Jump to content
SAU Community

Recommended Posts

Hi All,

Still wanting to get rid of my clutch and spare plenum, possibly the brakes as well.

Located in Narangba, Bris.

best contact is 0421 933 614.

Greddy plenum - $700

This has about 5000km worth of use through it, runs the 6 throttle bodies still. - does not include throttle body assembly.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

AP racing 6 pot calipers, 354mm 2 pieces rotors, custom braided lines and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

If you want pictures let me know and I can email or mms them.

Plenum sold.

NPC twin plate clutch - $1200

This was in my old r32 GTR. held approx 500hp with no drama's. Was told it should hold up to around 1000hp.

Solid centre, but still fine to drive on the street. I drove it a few times in brissie peak hour with no hassle.

AP racing 6 pot calipers, 354mm 2 pieces rotors, custom braided lines and fitting hardware - $4300

These have about 5000km of use on them, mainly just daily street driving, have seen about 5 laps of QR and performed wonderfully.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys, Sorry to butt in and take it slightly off course, although still on the VCAM subject.  I had VCAM put into my Tomei 2.8 bottom end and I struggle to take off because the engine has very little torque caused by VERY low dynamic compression at 60psi. But once off the mark and especially on boost, the engine rev happily all the way to 8000rpm and makes 630hp at 20psi of boost on E85 at the rear hubs. Has anyone had any similar experience or any suggestions on what might cause this low compression at low rpm? I am in the process of converting it into a 8hp transmission and with this low torque, the engine would not even stay running until the throttle is opened to more than 30% and then I loose all vacuum. 
    • Last year I got a set of MCA street coilovers for my turbo Forester after my son hitting a concrete gutter/wall on a small bridge causing the whole drivers side suspension to get bent because the rain just made the car slide out I love them, I think they were $2400. even had a hiccup of have the wrong hub configuration (my fault) so got onto MCA and they sent the correct shock ends overnight parts from QLD, for free!  I was very impressed with their customer service and quality of the product  
    • They've had some weird failures on their brake actuators. One of them was because they added some kind of lubricant to the factory fill brake fluid that aftermarket brake fluid didn't have so it would affect the seals. Another was just mysterious, probably internal corrosion or something eating away at Prius brake actuators. Parts alone for those are a few thousand USD so not a cheap fix.
    • Selling a genuine Nissan Skyline R33 Coupe 8-Pin Power Window Master Switch Part No. 25401-26U10 Price $300   IMPUL Gear Knob – Rare JDM Upgrade Upgrade your interior with this genuine IMPUL gear knob – a rare and stylish addition to any JDM build. Premium quality, perfect fit, and an authentic Japanese touch for your ride.  Price:$300 Nissan Skyline R33 (Series 2) Sedan Tail Lights Immaculate Condition OEM JDM S2 a pair of OEM Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state. Price:$900   Located in Melbourne (Western Suburbs) – Shipping available Australia wide at buyer’s expense. DM if you need anymore details.  
×
×
  • Create New...