Jump to content
SAU Community

Recommended Posts

Hi, I've got a series 2 C34 Stagea that the wife drives, when we went to clean the car couple of days ago we noticed the carpet in the front drivers side footwell was damp and the underside of the floor mats were wet. Not wanting the carpets to go moldy I've pulled out the drivers seat pulled up the carpet and noticed that there was alot of water collected in the front and rear footwell and the white foam was soaked. I've soaked up as much water with towels as I can and am currently drying the foam and carpets out with a hair dryer.

Does anyone know a possible scorce of the water? The wife usually has the air con climate control on all the time and I originally thought it could be condensation from the rear foot a/c duct but it seems like alot of water for that

Any help or similar experience stories and solutions or fixes would be greatly appreciated cause I don't way it collecting again

Link to comment
https://www.sau.com.au/forums/topic/409399-water-in-foot-well-c34/
Share on other sites

It would definitely be worth checking that the drain from the aircon condenser hasn't fallen off, or isn't kinked or blocked; this could result in all the condensate water from the aircon running down the inside of the firewall.

Water from your heater core should be green; this is the colour of the coolant you should have in the cooling system.

:wacko: I have the same problem. Pretty sure its not the heater core as the coolant level is not going down. Most of the water comes down the LH side - must find the aircond drain and maybe the drain from the sun roof but it could be something else altogether

yeah exactly, the front sunroof drain is a plastic pipe down the a pillar to the front wheel well somewhere, the rear drain down the C pillar to the rear wheel well.

mine leaks from the front sunroof drain into the passenger footwell, with all that lovely sound deadening it can stay damp for ages unless you dry it out.

but since I've never worked out where mine is blocked, I just don't park it nose downwards when it rains :)

Ok so if the sunroofs drain down the passenger side pillar why would the water be in the drivers side foot well? It seemed to of collected most near the trams tunnel near the rear a/c plastic duct thing (where the hump is, left side of the drivers side footwell)

you've got me there, no way for water to get over the transmission tunnel. maybe there are 2 drains, one on either side. mine always leaks passenger side.

also ac drain is on the passenger side.

heater core is above the trans tunnel so it could leak either side, but coolant is a very specific colour and smell, you wouldn't confuse it for water (unless you are running water in the radiator of course)

Has it been raining much in your area recently?? I had the same thing with my car a while back. It had been raining for weeks and i noticed 1 day that the carpet was damp. The water was getting in somewhere (unfortunately i didnt find it), but as soon as the rain stopped it dried out. No matter how much i ran the hose over the car, i never found where it was getting in.

I have just replaced the heater core in a C34,with one from an R33, the existing core was maked as Laurel. The core had a hole in it I think due to no green stuff in the water.

It was leaking into the drivers footwell through the ducting, with less water in the passenger footwell.

As it was the first time I have had to do this, I removed the entire dash pad, centre console, loosened the steering column and everthing to get to it, after doing it I think I would be able remove the core without taking the entire dash out.

The hassel was removing the passenger air bag to get at the fan out of the way to access the core. It is a mission even for me who takes cars to bits on a regular basis.

There three units that make up the heater setup, Ducting director, fan assembly and heater core assembly.

Took a day to get out, replace and back in.

I suppose it's possible just to get a radiator place to pressure test the heater core and see if that's the cause of the leak

Well yes you'd just be pressure testing the whole system with the heater full on and looking for the leaks! I got a heater core for my last Stagea (I'm on my third C34!) brand new from the local radiator shop - once they see it they can match it up - they are common with a number of other cars.

Checked the carpet again today and the water is back :(, I might have to try to bypass the heater core dry it out and see if it comes back again. Is there a guide to changing a heater core or do you just keep taking stuff out until you can get to it, the cars got a xanavi climate control unit, will it be any problems if I bypass the core?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have you put an aftermarket oil pressure gauge on and verified your oil pressure?   Noise being on the block, on exhaust side, how high up the block does it seem to be? It could be the VCT system getting cranky, especially if it's mainly at idle, and when warm, as that'll be your lowest point for oil pressure. Could be showing that oil passages / VCT solenoid are blocking.
    • Well, hydraulic lifters will get noisy if they are dirty/fouled in some way, and exactly how that manifests will depend on exactly what schmutz is where. There is a procedure on here somewhere for dismantling and soaking/cleaning them. Replacing them with new is about 50% of the work and about 5% of the money!
    • Thanks for the reply @GTSBoy this is is a hydraulic lifter engine. Yea right i did not realise the lifters were supposed to be compressible while installed. I could push them down but i had to lean almost my while body weight on them.  I have never heard of a lifter/ lifters ticking only at hot idle and getting worse the hotter it gets. I have owned a few jdm cars with noisy lifters. This noise is slightly more subtle, it is more of a sharp gentle metalic tic than the solid and more loud tapping I've heard on lifters. I have used a metal rod, alloy tube, hose and stethoscope and could not find the source of the tick. But it appears to be loudest on the actual engine block behind the exhaust cam gear and next to the oil filter. I had mate (40 year old mechanic) go over it with me and he couldn't find it either..  Could it be a cam seal issue of some sort?  Cheers  
    • This seems problematic and unlikely at the same time. Vanilla RB2Xs have hydraulic lifters. They do have "zero" clearance, but only when running with oil pressure inside them. When not running, you should be able to compress them and obtain heaps of clearance. RB26s and Neos have solid lifters. They should have ~0.3mm and ~0.5mm on the inlet and exhaust respectively. If they have zero clearance then bad things are happening. With nothing else being wrong, it would mean that the valves would be held slightly (ever so slightly) open when they are supposed to be closed and it should have all sorts of problems when running, caused by leakage in/out through the valves. Or, zero clearance can indicate severe valve seat recession. None of it is good. Have you used a piece of hose as a stethoscope to try to localise the noise?  
×
×
  • Create New...