Jump to content
SAU Community

Recommended Posts

hey guys.

I'm looking at getting a turbo timer and i'd always thought they were in the price range around $100, so im a little surprised at the prices i've come across on ebay.

One item particularly is a HKS turbo timer and im wondering if it's fake due to the low cost or if it's a genuine HKS turbo timer and if this would be worth getting.

Another thing im interested in is the turbo timer advertises that it can automatically set perfect idle times for you, im wondering if anyone can validate that this is true?

Also, are turbo timers generic and fit to every car? I need to fit it to a turbo R34.

The item link:

http://www.ebay.com....984.m1423.l2649

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/411770-ebay-turbo-timer/
Share on other sites

I really want to take care of my car and as such i idle it to cool down whenever i've been giving it a bit and even if i haven't i still give it about 30 seconds of idle time.

I'd just rather cut out the time i have to spend waiting for it.

Don't drive like a hoon for the last 5 minutes of your journey. Job done. What about brake temps and every other fluid in the car? ( I know it's not like your diff and box will get extremely hot on the street, but the point still stands)

I am aware it doesn't have any additional benefits to the car, but it prevents me having to sit in the car and leave it idling for a minute.

Which has been annoying many of my mechanically impaired friends who are like 'JUST TURN IT OFF!'

Which has been annoying many of my mechanically impaired friends who are like 'JUST TURN IT OFF!'

They don't sound that impaired unless you've been flogging it. The system is designed to circulate coolant through the turbo after the engine has stopped.

Plus you can't leave it in gear which would suck on a hill and probably annoys your neighbours if it had a loud exhaust. Save your money!

I read in the owner manual that if you have been driving over 80km/h for a long time, you should give it about 1 minute.

if 100km/h u should give it 2 minutes.

something like, heavy boosting and hard time, 5 minutes.

+1 to all the above.

I got one against all advice back when I first turbocharged my car. If I could go back, I'd flick myself in the nut for it. They're farkin annoying. Honestly, I've got a genuine Apexi one and if I could be bothered removing it, I'd give it to you 100% free.

Edited by Hanaldo

I read in the owner manual that if you have been driving over 80km/h for a long time, you should give it about 1 minute.

if 100km/h u should give it 2 minutes.

something like, heavy boosting and hard time, 5 minutes.

Show me this.

a few minutes of insurance wont hurt it, i use mine when its cold too, set it to 3mins idle, what happens when the mechanic flogs it and then turns it off at the garage?

Edited by SliverS2

Hanaldo, it's in a printed off owners manual that came with the car.

But it's 100% in there, the minutes might be incorrect, but definitely has an idling time for 80km/h, 100km/h and something else such as 100+

a few minutes of insurance wont hurt it, i use mine when its cold too, set it to 3mins idle, what happens when the mechanic flogs it and then turns it off at the garage?

Get a mechanic you trust or do it yourself.

a few minutes of insurance wont hurt it, i use mine when its cold too, set it to 3mins idle, what happens when the mechanic flogs it and then turns it off at the garage?

Don't take it to a mechanic :P Or get an ecu where you can set the rev limit yourself ;)

Seriously though, why do people like to idle their car so much? Engines don't operate efficiently when they are idling.

Yeah I bought one off eBay for my mate. Turned out to be fake, wouldn't trust ebay items for that price just grab one from a legitimate site.

I have one in my car, doesn't hurt to have one, got mine form hi octane for about $100.

Yeah I bought one off eBay for my mate. Turned out to be fake, wouldn't trust ebay items for that price just grab one from a legitimate site.

I have one in my car, doesn't hurt to have one, got mine form hi octane for about $100.

Yeh this isn't really correct. Aside from it being yet another thing that can go wrong, you guys do know that idling isn't good for your car yeh? I mean yes, idling for 30 seconds to cool it down isn't going to kill the motor. But it isn't saving it either. It's doing nothing good, which means the tiny bit of bad that it does makes it a bad idea.

But hey, I digress. Here I am preaching about it while mine is still in my car, albeit NOT FARKIN WORKING.

Edited by Hanaldo

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For sure the later RB26 variants had a different setup (6 cam voltage sender?), but the RB25DE/DET share the same ECU pinout/PCB footprint, and at the ECU plug it ends up being 'throttle sensor in' & 'throttle sensor out' (to A/T TCU) ...you stick a multimeter on these pins and you'll find them directly connected (0 ohms) ; I had an pair of Nissan ECUs on the bench long ago, and I noticed this throttle sensor in/out link, actually linked to an op-amp ...which was unpopulated on the NA board, but present on the T board and I went 'ah-ha!' in some moment of clarity... ...it wouldn't surprise me if they changed strategy here though (in the software and actual monitoring of this signal), because they did with other stuff (A/T signals).. and 0.45v as a trigger point makes sense, as that's what the external TCU units expect at idle ; kudos, thanks for that insight...I suppose it boils down to whether or not Consult can display real time data of that signal's voltage... ...in any event, it presents the same target...ie; rotate TPS unit to achieve 0.45v to suit both ECU&TCU, and where do you goto from there? Just disconnect TPSwitch connector and/or that plus TPSensor connector....or do you go for the throat and disconnect IACV solenoid and see if it still stalls? (probably throws a recoverable fault code and goes for default idle strategy?)...
    • I’m also conscious that e85 is slowly being phased out. Not all United’s have them anymore. Can’t take the risk of being low on petrol and assuming the servo will have it. 
    • MR HAMMER has said his piece. Painted up to avoid Rusty Rusty. Actually lines up well. (i.e it lines up the same as the unmolested GTR guard). Turns out the GTR Strut brace does foul on the bonnet vents ever so slightly. May need a little bendy bendy if intended to keep using with a strut brace. So spacing it out to clear the FAST102 is not an option. Annoyingly, the bonnet vents also foul on the heater lines running over the engine. Given this engine does not EVER require a heater, a delete loop is going to be used. Don't worry, the defogger uses the AC. The heater is basically "Do not use the aircon and turn the fan on". It will still be effective, I promise.... once I get the system regassed... Will have to revisit with unvented bonnet I suppose, and suitable strut brace. There's plans to do this and other things tonight and bleed brakes (there was a weep) and put the bumper back on, and take Good Friday morning - Because troubleshooting on the side of the road limping it home at midnight tonight is ... not very smart.
    • Thank you all for you assistance. I contacted Nistune regarding the support for the RB20DE along with my ECU Code (23710-10U00). They do have a map for it and added the RB20DE as a purchasable option now as well. They also added Malta as a Billing and Delivery options as this was missing. I was honestly amazed at their quick response and action, it took less than 24 hours. I also looked again at direct fit options for injectors, just in case I were to replace them. DeatschWerks seem to use a Bosch EV14 base and makes ones that fit mine at 440cc lowest, but also have 550cc at the same price. I tried looking for other direct fit options and managed to find one (also Bosch EV14 based) which includes a plug and play adapter on ebay. Did a small test with a Noid Light on the troubled injectors and all seems good, so they are pulsing properly electrically. One weird part is that they are missing on the same two cylinders as before I got the injectors cleaned. Mechanic also found this weird as he did not label the injectors and it is unlikely to have the faulty injectors be installed in the same cylinders.  
×
×
  • Create New...