Jump to content
SAU Community

Recommended Posts

Follow this link to seee V35 sedan like no other. (ignore the women in pushup bras at the start, the stagea boys got a bit carried away hahah)scroll down its about 3/4 down the page.

http://www.skylinesaustralia.com/forums/topic/395458-mv35-stagline/page__st__100

I know beauty is in the eye of the beholder.. but personally, I think that is ugly.. (the car, not the girls..)

Don't want to detract from your dedication though.. i am sure there are many hours worth of work there!

And the standard sedan coupe nose is better how? Atleast i dont have to worry about my headlights going to absolute crap with discolouration of the lenses. But its your opinion your entitles to it.

The only reason i did it was because i had damage on all the front panels besides the bonnet and i didnt want the ugly front so i went withing the nissan FM platorm family to its closest relo the M35 stagea for a new nose

Edited by Howaitonaito

I would have done a coupe nose but i would have needed custom fenders but it just would have looked the same as the factory nose. I respect your opinion i was just pulling ya leg. Opinions are like a@#holes; everyones got one.

Nice work dude.

IMO it works, considering the rear of the sedans aren't quite like the coupes (a bit boxier?), fairly certain it will look better in person too

Just probably won't work with the coupes.

Who knows, you might actually start a new trend?

No different from people with Onevia's / Sileightys etc.

Or even the R34 front conversions for the Stags.

:thumbsup:

I think I like it... need moar pics pls! Looks like the lights were a bitch to align, or is that a test fit?

I actually like the sedan lines and haven't seen this particular front swap done before, so nice one.

Edited by Dreadnought
  On 20/09/2012 at 9:10 AM, Seano350GT said:

I like it because it's unique, well done. I do personally think those stagea's are ugly though.

Don't worry, not many of us like v35s... :P

  On 20/09/2012 at 9:17 AM, PN-Mad said:

Don't worry, not many of us like v35s... :P

Dont see to many M35 with disgusting yellow, UV damaged headlights? Do you compared to V35s?

  On 20/09/2012 at 9:10 AM, Seano350GT said:

I like it because it's unique, well done. I do personally think those stagea's are ugly though.

May be ugly but the rozzers ignore us. Anyone feeling irresponsible can peel off a 12-13 sec qtr in front of them & they'll turn around & book one of you P platers for dark tint, lol. Plus we can fit half of your car in the back.

  On 20/09/2012 at 9:17 AM, PN-Mad said:

Don't worry, not many of us like v35s... :P

^^^ haha

Mark, I think you've done a fine job on the Stagline. It's unique & you did it your way :thumbsup:.

All that's left is to convert the back two thirds....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • With ordering the belt, you're doing water pump and the idler and tensioner at the same time too yes?
    • This is just a dumb way of keeping the wastegate closed to make more boost. Undo it and either follow the factory setup or redo it properly. Manual boost controllers just use a spring preload to determine when to close in response to boost pressure so it no longer vents to atmosphere.
    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
×
×
  • Create New...