Jump to content
SAU Community

Recommended Posts

Hey guys,

My partner hit her V36 while she was parking (pressed accelerator instead of brakes). We got in touch with two nearby repair shops who gave us the attached quotes and said similar things like heating up the bumper to fix it and then repainting it. Also, one of the grills broke but it's not that obvious so they said it would be up to us if we want to fix it or no. If anyone knows a good repair shop in Sydney (we live near Chatswood) then please let me know!! She does not have comprehensive cover at the moment.

Also, I wanted to ask what tyre pressure's usually recommended for 2008 V36 Skylines? We have got Dunlop tyres (245/45ZR18) on which it says max pressure should be 35 but on the car itself there's a sticker which recommends 34 for R19's. When we checked the pressure the other day it was 38 (we have had it for about 3 months now) and my partner panicked and brought it down to 32.

Any reply/advice would hugely appreciated. Thanks so much!

post-94510-0-57435100-1351426086_thumb.jpg

post-94510-0-74332800-1351426100_thumb.jpg

post-94510-0-10002700-1351426117_thumb.jpg

post-94510-0-67448500-1351426122_thumb.png

post-94510-0-80412700-1351426128_thumb.png

Edited by protik
Link to comment
https://www.sau.com.au/forums/topic/412556-urgent-v36-smash-repairs-in-sydney/
Share on other sites

$30,000+ car and no comprehensive insurance???

On a more constructive note, I run 32 psi on my 19's at all times. If she tested them after driving around for a while then its possible that they went up to 38 from 35. Way to high in my opinion though. Always check the tyre pressure when the tyres are cold.

Bump!

Would appreciate any decent repair shop recommendations in Sydney guys :(

Also, does front and rear tyres need to have same or different pressure? I just spoke to the compliance workshop that sold me the tyres and the guy is saying that I should put it back to 38 psi (although it's written max 35 psi on the tyres itself).

Really confused..

Edited by protik

I recommend my beater whom I've dealt with since the old man had the Maxima. Cullens Smash Repairs in Auburn - 9748 1820.

Top job and as for price, no idea since I have comprehensive insurance. I strongly recommend you pull your finger out and get yourself comprehensive insurance too. You never know when you might hit that Ferrari one day or if some uninsured twat hits your prized possession.

I run 38psi all day everyday on my 19s and 18s. Pretty sure you are reading it wrong on your tire. Its probably saying don't inflate more than 35psi when mounting the tire on the wheel.

How did your partner manage to damage the front and rear when accidentally pressing the accelerator instead of the brakes?

Those quotes look fairly reasonable if its for front and rear repairs.

No woman should be driving an expensive car without comprehensive.

Anyways, prices you have been provided look reasonable considering a brand new bumper is $800 ex. and a 2 months wait. If you are willing to spend some money maybe upgrade to the sports bumper.

My 19's run at 36psi probably should run it slightly higher, I'd say for 18's like yours maybe 34-36psi.

Cullens Smash repairs deal with prestige cars so they should be good as recommended by Max.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ayooo, been a while mates. I have a s2 r33 gtst and air stopped coming out of all the top vents.   My car has always made an actuator gear noise when turning the car on but that's a different issue I think? Did searches and am at process of thinking it's an actuator or some type of motor? I see a few different actuators and don't know which one. Would be nice to know if it was the one that's under the steering wheel so the dash doesn't need to come out.
    • Hi, just checking. Did you get this stuff made by Vspec Performance and at what price roughly? Looking into (sometime later) also getting such a intake kit, and Trust as well as HKS don't make a full set like this anymore.
    • 2025 Update PRP RB30 Black and Crank Shipped from Austrailia made it and was sent off to the machine shop. -700 to 800hp Service was done to the Block, which included: Inspection Prep and Black Brace to convert engine to 4wd oil Pan  Crank Fully prepped for 1000hp PRP RB30 timing belt kit w/ ALL options Nitto Pistons Nitto I-Beam Rods Nitto Oil Pump New OEM Nissan RB26 Cylinder Head Shipped Supertech intake and exhaust Valves over-sized Kelford 272 cams Mild Lift Nitto Headgasket All of the machine work is completed and next step is assembly and dropping in the new motor.   Upgrades (Changes) from the previous build: Engine Management - no longer using ECUMasters. Haltech Platinum Pro Turbo - Went from twin HKS 2530s with upgraded wheels to BW362SX-E Fuel - 1000cc injectors to ID1430x Single in tank Walbro 450 to Radium External Surge Tank w/ 2x Walbro 450s     I am looking to be back on the road by the end of summer. Wish me luck! monthly updates should be coming!    
    • Realised I never posted this , also I never got a price 
    • I'm glad to hear you've joined the SKI club. Spend the Kids Inheritance.
×
×
  • Create New...