Jump to content
SAU Community

Recommended Posts

I was looking at buying a set of tomei rods for my 26 build and came across a couple of threads and sites that suggest that Tomei are making some of their parts from China. Does anyone know if this is true?

I don't want to blow $1200 on rods when they're of poor Chinese quality.

Here is a couple of links that I found:

http://www.gtr.co.uk/forum/74699-my-new-h-beam-junk-eagle-rods.html

http://forums.evolutionm.net/evo-general/594101-tomei-parts-made-china.html

In reference to the above link, rhd Japan saying in the link below that they are not stocking tomei parts anymore and they prefer hks:

http://www.rhdjapan.com/tomei-h-beam-conrods-set-rb25det-rb26dett-vq35de-1jz-gte-2jz-gte-26416

Link to comment
https://www.sau.com.au/forums/topic/411094-is-tomei-parts-made-in-china/
Share on other sites

I read the whole threads and nowhere does it say that quality is lacking. The only thing it says, and that we all know, is that you pay for the name. Plain and simple

Hi

I havent been here for a while, thats why there is no update.

My car made 530hp 695nm torque at the hubs with these rods and CP pistons.

Still stock head, stock cams, stock ic, stock inntake, stock fuelrail / fuel lines.

And trust me, i have been trashing my car at dragracing / trackdays since last year. Been on long trips, use the car as much as i can and it still runs like a clock. Even with grinded crank (experts on here say they cant be grinded... doh!)

I just put in new engine managment, going in for a re-map later this month i hope.

Thanks

Asim

Hi

Sorry, but i dont remember weights since it is so long ago.

What i remember is visiting all of the well known engine builders here in Norway and every one told me these rods are as good as any other.

And i think Jens Hannestad (the guy who build the engine for the WRC Escort) and people like him now what they are talking about.

I also ordered these same rods for several other RB26 engines, and all of them run healthy as a horse, one of them made 980hp at the crank. (the last couple of sets i ordered was with L19 ARP bolts)

So.... go figure.... smile.gif

Asim

I was looking at buying a set of tomei rods for my 26 build and came across a couple of threads and sites that suggest that Tomei are making some of their parts from China. Does anyone know if this is true?

If you think the majority of the Jap (or US) parts are actually made somewhere other than China/Thailand (ie. Japan/UK/USA), you'll be in for a bit of a shock if you do more digging more of your own research on a bulk basis. It's simple business - do what the competition are, or go bust.

I know for a fact some of the HKS cranks come outta China, and have for quite a while. Just the tip of the iceberg really.

A lot of high profile Aussie brands have stuff ex-China/Thailand as well, and they perform exceptionally.

There is nothing wrong with stuff out of China from a lot of the manufacturers, this isn't 2006 - it's 2012 and times have changed and improved markedly

Hit the nail on the head, it'll only get better as well.

A lot of the contracts are pretty closely guarded for obvious reasons, and the factories do understand that saying something will mean work is taken elsewhere - but some of them will sell items "on the side" if you know where to look, all of it without labels/branding and they strangely are identical to items that would come in a labelled/branded box if you get them shipped and compare :)

Lets just say Tomei HAD their tooling done in japan and now its done it China (assumption for those who are worried).

Theres a machine shop that makes the part, and there are engineers who run the shop and make/QA the parts.

What farking difference does it make what country its done in? Same tooling, same product, same quality, SAME thing.

Think about this, an engineer in Aus gets paid upward of 100k.. An engineer in China would get paid less than half that, but would probably be richer than the Aussie. Thats called economics.

Less on tax, less on shipping, less on wages, less on rent, less getting things through customs. Less less less but same product.

Let it go.

  • Like 1

lol not yet... Think if China wasn't bubbling along so well in recent times, we'd be in quite a bit of Financial strife as a country.

Some of that would certainly be car part manufacture, how much, can of worms :D

lol not yet... Think if China wasn't bubbling along so well in recent times, we'd be in quite a bit of Financial strife as a country.

Some of that would certainly be car part manufacture, how much, can of worms :D

Its not about war anymore , but i think they are slowly owning us over time even are car manufacturing is dying a slow death

Lets just say Tomei HAD their tooling done in japan and now its done it China (assumption for those who are worried).

Theres a machine shop that makes the part, and there are engineers who run the shop and make/QA the parts.

What farking difference does it make what country its done in? Same tooling, same product, same quality, SAME thing.

Nothing wrong with things made in China provided you have your own QA through the life cycle or as many do you don't actually simply let a contract manufacturer but invest in the tooling/plant which is operated under licence in China. In my eyes there is no problem with big players getting things done in China ... but there is a reason why loads of industries do their own QA on raw materials, plus loads of other practices to ensure made in China doesnt ruin their brand.

