Jump to content
SAU Community

Recommended Posts

I'm a volunteer carer for a 95 year old man each Sat. + his power of attorney.

He's in an aged care facility and needs to sell his car.

Anyway, if you need a daily, here it is...

P1040966.jpg

P1040965.jpg

It'll be advertised in the local rag this Wed for $9,900 which you can grab now or...

if it's not gone by a fortnight, (which you can wait out), I'll reduce it here on SAU by $1000

Tom bought this new in early 2010 (with a build plate of 2009). I think he paid $15,900

At only 2700Km, you can tell it's had little use (at 1000Km/Yr).

It's a 3 Door Automatic & 1.4l engine > drives like a new car.

It's still under new car warranty - and for another couple of years I think.

It's best to call my Mob: 0416214699 if interested.

Link to comment
https://www.sau.com.au/forums/topic/412041-getz-with-2700km/
Share on other sites

Yes well two of those people called up afterwards to check if a deposit had been paid.

I guess quite a few people seek out a car at 37% off new price whilst only having travelled literally 'demonstrator' Kms - even when the model has been discontinued.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • See my post here If you put the Haltech in, you won't have to worry about any of that. And, in case you're worrying about my lack of credentials in doing your exact swap, I put a Neo in an R32. There has never been a stock boost solenoid near my car and the Neo's ECU has never cared. Nor should it, because it is electronically impossible for it to care.
    • That's 100% wrong. Did you wire in the boost sensor? If you did not, then that is 101% your answer. Neo ECUs do suck a bit.
    • Hello, I'm trying to make this thread basically the thread with all the answers to common questions regarding specifically the RB20 DE NEO + T engine, that comes in the R34. Answers will and only should be provided by those who have done this conversion or actually have some relevant real life experience please. Please feel free to ask questions in the comments if you have any so other members can answer. I feel like this thread is really needed, especially with more Americans buying (unknowingly going to regret it too) rb20 neo r34s. My first question being - What do you guys use for tuning? I have purchased a haltech elite 2500 Plug and play kit for the rb25det NEO because the ecu plug is the same, but I am unsure if any of the pins would need to be repined to match. Second question that I see asked very often - After this conversion, did you install the boost solenoid/ actuator? I see many people doing a + T setup on their rb20 NEOs while running stock RB25DET NEO ECUs with no tune. I am wondering how they are going about doing that and consistently abusing the car because many of these people have had these untuned setups running for a very long time. That was my original plan, but my engine cuts out at 5 psi of boost using the stock ecu with no tune and no boost solenoid/actuator.
    • interesting. ive read and heard otherwise over the past year. ive been doing this +t conversion on a rb20 neo using all oem rb25det neo parts including the ECU, and im having engine cut out issues when I hit around 5 psi of boost. Everywhere/everyone ive asked has told me its because I never wired in a boost solenoid/actuator to the ecu, so the ecu isn't getting the right signal once it hits 5 psi of boost, causing the engine to get shut off.
×
×
  • Create New...