Jump to content
SAU Community

Recommended Posts

hi guys my 32 gtr starting creeping forward when i pulled up to an intersection when i had it n first gear and was hard to pull back into neutral when clutch was in all the way

what could the problem be and how do i diagnose whether its the slave cylinder or master cylinder ? the fluid level still seems to be pretty full .

also clutch is brand new

please pm me

thanks

As you're not loosing fluid I'd suggest adjusting your clutch pedal, check my post in the thread linked below:

http://www.skylinesaustralia.com/forums/topic/361743-clutch-pedal-at-bottom-of-travel/

yeah but it grabs normal when u let it out its like there not enough pressure holding the fork . ps it comes and goes aswell its not like this all the time it just started doing it

  • 2 weeks later...

A few things to check before freaking out at the possible cost of a fix. Check the bedal bracket for cracks or breakage, Check the slave cylinder for travel and also bleedback/creep and check the fork, it may be flexing due to a cracked limb. If its not any of these, start saving.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I had no transmission at all so I managed to find a big box manual gearbox from an R34 GTT for an insanely good price in EU. I converted it to push type which cost more than the transmission almost, with parts from Amayama! These engines are very strong and can put out decent power with a properly sized turbo. You can save on money from parts like pistons and rods, and invest those in the transmission and other parts. I suggest you join the RB20 Enthusiasts facebook group, plenty of info and almost daily posts there about 20DE/DET/Neo+T builds. (I hope I'm not breaking any forum rules by mentioning third party platforms, just trying to help the buddy out)
    • Yeah, having tried all of those methods including BBQ+recipro/hacksaw, I ended up buying a bush press kit under $150 that works well, like this: https://www.ebay.com.au/itm/355967727167?mkcid=16&mkevt=1&mkrid=705-154756-20017-0&ssspo=sfmmuhxgqhm&sssrc=2047675&ssuid=dJvnaZ11TB-&widget_ver=artemis&media=COPY It basically has a range of pushers and cups with threaded rods between to press out a range of large bushes. The problem with any sawing solution is minimising damage to the subframe side, although it probably needs a quick sand afterwards no matter what solution you try due to damage
    • Hi. Thanks for the answer. I do not have instagram 😄 I too considering turbo the RB20DE NEO 🙂 But i think i upgrade the gearbox first or at least buy new.  
    • Just pulled the passenger apart so got a good idea, also the side bracket that pivots the top half is completely cooked.. how I don’t know.. haha and paid $400 also included a photo of the passenger seat! She is mint
    • I managed to get the foam will the original upholstery off in one piece, so will be an easy to re fit thankfully.
×
×
  • Create New...