Jump to content
SAU Community

Recommended Posts

With all the massive power being made, I think it's time for a 500+kw(wheels) to see what has been tried and tested, and to compare combinations, similar to the 400kw thread.

List as much of your mods as you wish as the more info the better: engine, turbo,cams, boost etc etc

I will start:

RB26 stock block

Apexi SPL V-Max 73.7mm billet crank

Apexi SPL V-Max rods

HKS Step 3 87mm with 22mm pins

Apexi SPL V-Max 290 11.5mm cams

Apexi SPL V-Max Springs, retainers & lifters

Supertech +1mm valves

9.0:1 CR

HKS twin GT3240 + twin gates turbo kit

Trust sump (modified)

External single stage Moroso oil pump (wet)

Apexi SPL V-Max Drag intercooler (150mm)

3" dumps > single 85mm exhaust

Microtech LT12S

3 x 044's + large surge tank

6 x Bosch Indy Blues

Caltex E85

520rwkw on 22psi on a very safe tune, no cam timing, and low rev limit.

Plenty more in it with more tuning, boost, revs and cam timing, but this will do for now.

Link to comment
https://www.sau.com.au/forums/topic/411489-500kw-club/
Share on other sites

RB30/25DET

NITTO/JE pistons 22mm pins

NITTO I beam rods

NITTO 1.2mm Drag headgasket

ARP Main studs

ARP Head studs

Nismo Engine mounts

9.5L ASR sump

Moroso external oil pump

ROSS Harmonic balancer with pump drive kit

Ported head

HKS 256/264 cams

Greddy Plenum

Q45 throttle body

Speedfab Exhaust manifold

Twin TIAL 36mm Wastegates

HKS T51R KAI turbo

4inch Custom turbo back exhaust

100mm Intercooler

52mm Alloy rad

SPAL 16inch thermo

2000cc ID/Bosch Injectors

SX Fuel reg

Twin entry fuel rail

2x Bosch 044 Fuel pumps

Nismo Intank Fuel pump

3L Surge tank.

E85 Fuel

Standard RB25DET gearbox

JB Single plate Full Monty clutch

Tomei Trax 2 way LSD

Supporting mods etc etc etc

547rwkw@25psi

Trapped 137mph on a practise run then blew the diff. :(

Link to comment
https://www.sau.com.au/forums/topic/411489-500kw-club/#findComment-6577905
Share on other sites

Dave's list in black!!!

RB30/25DET

NITTO/JE pistons 22mm pins

NITTO I beam rods

NITTO 1.2mm Drag headgasket

ARP Main studs

ARP Head studs

Nismo Engine mounts

9.5L ASR sump

Moroso external oil pump

ROSS Harmonic balancer with pump drive kit

Ported head

HKS 256/264 cams

Greddy Plenum

Q45 throttle body

peedfab Exhaust manifold

Twin TIAL 36mm Wastegates

HKS T51R KAI turbo

4inch Custom turbo back exhaust

100mm Intercooler

52mm Alloy rad[/font][/color]

SPAL 16inch thermo

2000cc ID/Bosch Injectors

SX Fuel reg

Twin entry fuel rail

2x Bosch 044 Fuel pumps

Nismo Intank Fuel pump

3L Surge tank

E85 Fuel

Standard RB25DET gearbox

JB Single plate Full Monty clutch

Tomei Trax 2 way LSD

Supporting mods etc etc etc

547rwkw@25psi

Trapped 137mph on a practise run then blew the diff. :(

Link to comment
https://www.sau.com.au/forums/topic/411489-500kw-club/#findComment-6578235
Share on other sites

Full boost at around 6,300. Only revving it to 8,750 for now. will lift it to 10K when it is re-tuned later.

Traction? What traction? :D I have only driven it in RWD as my attesa isn't working and on stock wheels and tyres.

Link to comment
https://www.sau.com.au/forums/topic/411489-500kw-club/#findComment-6579526
Share on other sites

Power was still increasing at 8750 and on previous tunes (with smaller turbos) power keeps rising steadily to 10K. We have found that rwhp output for HKS turbos can match the HKS rated figures of their turbos. The GT3240's are rated at 580hp each (@1.4 bar). On an RB26 in twin form, they need to be pushed hard (around 2.5 bar) to get over 1000rwhp.

Link to comment
https://www.sau.com.au/forums/topic/411489-500kw-club/#findComment-6580969
Share on other sites

The 3240 is basically a 3540 with a cutback rear wheel, fitted into a GT30/28 rear housing (0.87).

With E85 and an RB30 I am not surprised you're making 750+hp @ 1.7bar with a large HKS single. I would love to swap to 0.73 rears or even 0.61's as the 3240's only come in 0.87

My tuna thinks that 2.5 bar is what it will need to get to 1000.

Link to comment
https://www.sau.com.au/forums/topic/411489-500kw-club/#findComment-6580977
Share on other sites

  • 1 month later...

Hi everyone,

About time we posted this up - here are the specs on our "NITTO" R34 GT-R:

STANDARD RB26DETT bottom end

ARP headstuds

Nitto Headgasket

Standard oil pump

Custom head by Mercury Motorsport

6Boost mani

Precision 7675BB turbo

Twin Precision wastegates

4" exhaust custom made

Haltech Platinum Pro ECU etc.

Upgraded fuel system

Splitfire coils

100mm thick FMIC

Custom i/c piping

OS Giken sequential gearbox

Power: 622awkw/845awhp @ 43psi (ran in 5th gear, to keep the 1:1 ratio due to gear changes, 6 straps holding it down)

Here is the vid:

Link to comment
https://www.sau.com.au/forums/topic/411489-500kw-club/#findComment-6649687
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The MX5 has had some annoying rattles in both front doors over bumps So I installed fancy pants door bushings, which stopped all of the rattles with the windows up, but........with the windows down there was still rattles, so after some googling,  and a chat with MX5 Mania, I got some new door to glass weather seals, all the rattles, windows up, or down, are gone now Shout out to MX5 Mania, the weather seals were on sale, and when I head to Dural to pick the up they even fitted them for me for free I did see a "really" nice Blue NA sitting out front   and this Black NC PRHT that looked like it has sat in the sun for its whole life and never had a wash, the clear coat was non-existent, an it looked horrible, really horrible, but, it had a nice turbo kit with over 200kw, the thing went like a cut snake, bagging the rears through the gears and dosing like a champ 😍 But, as I've always stated, I am keeping my NC na, I'm happy with the current power the car makes In other news: MX5 Mania do a drive in drive out turbo kit, the only minor additional part recommended for boosting my car, as it sits now, is a oil cooler, and that bonnet vents are definitely required for track use Aftermarket version look a bit to "racecar" spec I wonder how Focus RS bonnet vents would look?????
    • Paint is only structural when applied to the outside of Chinese and Indian cars. Otherwise it should never be present between mechanical joints that were intended to be metal to metal. Pain slips, slides, cracks, compresses, and add thickness that wasn't intended to be there. It comes firmly under the category of "just no".
    • appreciated it thanks   There are threads on the adaptor. I rear re anodising but didn’t know it will reduce strength   re mating services needing to be flat/ not painted, why would that be? I am devastated as car been off for a year, fixed power steering then installed bm57 master cylinder and just before driving it this came up. So annoyed   worried and afraid to drive it, no fun caliper coming off    
    • Just report the OP (via the 3 dots menu at the top right of post) and request deletion.
    • And boosters can be rebuilt by the same sort of brake shops that will rebuild a brake booster.
×
×
  • Create New...