Jump to content
SAU Community

Recommended Posts

the fords and holdens sound a little bit different to previous years. obviously the new regulations have allowed them to make a few changes. i wouldn't be suprised if we see them change to more modern race engines over the next few years. both ford and chev have race engines in their catalogue with the same sort of tech as the merc and nissan

the fords and holdens sound a little bit different to previous years. obviously the new regulations have allowed them to make a few changes. i wouldn't be suprised if we see them change to more modern race engines over the next few years. both ford and chev have race engines in their catalogue with the same sort of tech as the merc and nissan

The current pushrods donks do an admirable job. They make the figures reliably and they're light in tne right places without multiple overhead cams n stuff .....

Great race, respect for lowndes ability even though I am not a fan.

I would like to know more as to why they have restrictors on the nissan donk.

They need to do something about fuel useage as well, It seemed like an eternity in the pits.

Great race, respect for lowndes ability even though I am not a fan.

I would like to know more as to why they have restrictors on the nissan donk.

They need to do something about fuel useage as well, It seemed like an eternity in the pits.

I'm wondering if the rate that they can get fuel into the cars has changed with the change in the location of the fuel tank. Smaller diameter pipe into it perhaps?

Can confirm that this moment was very awkward for everyone in the Erebus pits.

CH 7 asked everyone to be out of the pits after the start when everyone was standing there eyeballing him lol, did managed to move the sptools banners around behind shane though before we went out.

post-26183-0-46756000-1362362178_thumb.jpg

What a weekend

Very stressful on and off the track, just absolutely fantastic to see almost 12 months worth of work come together and hit the track.

Saturday we hit our first goal, 3 cars at the end of the race ( albeit 1 down quite a few laps ) and no damage. Lots of data gathered over the weekend. issues with the fly by wire throttle on the SP tools car which meant it was pushed off the grid and visited the pits a few times.

Sunday more electronic throttle issues in the SP car and the HHA car.

One of the obvious issues with the COTF is the cabin temps, was hearing around 92C in the foot well of 1 car. all 3 of our drivers have burns / heat blisters covering their feet. visited Dave Wall and the soles melted off his shoes and drove from around lap 50 with no sole just the shoe's inner materials

This is what Dave was driving with on saturday for 30 laps in the high temps

Ouch!!

so i missed the race and news, whats happening with these nissans??

Not the most successful weekend!

Not the most successful weekend!

if anyone thought that off the bat they were going to perform they should be slapped in the face tho....give them a season to get them setup and iron out the bugs then they will start to get the hang of things...

takes years to engineer a decent race car

if anyone thought that off the bat they were going to perform they should be slapped in the face tho....give them a season to get them setup and iron out the bugs then they will start to get the hang of things...

takes years to engineer a decent race car

Yeah but with COTF they are all pretty new cars.... They werent bad, just a few dramas.... The JD cars look pretty good on the track!

Most pre-season testing was short distances and probably in a cooler climate (cant remember where they tested and certainly dont remember the temps).

They were talking about how crazy hot it was in Adelaide

I think in a few races the Nissans might start coming good. Not saying they will be winning races, but think they will improve

The Mercedes might take a bit longer being that they were developed later then the others.

I think it wasn't even that hot at clipsal. I think I remember them saying it was just reaching 30, which comparatively is just warm. Seeing testing was over the hottest months of the year, you would have thought that this was encountered. I understand the point about the short runs, but surely the teams did some long distance runs, going through a whole tank.

Anyway, at least it will be worsted by next race. If it happens again, I would be well pissed as a driver.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It was roughly 3.5 hours.    car went in around 11:00 and I was done around 2:30 He did the initial runs, install the BC and then Nistune install and tune.  The best part was sitting in the lobby and hearing the skyline on full throttle at the dyno 😂😂
    • Glad it all went smooth. How long did the tuning process take?
    • Yeah that was kind of the same feedback my tuner gave me.  the boost tee is until I can sort out my plan for the electronic boost controller and what I’d get, where I’d mount the dash etc.  I’m happy with this until I can figure it out. Not a big fan of the A-pillar gauges. I’d like to get a clean install of the boost gauge - something digital like GFB.  Something like that might fit neatly where the ashtray is and look clean. I feel like replacing the OEM triple gauge is a bit extreme for a weekender like my skyline. And it’s not making crazy power to need all the additional sensors/gauges. 
    • I'm about to swap my box to Tremec T56 Magnum F & initially thinking of re-using my DCS twin plate (can get it re centred for the bigger spline) but it's been called out the box will be noisy (rattle) as the clutch is unsprung.  So I'm doing as much research as possible. I'm not so worried about holding the power as I'll go the track version which on paper will hold the maybe 1000hp I make. It's the longevity I worry about. DCS told me they don't use a sprung centre as it's just something that can break. The uni clutch has a very complicated sprung centre. Any one had or heard about any issues with it failing? Thanks in advance.
    • Auto is at least 10% (from my real, actual experience with different torque converters and manual on the same setup) ~185rwkw at 11.6psi (peak!) is entirely what one would expect without a FMIC or anything else on the intake, it does bleed off towards the higher RPM so it's what, 9psi there? Note: There is nothing that can be done about this with a manual boost tee. If you want to hold it steady and gain more top end, well - You will need electronic boost control.....
×
×
  • Create New...