Jump to content
SAU Community

Recommended Posts

Guest INASNT

I need a few calculations which i could do myself but i cbf getting out notes or books to work em out.

Questions :

If u were travelling at 130km/h for 800m how long (seconds) would it take to travel that distance?

How long would it take to come to a complete stop from 130km/h and how many meters to stop in a normal VT commodore V6?

How many seconds would a VT commodore exec take to accelerate to 130km/h and and how many meters would it take for it get to 130km/h?

Link to comment
https://www.sau.com.au/forums/topic/41150-questions-for-the-maths-gurus/
Share on other sites

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

yes you could work out the stopping distance/time but there are many things that are required, weight, brake size, caliper dimensions, brake pad material and others as well i think, not worth the effort really

same for the acceleration, many factors that affect the time and probably wouldnt be overly accurate

Guest Munky

22.153846...... seconds to go 800 metres

To do this just work out how many metres per second the car is travelling at (its speed / 3.6)

Then divide 800 by the figure you get from the above calculation.

Basically its just a case of manipulating the simple identity

Velocity = Distance / Time once you get the velocity in m/s

its pretty hard to do the acceleration question without some figures to go with it (ill look for some)

Guest Munky

How many seconds would a VT commodore exec take to accelerate to 130km/h and and how many meters would it take for it get to 130km/h?

Using the figures of a supercharged 5.7L V8 Commie VT (So it's inaccurate - I couldnt find figures for the one u specified)

Assuming it accelerates at constant acceleration, and using the figure of 5.89s 0-100kph

v = u + at

0 = 100 + 5.89a

therefore a = approx. 17 km/s

So now using v = u + at again

130 = 0 + 17t

therefore t = about 7.64 seconds

Now just doing a simple calculation of distance travelled = 1/2vt

The distance travelled is about 138 metres

I think that should be right but I havent done any mechanics/physics questions for about 7 months (since I finished hsc) It sounds right though (at least for a supercharged 5.7L v8)

I think you'll find that you can't do the stopping question without a figure on the deceleration figures of a commie.

Guest Munky

If u go by 1/4 times for a exec commo dont they do 16 in the 1/4, but at what speed?

It's almost impossible to figure this out because once your doing 100km/h obviously your car won't accelerate at the same rate as it was for 0 - 100. So its speed might only increase by 40km/h in the last 10 seconds of the 16 secs (as opposed to the 100 km/h it increased in the first 5.98 seconds if ur using the supercharged specs)

That's why the original calculation probably isnt very accurate either, since I just took the average rate of acceleration and assumed it was constant for the entire 0 - 100 (then kept assuming it was constant till 130km/h) In reality it would take longer since the car won't increase in speed as quickly as it did off the mark (ie. the rate of acceleration will drop so that the rate of acceleration by 130km/h is no longer 17km/s^2)

Someone get clocked by a NON-RADAR-EQUIPPED police vehicle huh?

Sounds like you're trying to work out if they were following you for long enough to get an accurate guesstimation of your vehicles speed... That and they must have been going in the other direction when they saw you...

Am I close?

Good luck dude.

Adrian

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Back on topic for you for a post Will it be on pump or ethanol? 2025 Spec RB build: G30 660 .83 would be good  artec manifold turbosmart 45mm external gate 1000cc Injectors Kelford cams 264 and springs Pistons and rods for insurance Oil pump with billet gears Headdrain and all good oil mods Quality intercooler 3.5 inch dump pipe to decent exhaust Link plugin Ecu or what ever your tuning is comforatble with Bolt on Trigger Kit - Nzwiring kit is go to ARP Headstuds Quality headgasket quality fuel pump- a TI/walbro 525lph PWM would be the go Quality fuel reg Will be over $15K AUD Enjoy the noise of rb on gate at over 7400rpm. Start looking for gearbox conversions if your hard on the gear. Now I've been there and done that with rb powered street car (2007-2022) much prefer newer stuff. Anything 90's Japanese is not a great experience these days and highly over rated. My 2015 Brz with a heap of suspension mods is such a better car even with out the power of my old s chassis' even on track. If wanting to play light chassis and decent power for a  giggle a k swap 86/brz would be the go Check my old build for engine stuff I really need to pay attention to post 2016 BMW stuff but seem all very heavy 1600+kg  
    • I mean, the 240i is not a Supra... make it drop a few hundred kg, have a sportscar chassis, clearance for wheels etc... Maybe I want a hardtop Z40i XDrive or something :p I do agree with you though and have long said the B58 Supra/240i/340i/440i is the new R Chassis/JDM90's turbo rocket for mod lovers to ... not always appreciative response lol. Doesn't make it not true though.
    • I will do the build myself but I will be paying for the tune because I don't know how much about that and would rather it be done right and by a professional 
    • Will you build and tune it yourself or do you need to pay for labour? 
    • Mechanically that's essentially what the M240i is, it's just not pretending it's not a BMW
×
×
  • Create New...