Now a chinese company going it alone with a product made in China too often = rubbish. My experience is not car parts but engineering industry experiece

The main historical problem with manufacture in China and the resultant quality was what happened when people decided that they were goint to get their stuff made over there, went for a visit, got a tour of Factory "A" with some guy who showed them all the modern equipment and swore black and blue that the gear would get manufactured there, then came home to Australia and were happy with the first 3 shipments of gear. Problem being that in the 3 weeks after their visit to Factory "A", that same facility got shown to 3 other wannabe outsourcers, and each time the manufacture got shuffled down to Factory "B", then "C", and the quality took a gradual swandive until the market or Australian QA/QC people chucked the shits and the whole lot came to a grinding halt.

Those that committed to actually setting up shop themselves and supervised what was being done at every stage always had good product come out of China. But in the early days they were in the minority. The biggest problem that these people had was the backdoor selling of their gear at knockdown pricing and the rampant theft of IP.

China is where all manufacturing of goods is heading. Look here in Australia and you see it all the time. Australia is pricing its self out because of our ridiculous cost of things and big businesses is forcing it to happen by trying to be competitive

You cant compete when your opposition starts getting there products made in china coz china does not trade its currency and undervalue it and has done that deliberately to keep workers and manufacturing costs low.

  • 1 year later...

I have met Aki Sasaki, President of Tomei and have had the pleasure of dinner with him in 2012.

Tomei take their manufacturing very seriously and are all about quality control, regardless of the country they are made in. It is not as competitive to make everything in Japan like they used to.

With approx $200 million of stock in the USA, they need to ensure that things are made and sold at competitive margin.

The chinese are brilliant manufactures, but are 100% clueless as to what they make and why it has to be a certain way. I have visited factories and facilities you get good and bad facilities depending on the operators.

The good facilities have engineers as owners. The bad ones have people looking to copy and make a quick buck. The only way you can tell is if you go to the factory and have a good look around at their manufacturing.

Wages for good manufacturing employees are around $100-$150 USD per week, 40hr work week, paid overtime etc and includes boarding / meals etc.

Graduates that work at HSBC or similar in accounting / auditing roles - approx 700-800 usd per month, paid monthly as a salary and lots of overtime when required.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update: Tunehouse looked into the problem and identified a wiring issue between the camera unit and the connector. They managed to get it working , but did warn me at some point it will stop working again. From their perspective it is unserviceable and will need replacement. They did some research and found that the new replacement camera would be Approx $1400 supply only (their fitting cost would be $190) . They did provide the part number (28442-JL05B) and a quick google of the part number shows that these are rather expensive brand new (seemingly no longer in manufacture) for the places that still have them in stock, with the used option potentially presenting  the same issue down the track at some unknown point. They are happy for me to supply the part so that they can fit it. Decisions, decisions... I can definitely recommend Tunehouse (thankyou Vee37!). Cost for the diagnosis was as quoted  ($190) , car was ready on time and communication was top notch. Their workshop is super clean and modern, and there was plenty of car candy parked out the front on the day I went.   Would definitely go back.   
    • to fix the voltage drop issue I swapped out the old 150amp alternator which turns out is a brand known for having issues and replaced it with the black 180amp alternator beside it 
    • For anyone interested, the Way Back Machine has that Japanese website archived with pictures, etc: https://web.archive.org/web/20051023225805fw_/http://www.a31cefiro.com/air_con.htm "Simply swapping the wiring of the harness will not allow it to function properly. For the outdoor air sensor and sunlight sensor, disconnect the wiring connected to CN1-11 of the air conditioning harness from the harness and connect the sensor side wiring to earth. For the indoor air sensor, disconnect the wiring connected to CN2-3 of the air conditioning harness from the harness and connect the sensor side wiring to earth. The connector PIN numbers listed here are the genuine A31 PIN numbers. To avoid incorrect wiring, check with a tester before wiring. Also, disconnect the wiring in a location close to the sensor. The disconnected harness side wiring will not be used, so be sure to insulate it." Wish someone sold a conversion harness to just plug-and-play a Kouki 180sx digital climate control into C33/A31. I'm decent with wiring but feeling kinda lazy about taking this on. Edit: Did some more digging and found a helpful Minkara blog post about the conversion as well: https://minkara.carview.co.jp/userid/1831116/car/1360568/2284209/note.aspx "After installation is complete or the battery is replaced, you need to go into self-diagnosis mode and set the internal air recirculation. The way to do it is to "hold OFF with the key on for more than 5 seconds, set the number to 5, then press 卍→C." ↑↑↑It probably won't make sense unless you actually try it (・∀・)." Lol wtf
    • Maybe SAUNSW could see howany members would do a motorkhana day if Schofield's is still available for a reasonable price...
    • Skip the concrete, we just need to smooth a field. Mark knows how to drive a grader Duncan   I reckon 100x100 flat area for skid pan style, and then some sort tracks for rally... Duncan's already got a rally car on the premises to...
×
×
  • Create New...