Jump to content
SAU Community

Recommended Posts

Recently had a track day and managed to blow a manifold gasket, upgraded to a steel gasket and put the car back together.

took it for a drive to make sure she was running right and it runs terrible, hesitating coughin when boost starts to come on. sort of like the coil packs are shafted but ive only replaced them about 3 weeks ago.

any body got any ideas?????

Link to comment
https://www.sau.com.au/forums/topic/411659-rb25-breaking-down/
Share on other sites

exaust gasket, its not blowing any smoke that i can see, i got fuji spark coil packs as it is a budget car at the moment, but i checked coilpacks last night and there all fine so i changed plugs and still runs like ass.

ive narrowed it down to a "boost leak" but question is how to i find it??

I think I've heard of Fuji coilpacks before, someone else put them on and they were misfiring straight out the box or soemthing.

Although I just found the link, the person in question actually had one of their new coilpacks die: http://www.skylinesaustralia.com/forums/topic/407220-help-r34-rb25de-changed-coil-packs-ran-well-for-approx-40kms-then-started-misfiring-again/

ive checked coils and there all good i ve checked for leaks and could find nothing at all, i am ganna pull the turbo off tonight and check for cracks. i am startin to think there might be a crack in the waste gate maybe..

how are you coming to the conclusion that the coils are all good?

Just because they look fine doesnt necessarily mean that they are fine...

Had a friend who bought yellowjackets barnd new have them fail after 3 months. 'Looked fine' still tho...

ok thats a good start n fair enough

But you say in the OP that the issue is when you are driving it and coming on boost.

So while the coilpacks might be able to work fine at idle they might still be having issues under load. Which is of course their usual point of issue- under load, coming onto boost and in particular at 4500rpm WOT....

sounds a lot like a boost leak, just because it does it coming on boost doesn't mean it's coilpacks

the pipe can be holding together enough which lets the car idle and drive off boost but when you put some pressure there it the leak opens up and cause your issue, sounds like a silicon hose joint not done up properly

I changed the turbo last night to make sure there wasnt any cracks or leaks, re gaped sparkies to .6. Ive checked and checked for leaks. The car runs rough as guts on idle. Doing a compression test tomorrow just to make sure then will start the elimination process again

There would have to be a fair bit of oil to be getting past the rings to make it run rough as guts, it would also be chugging out white smoke. Best to rule out the coils being he problem first.

With those compression numbers a rebuild would be on the horizon but it doesn't mean you shouldn't properly diagnose the problem first.

A good way to check the coils is just to have a look at night with the car idling, usually the bad one will arc a bit giving you a little flash of light, but my rb20 was doing the same thing, kept trying different things, spark plugs and gaps, but it just turned out to be the coils, when I had vacuum leaks it would usually start missing much earlier than what yours seems to be.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok gotcha, so one post to fpr  another to bov  and I have the mishimoto boost controller and a link g4+ so I’d just have the tuner set it up properly. For the last two from plenum post throttle to  ecu/ boost controller, I know that I have a hose coming from the ecu that I was confused about so I assume that’s what connect to the boost controller from the ecu? And then the last is just from plenum to boost controller then to wastegate?
    • From there, it was just a quick electrical check, prime the oil and start her up Which, is not what happened. 1. Bloody seppo Aeropro battery holder. Not only was it too tall for the battery (which I'll forgive them for, I have another battery the same nominal size that is taller than Neil's one, but the bracket is a fixed height so the battery was spaced up) But the thing that really shits me is the hardware to hold it on requires a 7/32 Hex key. WTF. No-one will ever be able to remove or install the damn thing without a hex key they don't own 2. Kill switch no longer worked once the console was installed. Neil mentioned above he had to adjust the length but it no longer cleared the console once installed. Sorted. 3. Suspiciously, the brake light holders were hanging in the boot with no globes. Sure enough the stopper on the brake pedal was missing so they are always on unless the kill switch is activated. Will pick one up tomorrow (turns out 32 and 33 don't use the same stopper) 4. All that sorted, I turned on the kill switch, turned the key to ACC. Nothing. Turned it to IGN. Nothing. Checked some fuses and found the main IGN in the boot was missing which improved things once it was replaced. Now ECU and dash lights turn on with IGN but still no fuel pump. 5. Turned it to Start....ECU on, no fuel pump, no starter. Plus the voltage dropped straight to 9v.  I suspect the starter is f**ked but am going to have to work through it all and see what is happening, really looks like more than one issue. Does anyone have the R33 fuse box key with the circuit it sources from (eg BAT, ACC, IGN, SRT etc) and supplies? I can find a translated list showing Amps and circuit without supply circuit, and I can find supply circuit without Amps and target circuit.
    • 3rd time lucky, the AAC is now all plumbed up after getting some final fittings All set up under the plenum of maximum access
    • OK, so the weight has been bugging because it was really low. I did it again today and got a more believable answer at 1246 without driver And with a 93kg driver I'm pretty sure the car was still slightly on the quickjack last time meaning the full weight was not on the scales  
×
×
  • Create New...