turbos hanging off the side with standard dumps but full exhaust form Y piece Back, again unkown Japanese brand but is 3.5inch from cat back.

He would like to sell the car complete as he doesn't really have the resources to wreck it and i dont have the time to do it for him.

Asking $8500 for the whole thing it is a complete car just need the motor fixed up.

PM me for contact details, most questions i should be able to answer on here may take a few hours to reply as i work out of town and don't have reception all day.

post-29410-0-95178600-1347578940_thumb.jpgpost-29410-0-52149800-1347578952_thumb.jpgpost-29410-0-15291100-1347578962_thumb.jpgpost-29410-0-68264100-1347578973_thumb.jpgpost-29410-0-86389700-1347578984_thumb.jpgpost-29410-0-99048100-1347578999_thumb.jpgpost-29410-0-14834200-1347579132_thumb.jpgpost-29410-0-18414000-1347579194_thumb.jpg

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Watermouse
      R34 wont start after swap :(

      By Watermouse · Posted

      Saruthewhite hasn’t been on our site since November 2016 sorry mate
    • GTSBoy
      Another Crank No start thread - r34 rb20 neo + t

      By GTSBoy · Posted

      Got spark? Got injector pulse?
    • GTSBoy
      R33 GTR lift points for hoist

      By GTSBoy · Posted

      Note when Duncan says that, he means "when you're not using the correct lifting points on the sills, because you want to work on the sills. A 2 post hoist is not appropriate for everything anyway, and working on the sills is a good example of that, because the arms go under ths sills anyway. You're better off finding another way to support the car off the ground. Beyond that everything else D said is correct. Only the dedicated jacking points are the correct place to lift. Anywhere else is incorrect, extra caution and awareness must be used, etc etc.
    • Duncan
      R33 GTR lift points for hoist

      By Duncan · Posted

      Your off site links didn't work for me, and in any case it is easier for forum members if you post the pic directly either as an attachment or a link so the information is all in one place. That aside, the sills are the correct place to lift the car, whether with the factory jack or a hoist. Yes you should use rubber blocks with a slit for the seam on a hoist to avoid bending the pinch weld (where yours is currently bent, just bend it back if possible eg vicegrips), and be aware of the height you need in the blocks to clear any sill extensions to the hoist arms as it lifts If what you are doing needs access to the sills, the rear subframe bush would also be strong and secure. I'm not sure what you mean by sidemember (maybe same part I mean by sills) but be careful that your front support point is not too far back as the car is very front heavy and could overbalance.
    • AdiR34
      R34 GTT front hood lip

      By AdiR34 · Posted

      Here's my first iteration - white duct tape so color is off, but this is just a straight line across the bonnet lip. From a geometry standpoint, this is probably closest to what a GTR has. Next up is some $5 white pearl vinyl and some rubber door sill trim, applied to the BACK of the bonnet lip. It's more accurate placement to the GTR, but also follows the body lines on this setup a bit more. Couple more pics on this config incoming: Again, a $5 vinyl and rubber job, it's  POC still and not how I'm gonna run this part. But one thing I'll note is that the black trim does need to "straighten out" a bit, and instead of going completely along the line of the bonnet lip, might be better suited to wrap over the "horns" of the bonnet lip, giving it a less aggressive curve up at the ends.  The correct way to do this would be to paint it body-matched and then decide how you want to make the black line. If you used paint or a pinstripe, you could have the black line go straight to the corner of the headlight where the rubber strip typically meets the headlight on a GTR.   Hope this helps!
×
×
  • Create New...