Jump to content
SAU Community

Normal Temps For R33 Gts-T

White_33

By White_33,
in Engines & Forced Induction

 Share

Recommended Posts

White_33 Enthusiast

White_33

Posted
Posted

As per topic, just inquring on the normal operating temperature for an R33. I have owned the car for about 3 months so not sure what is normal. It has a Blitz water gauge that reads in the mid to high 80's from driving normally.

Does this sound correct? At what temp would I need to be concerned. BTW it has a larger radiator.

Cheers,

Link to comment
https://www.sau.com.au/forums/topic/410293-normal-temps-for-r33-gts-t/
Share on other sites
jjman Mentor

jjman

Posted
Posted (edited)

I also wanted to query this...

I have an aftermarket temp sensor in the top hose (which is i gather just after where the OEM sensor sits?- in the housing just before the top hose)

anyway, this thing reads 86 degrees stable as the point where the thermostat has opened and obviosuly circulating coolant- i.e. it is the lowest operating temp indicated with the motor at operating temp.

But if i plug into the ecu it is displaying 72 degrees.

any body know what the gig is here?

Edited by jjman
The Dan Grand Master

The Dan

Posted
Posted

I also wanted to query this...

I have an aftermarket temp sensor in the top hose (which is i gather just after where the OEM sensor sits?- in the housing just before the top hose)

anyway, this thing reads 86 degrees stable as the point where the thermostat has opened and obviosuly circulating coolant- i.e. it is the lowest operating temp indicated with the motor at operating temp.

But if i plug into the ecu it is displaying 72 degrees.

any body know what the gig is here?

Your coolant temp sensor could be slightly out. New ones are about $30 from Repco but you need to match up the part by picture or go to tridon's website and find it there. I forget the number now

The Dan Grand Master

The Dan

Posted
Posted

are you referring to a replacement for the aftermarket one i have or the OEM one?

OEM

My gauge shows 10 degrees above what the laptop says, so Dan a new sensor will fix it? Or could the gauge be out?

Well, the gauge could be out but your CTS is 15-20 years old if it hasn't been replaced. 10 deg isn't much. Noel's black 33 had a similar issue where he thought it was getting super hot but I replaced the CTS and it all came back to normal readings

gotRICE? Veteran

gotRICE?

Posted
Posted

mine ran over 85 a while back and i could hear it pinging so i dont think over 85 is too good

If thats the case i dont think the temperature is your problem.

The stock thermostat isnt fully open till 85 odd degrees anyway.

Mine sits around 85-88.

Even into the 90's isnt a problem.

AngryRB Grand Master

AngryRB

Posted
Posted (edited)

If thats the case i dont think the temperature is your problem.

The stock thermostat isnt fully open till 85 odd degrees anyway.

Mine sits around 85-88.

Even into the 90's isnt a problem.

the pinging was related to putting on a quiet restrictive muffler, and that seemed to increase the coolant temp's as high as 89deg,

these days it wont go higher than low 80's.

have you noticed the car loosing any performance when its running at 90deg?

Edited by SliverS2
gotRICE? Veteran

gotRICE?

Posted
Posted (edited)

the pinging was related to putting on a quiet restrictive muffler, and that seemed to increase the coolant temp's as high as 89deg,

these days it wont go higher than low 80's.

have you noticed the car loosing any performance when its running at 90deg?

So then id say that the restrictive muffler had everything to do with the pinging if your car was tuned to a more free flowing item possibly. Not coolant temps?

No performance loss whatsoever running into the 90's. I only had my tune dialled back when it went over 99 degrees. Boost limited to 1bar. I pushed it up to a peak of 107. heh. Was getting frustrated with only getting in 2 hot laps before it was cutting. Then found out that i only had a single core non turbo radiator dealing with 290rwkw :) Cant say i looked at it that closely till then lol!

Edited by gotRICE?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • kevboost7
      Magnetic Drain Plug Snapped in Half

      By kevboost7 · Posted

      Update: I got the magnet out. I bought 3 different flexible magnetic reach tools, but none of them worked. The magnet on the tip was all less than 2lbs of force, so i had to buy a special cylindrical magnet that had a pull force of 9lbs.  The magnet finally came in the mail yesterday, so i got under the car to get to work. The super strong magnet isn't that long, so i only have about 1 finger pinch lengths to hold it. I was so scared when i was going in the hole, that the 9lb magnet would just fly away inside the oil pan never to be seen again, but i had my butt cheeks clenched and finger gripped on that thing so tight, i managed to get it to suck the other magnet out.  It was a victory for me last night.         
    • MBS206
      New fix for low tyre pressure from bmw

      By MBS206 · Posted

      Yep, pretty much what you said is a good summary. The aftermarket thing just attached to the rim, then has two lines out to valve stems, one to inner wheel, one to outer wheel. Some of the systems even start to air up as you head towards highway speed. IE, you're in the logging tracks, then as speeds increase it knows you're on tarmac and airs up so the driver doesn't even have to remember. I bet the ones that need driver intervention to air up end up seeing a lot more tyre wear from "forest pressures" in use on the highway!
    • sunsetR33
      Anyone know this frontpipe?

      By sunsetR33 · Posted

      Yes, but you need to do these type certifications for tuning parts. That is the absurd part here. Meaning tuning parts are very costly (generally speaking) as well as the technical test documentation for say a turbo swap with more power. It just makes modifying everything crazy expensive and complicated. That bracket has been lost in translation many years ago I assume, it was not there.
    • dbm7
      New fix for low tyre pressure from bmw

      By dbm7 · Posted

      Hahaha, yeah.... not what you'd call a tamper-proof design.... but yes, with the truck setup, the lines are always connected, but typically they sit just inside the plane of the rear metal mudguards, so if you clear the guards you clear the lines as well. Not rogue 4WD tracks with tree branches and bushes everywhere, ready to hook-up an air hose. You can do it externally like a mod, but dedicated setups air-pressurize the undriven hubs, and on driven axles you can do the same thing, or pressurize the axles (lots of designs out there for this idea)... https://www.trtaustralia.com.au/traction-air-cti-system/  for example.... ..the trouble I've got here... wrt the bimmer ad... is the last bit...they don't want to show it spinning, do they.... give all the illusion that things are moving...but no...and what the hell tyre profile is that?...25??? ...far kernel, rims would be dead inside 10klms on most roads around here.... 😃
    • joshuaho96
      Anyone know this frontpipe?

      By joshuaho96 · Posted

      You're just describing how type certification works. Personally I would be shocked to discover that catalytic converter is not in the stock mounting position. Is there a bracket on the transfer case holding the catalytic converter and front pipe together? If so, it should be in stock position. 
×
×
  • Create New...