Jump to content
SAU Community

Recommended Posts

Hello any help would be great,

My C34 is currently leaking oil from near the oil filter, I'm 99% sure its not the oil filter because when i grab it with clean hands the filter and the filter block are clean. It looks like its coming from the part in the pics iv attached it might be the factory oil cooler? not to sure just wondering if anyone knows of a common leak that can develop in this area? I cant get a good look in there and I have big hands LOL, also its leaking a fair bit of oil so I need it fixed asap.

thanks guys

Rhet

post-56886-0-99762900-1348377090_thumb.jpg

post-56886-0-96705600-1348377121_thumb.jpg

post-56886-0-98867300-1348377156_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/409953-rb25-oil-leak/
Share on other sites

That's an iunisual place for an oli leak, the cooler is a bolt on arrangement and unles you have removed it there sholud be no problem, how much oil are you loosing it might be coming from above, cam covers are prone to coming loose, try tightening the covers maybe.

Link to comment
https://www.sau.com.au/forums/topic/409953-rb25-oil-leak/#findComment-6546557
Share on other sites

I have a remote oil filter in which I have oil temp and oil pressure sensors for dash mounted gauges. I run single din and gauges fill space.it is cool and practical.No leaks.

Link to comment
https://www.sau.com.au/forums/topic/409953-rb25-oil-leak/#findComment-6546593
Share on other sites

It is loosing a bit, a little 10cm puddle when I park over night. It has never been removed as far as I know. I did look to see if it was coming from higher and didn't see anything but I'll have a proper look tomorrow again.

Link to comment
https://www.sau.com.au/forums/topic/409953-rb25-oil-leak/#findComment-6546840
Share on other sites

  • 1 month later...

Hello again fine sirs! after repairing the first oil leak i have found another, oil is seeping from the very front of the sensor to the left/below the oil filter. Right from the front just behind the screw that holds the tab/electrode thing for the sensor wiring. Now is this the oil pressure sensor? i'm thinking it may be best to replace the whole thing? any advice?

cheers guys, this is really starting to shit me!

post-56886-0-04450000-1352018130_thumb.jpg

Edited by horrace
Link to comment
https://www.sau.com.au/forums/topic/409953-rb25-oil-leak/#findComment-6608819
Share on other sites

Agreed with Dale. Hey Rhet, does your oil light on your dash work? I was wondering from viewing the first pic why it was disconnected. That brown plug flappin' in the wind in the pics should most likely be connected to it..........

Link to comment
https://www.sau.com.au/forums/topic/409953-rb25-oil-leak/#findComment-6609172
Share on other sites

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The cam I am actually putting in (a few posts up) is actually smaller than my current one. At least duration/overlap wise. All the chop stuff I hear just sounds like an engine running badly, because it is. I then envision driving it around in 1st gear and being massively sad about it bucking to the beat of said chop. There is an idle video of someone with a similar cam floating around the internet, but mine is a custom cam (so is his) so it'll never be the same, plus the fact exhausts are entirely different. What I want to do is put some bullet mufflers/race mufflers in to replace a couple sections straight pipes that currently replace the two extra cats that I don't need. But this is even further down the line!
    • I can tell you now, when the bracket that the little hydraulic ram attaches to snaps, with a subframe, and V8 from an AMG C63 on it, it sounds like someone letting shotgun off right beside you. It leaves your ears ringing, and a huge thankfulness that you never ever put a body part under something heavy that's only supported by a hydraulic lift...
    • Still not a guarantee fix. I used a high quality butyl-mastiq (the black goo that's not really silicone nor polyurethane, same stuff they use from the factory that just spreads out like melty cheese), and I still get lots of water on both sides of the trunk when raining or washing the car. I also suspect the factory spoiler rubber gasket might not be sealing well, so I'm thinking of adding a thin layer of grey silicone around the bolt holes on both sides and see if that's where it also leaks from. The biggest issue is that these cars don't come with a drain hole on each side like other coupes and hatchbacks.
    • I hate it, but maybe he could paint it Monster jam style and call it...godzilla?
    • Would seem to me to be appropriate to go GTR style bar. There are options with and without N1 vent holes, with the GTR lower lip integral (because FG copy). https://justjap.com/search?q=r32 bumper  
×
×
  • Create New...