Jump to content
SAU Community

ALWAYS watch where you park!

ix9

By ix9,
in Western Australia

 Share

Recommended Posts

ix9 Grand Master

ix9

Posted
Posted

Well after a RICE cruise last night where I had a nasty vibration in the rear end...almost sounded like a diff-clunk, driveline chatter..... well. I found out what it was!

Upon closer inspection of the rear-end, ie looking at diff's tailshafts etc... I jacked the car up to have a look underneath. Only to find my rear-left side wheel nuts were all LOOSE! (YES! Including the lock nut!) I was like WTF? So I tightened them up trev-strength-stylez, and thought I'd go take a look at the other side.. OMG TWO MISSING! Some theiving ARAB tried to steal my white enkei's!

My car was parked at City West undercover all day on friday, which it hardly ever is.. So I reckon it's some chumps around there. They must have been distracted/scared away as they only done half a job on either side. Who knows.. if it had gone the other way, my rims woulda been gone!

So just a warning to all you guys that have shit-hot rims, lock nuts mean F*** ALL, and be sure to check your rims if you've parked your car in a dodgy area!

Link to comment
https://www.sau.com.au/forums/topic/41111-always-watch-where-you-park/
Share on other sites
uneekwahn Grand Master

uneekwahn

Posted
Posted

kym, are they the "standard" lock nuts you can get from just about anywhere?

Nismo sell a special lock nut that comes with a special tool and I doubt many people here would have them. Thing is, any mechanic would have the correct tool to undo them ..

ferni Grand Master

ferni

Posted
Posted

Good to hear you didn't loose your rims, thats what counts...

but yeah anyone can just hammer on a socket that is a tiny bit to small and use that to get the locknut off, or use a chisel etc...

only so much you can do... best is to park somewhere with high visibilty to people walking past, lots of lights etc... or dont park at all

ix9 Grand Master

ix9

Posted
  • Author
Posted

Yeah.. I ain't leaving my car in any car park now!

*sigh* Yep. I had jap-spec lock nuts when I first got the car, and they were dam hard to get off.. I know this cos I lost the lock nut and failed to find a match for them. I had to replace them with the common-get-from-anywhere nuts!

$140+ for new nuts?! WTF! Might have to go sell my ass on the street corner for those mofo's! But hey, it'll be worth it!

The vibration is caused was pretty bad too, I just hope it hasn't done anymore damage (ie wheel bearings, shafts etc) I guess I'm lucky the wheel didn't come off and slice off the studs and rip out the rear-quart's!

lukits01 Experienced

lukits01

Posted
Posted

wow close call

I had a neighbour with a HSV that wasnt so lucky (and these things come with 18s?)

and we live on mounts bay rd apartments! the car was parked in front of the lobby!

I came back after a night out at 2AM and saw his commodore on 4 bricks

which was kind of a funny sight hahah

the next morning he called the police and questioned a few of the tenants

apparently it was done around midnight.

oh the funny thing I almost forgot to mention,

apparently after midnight one of the tenants came out and saw the car, but 2 of the rims were gone but the other 2 was still there. So he must have scared the thieves off, but he didnt report it to anyone so these guys came back later and finished the job with the last 2

I must say these guys are pretty daring or stupid

pstanbis Enthusiast

pstanbis

Posted
Posted
bad luck kym ;)  

get ROH's ..... common as shit ..... couldnt pay the barsteds to steal them off me LOL

As Stupid as that may sound to some.... :) I couldn't agree with you more !! there are definitely certain advantages to being just like everyone else....

fane Mentor

fane

Posted
Posted

yeah i nearly had them off and some bastard came walking around the corner... :(

;) good to hear that you got outa that one alright kymbo....as for me i was driving down the road and about 20 blokes were standing on the side of the road....

the group slowly molded onto the road as i got closer to them (doing about 50kph) and then one ran out onto the road with something in his hand (i think it was a bottle) and try it hit my car.... he succeeded in his task hitting my mirror, braking all the mechanics inside :D and smashing the mirror :)

we hunted around all night for the group with 3 car loads of people and we found them eventually, it was fun :P

i think its time for a roo bar... :cuss:

sexzila Veteran

sexzila

Posted
Posted
Well after a RICE cruise last night where I had a nasty vibration in the rear end...almost sounded like a diff-clunk, driveline chatter..... well. I found out what it was!

Upon closer inspection of the rear-end, ie looking at diff's tailshafts etc... I jacked the car up to have a look underneath. Only to find my rear-left side wheel nuts were all LOOSE! (YES! Including the lock nut!) I was like WTF? So I tightened them up trev-strength-stylez, and thought I'd go take a look at the other side.. OMG TWO MISSING! Some theiving ARAB tried to steal my white enkei's!

My car was parked at City West undercover all day on friday, which it hardly ever is.. So I reckon it's some chumps around there. They must have been distracted/scared away as they only done half a job on either side. Who knows.. if it had gone the other way, my rims woulda been gone!

So just a warning to all you guys that have shit-hot rims, lock nuts mean F*** ALL, and be sure to check your rims if you've parked your car in a dodgy area!

Sounds like my story last year at Morley.....

Shame on you ARAB!!!

ix9 Grand Master

ix9

Posted
  • Author
Posted

MarkR33,

Yeah, they have security footage of that carpark.. but the D*ckheads at city west are intent on charging $70+ to VIEW the tape. Even then it's not good quality, and the most I can do is get their rego/face and hunt them down nazi-style... :( *sigh*

Michael,

ahah! LOL! If it were Fane trying I'm sure i'd find man-jizz at the scene of the crime.. it'd be a dead giveaway! :)

Fane,

OMG! That's goatass! Gav'll be able to hook you up with some new mirror!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Watermouse
      Hypergear Turbochargers and High flow Services Development thread

      By Watermouse · Posted

      Ahh ok, thanks again for your valued insight Tao
    • MBS206
      R32 GTS (RB20DE) clogged cat

      By MBS206 · Posted

      The hot exhaust light will come on not from just the cat being blocked, but it's just a temp sensor, and it's designed to warn you to not do things like park in long grass.   If you've been pushing the motor a bit, it can cause the light to come on.   Second if the cat is rattling, I'd suspect it's not blocked, but instead falling apart inside.   The easiest "fix" until you can get a cat put back in, is to unbolt your one, bash the rest of the insides out, and then bolt it back in.   For a daily driver/street car, I am in agreeance of put a cat in the car. If it were race car I wouldn't care if it were removed.
    • Sean'O
      3D printing fun

      By Sean'O · Posted

      No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Duncan
      3D printing fun

      By Duncan · Posted

      Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • Duncan
      R32 GTS (RB20DE) clogged cat

      By Duncan · Posted

      I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
×
×
  • Create New...