Jump to content
SAU Community

Recommended Posts

Hey.

I posted a thread not long ago about buying a new clutch. But I just thought I would try and cover all my bases before I go purchase it.

My problem began the other night after I picked my car up from the tuners. We were out giving the skyline a bit of a hard time out the road testing out its new abilities when the clutch started taking up later and later on the release of the pedal after smelling a strange burning sensation. (Hear me out) Here's the thing, the clutch was a heavy duty organic, only 10,000 kms old, never slippd horribly.. Replaced when the motor was rebuilt. Car is currently making 220rwkw. We just changed the gearbox fluid to new lightweight shockproof and seeing how it was driving. It didn't smell like clutch, the burning smell. It more more like the smell of the gearbox oil.

Now the car still drives but the friction point is way up where it shouldn't be and it now slips on anymore than 1/3rd throttle.

I didn't think 220rwkw would be enough to damage a HD clutch (unknown brand). Could of transmission oil somehow contaminate the clutch plate?

Link to comment
https://www.sau.com.au/forums/topic/410900-clutchdrivetrain-issues/
Share on other sites

Sounds like it. I have the (unknown) but HD single plate that came with the 33GTR gearbox that went into my Stagea - it wasn't new then and its done another 10,000km since and it doesn't slip with my RB30 and about 280awkw.

there are too many factors to determine why a clutch only lasts xx km.

As in what brand was it? Did you bed it in properly ie drive easy for the first 1,000km?

Do you slip it when you drive?

Do you ride it a lot of the time?

All these things are contributing factors to the longevity of a clutch.

To end my post

Get a NPC and never look back.

Mr NPC out

Unsure of brand, didn't say on engine rebuild receipt. Drove it easy for a little while, yes, doesn't get slipped much, just normal city driving. Doesn't get ridden. Only driven hard occasionally .

Fair enough, thanks anyway fellas

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @soviet_merlin Thanks mate!  Nothing too major but will hold me up for a while. I've got lymphomas to get taken off the back of my neck and the middle of my spine which always conjures scary thoughts!  It sounds worse than it is. Yeah great, conjuring more rabbit hole deepening , just what I need! 🤣  
    • I'd argue the F50 kit I got is very good value. For ~2k I got the calipers (refurbed condition), adapters, pads, brake lines, rotors, and top hats. I think you'd be pretty hard to get Evo/GTR/350z brembos + the additional hardware for similar money. Used market for a pair of front calipers alone I've seen tend to run anywhere from $1500-2000 depending on condition.    That said, something like a GTR or 350z brembo is a lot easier to adapt to the Silvia. 
    • Is there a significant price difference between the Evo/gtr/350z brembos vs the F50? Looks amazing.
    • I was actually being a tightarse at the time LOL... My OCD is tickling me into running a 2nd 8AN Teflon hose all the way down and removing the 2x OEM hardlines. My other side of my brain is telling me to run 2x hardlines front to back (also acts as a fuel cooler, so win win).
    • As I mentioned in an earlier post, I had some trouble with the Silvia's brakes dragging back in 2023. I managed to sort it out then, but the same problem came back to bite me late last year. Just take a look at the picture – I had a feeling the handbrake was acting up again, and I was right. Anyway, I'd been wanting to upgrade to bigger brakes for a while. Not that the Silvia's brakes were bad, but it was more of a "want" than a "need", you know? It was funny, though – at the time, I couldn't find any Evo Brembos, 350Z Brembos, or GTR Brembos for a decent price (of course, tons of them popped up online after I already bought my kit!). I ended up going with an F50 Brembo kit, which came with adapters, brake lines, 330mm rotors, and top hats. The F50 Brembo caliper was used in a few other cars too, like the FPV. I also decided this was the perfect opportunity to ditch the Silvia's ridiculous rear brakes and that awful handbrake (some of you were definitely right about that!). I picked up some R33 calipers and all the necessary bits – rear drums, backing plates, and new hardware to refurbish the calipers. Of course, it wouldn't be a project without a few hiccups. Turns out the brake master cylinder was playing up and basically (to put it simply) keeping the brakes engaged. I had it overhauled, and after some adjustments, everything was working again. The whole process took a while, as you can imagine. To top it off, the front right wheel bearings were shot and needed replacing too. This is a rare occasion where I'm posting an update while it's all still fresh! These pictures were taken just this afternoon.
×
×
  • Create New...