Jump to content
SAU Community

Recommended Posts

Hi all,

Just wondering if people generally write the actual amount on the transfer papers when they buy their R35s. From the department of transfer website, the stamp duty for a 110k is over 7k..which is rediculous considering how much we get taxed for everything else as well. I know only it's part of the cost of buying such an expensive car but how can you reduce this cost. Do you just write a lower price on the transfer papers? if so, and the seller agrees to write it, how low should i put it on the transfer paper. Has anyone ever be caught out doing this?

Cheers

Link to comment
https://www.sau.com.au/forums/topic/409455-stamp-duty/
Share on other sites

I think the rule may be based on purchase price OR market value, whichever is higher.

http://www.rta.nsw.gov.au/registration/feesconcessions/stampduty.html

They probably have a redbook style database of values.

I wouldn't bother trying to lower the value too much beyond the approx. current market value, whatever that may be.

Link to comment
https://www.sau.com.au/forums/topic/409455-stamp-duty/#findComment-6536471
Share on other sites

Go market value, never actual sale price.

I sold a Mazda MPS a few years back for $31k, wrote down $22k and the new owner got a way with it too easy. Probably helped that QLD transport had no idea what an MPS was at the time - just another Mazda 3 lol

Link to comment
https://www.sau.com.au/forums/topic/409455-stamp-duty/#findComment-6536479
Share on other sites

I don't understand why there is stamp duty on cars after the first sale. They get a MASSIVE cut when its new, then proceed to take more off the top over the life of the vehicle - essentially double dipping the honey pot.

It's therefore in our best interest to record the lowest value possible, because there is no way it would cost $7k to do the change over paperwork on a 2nd hand GT-R.. What an effing rort..

Link to comment
https://www.sau.com.au/forums/topic/409455-stamp-duty/#findComment-6536493
Share on other sites

I wish there is some way around this, I guess I can only ask the seller for a favour when writing the price. How low do you think i can write the market value without it being questioned? also, for a 110k car we have to pay 7.1k in stamp duty in WA where as in NSW you guys pay 4.6k..why is there such a big difference

http://www.transport.wa.gov.au/licensing/1382.asp

Edited by vspecR
Link to comment
https://www.sau.com.au/forums/topic/409455-stamp-duty/#findComment-6536498
Share on other sites

Another interesting question is

If a car is sold for 150k value , written down as 90k to avoid duty's

insure the car for 160k agreed value ,

Car gets in accident written off would insurance void it ?

In short NO.

Agreed value is as it says agreed value.

However, the insurance company will try other ways to get out of paying it.

Link to comment
https://www.sau.com.au/forums/topic/409455-stamp-duty/#findComment-6536688
Share on other sites

Another interesting question is

If a car is sold for 150k value , written down as 90k to avoid duty's

insure the car for 160k agreed value ,

Car gets in accident written off would insurance void it ?

At no time will the insurance co ask for your change of ownership docs. You pay for what ever agreed value you want when you insure your toys, so write down the lowest value for the GTR as you can - $90k is very reasonable for the change of ownership forms IMO.

Edited by Wardski
Link to comment
https://www.sau.com.au/forums/topic/409455-stamp-duty/#findComment-6537241
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah it factory manual not sure about ratio but it looks like there’s been some work at the rear 
    • so I need a new speedo cable 
    • Throwing my spoon to the soup here a bit.  When I installed a 044 back in 2012, along with the direct power mod, the car became very difficult to start. To a point I burned one starter motor as I was late for work and tried to get the thing going. With some tuning and careful use of gas pedal when cranking it became bearable. Trying to make this short as possible, but the 044 died after 2-3 years, after which I went with an AEM 320lph pump, which also died after about 4 years to my dismay. After that I went with a Nismo pump, and while trying diagnose an emissions problem, I noticed for the first time that my fuel pressure was 5bar/72psi on idle, and that removing the vacuum line did nothing. After monitoring the situation, and removing the direct power feed and going back to FPCM in attempts to remedy it, I noticed there was fuel in the pressure regulator vac line. Kept the FPCM, installed AEM external regu and the car became sooo much better in every way, including starting. And I had driven it like it was for 11 years.. Anyway, I agree these are likely two different problems, and the FP problem you just haven't noticed before. I do not know much about haltecs, but what first came to mind was the CAS, which probably is not there any more. So how is the wiring from haltec to gauge cluster? How is the battery voltage and alternator?
    • Your car was auto before? You have different diff ratio (auto vs manual i think? or n/a and turbo?)
    • +1 for getting a screen off alibaba, CarPlay/Android Auto is vastly better than whatever navigation cars had 10 years ago. I got an Android screen for my 2015 BMW, huge difference. Fully compatible with factory stuff including iDrive controls.
×
×
  • Create New...