Jump to content
SAU Community

Recommended Posts

So i'm sitting here wondering if there is a way for me to seperate the dump mouth of a standard 33gtst turbo to make a seperate gate and dump flow.

I have a split dump pipe and i want to know if i can divide the 2 outlets on the back of my turbo into 2 seperate sections, meaning that when my gate opens it goes straight out but when im just cruising it flows along through the full system.

Let me know if anyone has done this before. Im interested in seeing if/how i can do it.

Cheers

Ben

Link to comment
https://www.sau.com.au/forums/topic/410038-internal-gate-screamer/
Share on other sites

Most internal gate screamers leak a bit. A piece of metal needs to be added to the turbo side of the exhaust flange to block flow between the waste gate and turbine outlet at the back of the turbo. The trouble with this as far as I am aware is that due to heat expansion, a perfect fit can be problematic. Also, when they are mass produced, differences in casting make it difficult to have a decent seal as one turbo may be 0.5mm smaller than another meaning to seal up on the larger, the smaller would not fit.

Other than that, cut the waste gate pipe off the dump and seal up the hole. The waste gate pipe can then be cut further and routed off to where ever you want it.

Make sense?

  • Like 1
  On 25/09/2012 at 12:07 PM, brenton21 said:

Like a dual port blow off valve type setup? A vent to atmosphere and a plumb back waste gate?

Nope, a screamer is just a pipe that goes atmo from the wastegate... Internals generally don't sound that nice, have issues with leaking (as mentioned) and due to smallish standard turbos would be open a LOT..... I have mates with them but would never do it to my own car.... There is a few different designs around and yes you can do it....

  • 2 months later...
  • 3 months later...

So the stepbrother bought a 32gtst. basically stock with a fmic and 3 inch dump back system. Internal gate screamer fitted and it sounds brilliant. Well worth the cash in my opnion. Although when you see a stock xr6 out accelerate a skyline when the skyline sounds like its got 250rwkw its pretty funny. Not a bad investment guys. If you want that epic gate noise from your car.

  On 04/03/2013 at 3:20 AM, marto184 said:

So the stepbrother bought a 32gtst. basically stock with a fmic and 3 inch dump back system. Internal gate screamer fitted and it sounds brilliant. Well worth the cash in my opnion. Although when you see a stock xr6 out accelerate a skyline when the skyline sounds like its got 250rwkw its pretty funny. Not a bad investment guys. If you want that epic gate noise from your car.

They sounds average at best, Once you hear a proper external you will know the difference :P

Looked at one of these for my 32 race car where defect is not a problem. But yes even my race car with only around 200kw would look funny getting smashed by a quieter 33 or something on the track lol.

  On 04/03/2013 at 3:24 AM, 34GeeTeeTee said:

They sounds average at best, Once you hear a proper external you will know the difference :P

This haha.

Internal gate screamers sound like an exhaust leak.

  On 04/03/2013 at 9:02 AM, Hanaldo said:

This haha.

Internal gate screamers sound like ARE an exhaust leak.

FYP

Although all screamers are, it just sounds more degrading that way :P

  On 04/03/2013 at 9:14 PM, marto184 said:

Alot of people who can't afford the whole external gate setup would like it though. ill see if i can get a vid of it so yous can hear it.

Link Vid!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...