Jump to content
SAU Community

Sau Vic Show And Shine Oct 21St 2012!


Recommended Posts

Ive still got able -2.5 degrees camber I have to chuck in and get Aaron to flare rear too So much to do to actually get them ready for it anyway, hopefully time permits Haha needs to get the primer painted for it to be in any contention :P

hurry the f**k up and give me your car then so we can get it done lol

  • Replies 119
  • Created
  • Last Reply

Top Posters In This Topic

Haha its not the flaring I'm worried about, I'm on the last 3 centers to be sanded then away for paint, this is the easy part

Still have to sand/prime/paint inner barrels

awaiting front lips and center hex's to be polished

and still waiting on new bolts and nuts

then new tyres and alignment and then flare

But once the rims are together then it's all pretty easy

yeah, that's why i asked about the entrance, was a little dicey when we used this venue a few years back. And i think there's only one entrance as well... someone was going to do a recce i believe to check.

i 'just' (as in scraped) last time in my GT-T and the reason i brought it up is, from memory, it was some sort of dirt entrance, so it would have had the chance to hollow out a bit since

and back then we didn't really have anyone from the 'stanced' crowd... and if we get some of those type cars showing up, there might be some issues... that's all i'm saying.

yeh exactly right SS8

as long as its rectified before we go.. like myself and ss8 we actually have lowered gtrs with ztune front bars not gtt's with kingsprings or gtrs made for the twisties

like the saying "tyre to guard gap is like a chicks box.. the more fingers you fit the worse it is"

i would of come but im not payin 50 lol

dude, you don't have to pay $50! 50 gets you a membership IF you want one. You can go to the this event FOR FREE, but if you want to win prizes/be judged etc, you have to be a member. The $50 membership price is 1) damn cheap 2) gets you much more than just 'eligibility' rights for a SnS, allows you to get a LS2 CAMS license, discounts from club supporters, access to club only events etc etc etc

as for the entrance, if could be fine... i don't know. I just remember last time it was a little tricky to negotiate.

The type of car does not matter, in fact there are plenty lower cars than ours Anthony... and a SnS is for everyone, hence all the categories, so please be mindful of this.

EDIT:

Ok, here's a pic - i think that was one of the issues last time, the parked cars made it hard to get a decent angle, but i suppose that's out of anyones control really...

Apologies is this is not the entrance and i'm thinking of something else

como_zpsdb450f9f.jpg

Checked entry on the weekend, if you car can make it over any speed hump then your fine.

basically the entry has a lip of about 5 cm then a gentle slope to get in.

We'll work something out (e.g. wood/ramps) if we have any issues.

Surely no need to keep talking about the entrance?

Next it'll be "what happens if it rains"...

Surely no need to keep talking about the entrance?

Next it'll be "what happens if it rains"...

Usually I'm the one to ask haha. But seriously...will this park turn into a swamp if we get some rain prior to the event?

dude, you don't have to pay $50! 50 gets you a membership IF you want one. You can go to the this event FOR FREE, but if you want to win prizes/be judged etc, you have to be a member. The $50 membership price is 1) damn cheap 2) gets you much more than just 'eligibility' rights for a SnS, allows you to get a LS2 CAMS license, discounts from club supporters, access to club only events etc etc etc

as for the entrance, if could be fine... i don't know. I just remember last time it was a little tricky to negotiate.

The type of car does not matter, in fact there are plenty lower cars than ours Anthony... and a SnS is for everyone, hence all the categories, so please be mindful of this.

EDIT:

Ok, here's a pic - i think that was one of the issues last time, the parked cars made it hard to get a decent angle, but i suppose that's out of anyones control really...

Apologies is this is not the entrance and i'm thinking of something else

como_zpsdb450f9f.jpg

We have a dozen bollards. We can finally use them :yes:

I didn't realise the entrance looked like that...Pack it out with some wood and it should be alright to get into.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
    • yeah, there's a country that recently started importing Skylines, I blame them.
    • I don't have a printer, but could at least attempt to make a printable model.
×
×
  • Create New...