Jump to content
SAU Community

Cruise Control Sales/install - Melbourne

180Shauny

By 180Shauny,
in Four Door Family & Wagoneers

 Share

Recommended Posts

AAA34T Community Regular

AAA34T

Posted
Posted

Try calling a company called cruise control specialist in sydney see if he has a contact in melbourne. or a company called autron in melbourne they sell cruise controls they might have a reccomended installer.

Commsman Veteran

Commsman

Posted
Posted

The ones I supplied were AP-900C as sold here by C0mmand. The 'C' is for CAN-bus, but that part didn't work in our favour, so the (cheaper?) AP-900 will do.

If you get someone to supply/install one for you, get them to leave the stalk unmounted. Nicest result is with the backlit steering wheel controls. Can buy them from Nissan for $75 - $80, & that includes the stereo controls as well - ie both sides of the wheel have buttons.

The AP900 is user programmable for response/overrun etc. Very handy if you make changes to your car (especially different turbo) as it allows you to change the settings to suit yourself.

Chris' kit should come with steering wheel controls, but they are the older style (from what I have heard/seen in the past) & don't come with LED backlighting. Not a big deal I suppose, but those of us with the newer switches really appreciate not having to remember what button does what in the dark.

I heard from a M35 owner in the Newcastle area who found someone to supply & install one like mine for ~$750 (no switches), & I thought that was a pretyy good deal for a locally sourced unit.

If you don't want to think for yourself & do much chasing around, then get one from Chris as it will work fine.

Before I bought 20 in from the manufacturer, Chris didn't allow DIY install on his, & the installed cost was $900. I wouldn't have bothered if I could have bought his kit for ~$700 & installed it myself. Looks like he changed his mind.

In case you are wondering, most people bought mine for <$500 inc switches

pv35gt8 Collaborator

pv35gt8

Posted
Posted

I recently had the Command AP900 system fitted to my car for $750, Freeway Car Audio in Dandenong.

They will probably want to check the car out first to make sure/double check wire colours for the harness.

The kit I got has the RF controller, no stalk at all and the passengers in the back can set the cruise.

iamhe77 Grand Master

iamhe77

Posted
Posted

I recently had the Command AP900 system fitted to my car for $750, Freeway Car Audio in Dandenong.

They will probably want to check the car out first to make sure/double check wire colours for the harness.

The kit I got has the RF controller, no stalk at all and the passengers in the back can set the cruise.

Noted :ninja:

Commsman Veteran

Commsman

Posted
Posted

I recently had the Command AP900 system fitted to my car for $750, Freeway Car Audio in Dandenong.

They will probably want to check the car out first to make sure/double check wire colours for the harness.

The kit I got has the RF controller, no stalk at all and the passengers in the back can set the cruise.

That's a good price, for Aust supplied retail.

Not sure about the controller tho. Besides not wanting anyone else playing with the CC whilst I'm driving, it will need batteries every now & then. I had a few C0mmand IR controllers on my work car stop working (break) before I tossed the lot out. Your RF one may be more reliable, but I like that the factory switches are good quality, wired in & just for the driver, lol.

Commsman Veteran

Commsman

Posted
Posted

It took about 3-4 hours from memory.

That's pretty standard for 1st time. (It took me >2 months to get mine going initially, haha).

Like anything, subsequent times would be much less, ie <2hrs.

pv35gt8 Collaborator

pv35gt8

Posted
Posted

Not sure about the controller tho. Besides not wanting anyone else playing with the CC whilst I'm driving, it will need batteries every now & then. I had a few C0mmand IR controllers on my work car stop working (break) before I tossed the lot out. Your RF one may be more reliable, but I like that the factory switches are good quality, wired in & just for the driver, lol.

The factory switches are the reason why I went for the RF remote, once installed I will be able to throw the RF controller in the glove box and forget.

Commsman Veteran

Commsman

Posted
Posted

The factory switches are the reason why I went for the RF remote, once installed I will be able to throw the RF controller in the glove box and forget.

Ahh, I see. Good choice :)

If you need any info/help on setting up the switches, read my thread on m35stagea.info or message me.

180Shauny Enthusiast

180Shauny

Posted
  • Author
Posted

Wow thanks for the in depth info guys. So far I have rung Autron and their Melbourne installer No Limit want $880 to supply and fit an Autron cruise complete with the little control button box to go on the side of the wheel or a stalk.

Chris charges $710 delivered for his cruise which includes the Nissan switches (can't confirm if backlit or not), he said it was a Lawrence & Pederson unit that is commercially fitted to a number of vehicle brands.

The deal from Freeway Car Audio seems pretty good then, I guess the only thing I'm thinking now is, if I DIY my cruise, sell the car and it malfunctions, who's arse is going to get kicked for it? Is there legislation covering the installation of cruise controls?

180Shauny Enthusiast

180Shauny

Posted
  • Author
Posted

So I rang Freeway, they quoted $690 installed for the CP900 which seems very reasonable.

I'd probably just get them to fit the stalk as I'm used to a stalk and think it is the most ergonomic arrangement for my hand when my arm is resting on the armrest whilst cruising. You can just adjust it with your fingertips instead of having to move your hand onto the wheel centre itself. Just my 2c of human factors engineering.

PV were you satisfied with the workmanship and the quality of kit itself?

Commsman Veteran

Commsman

Posted
Posted

So I rang Freeway, they quoted $690 installed for the CP900 which seems very reasonable.

I'd probably just get them to fit the stalk as I'm used to a stalk and think it is the most ergonomic arrangement for my hand when my arm is resting on the armrest whilst cruising. You can just adjust it with your fingertips instead of having to move your hand onto the wheel centre itself. Just my 2c of human factors engineering.

PV were you satisfied with the workmanship and the quality of kit itself?

CP900 or AP900?

In any case - good price for installed cruise, especially if you want to use the stalk. I think there's really only one spot to successfully mount the stalk & Andrew's turned out good in that regard.

Not sure about ergonomics, but if it's good enough for the factory...

post-76144-0-06786300-1351135826_thumb.jpg

Plus you get audio controls thrown in. That's worth the effort IMO.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Goombeh
      Enkei RPF1 18x10.5 +15 - Vic pickup

      By Goombeh · Posted

      Hi, does anyone know how I can, or can a moderator remove this advertisement please.  Has been sold a long time ago and would like to remove references. Thanks. 
    • r32-25t
      R32 GTR clutch master cylinder adapters

      By r32-25t · Posted

      There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • weikleenget
      R32 GTR clutch master cylinder adapters

      By weikleenget · Posted

      We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
    • Duncan
      R32 GTR clutch master cylinder adapters

      By Duncan · Posted

      Yeah 4wd (boosted) has a recess in the firewall for the booster, and 2wd is flat - the example in the link shows the flat surface. When you deleted the booster, did you just attach the factory slave cylinder directly to the recess in the firewall with no adaption?  
×
×
  • Create New...