Jump to content
SAU Community

Max Amps Pulled From Battery / Cable Gauge Required To Relocate Battery To Boot


Recommended Posts

I searched for a DIY guide on relocating the battery to the boot, and surprisingly couldn't find anything!

Can anyone advise on the minimum cable gauge required to relocate the battery to the boot? I have a heap of 8AWG cable (61Amp capable) which I realise is probably not going to be sufficient, but I am just wondering if I run 2 of the lines if it will be enough?

Cheers :cheers:

Justin

depending on the quality of the cable i recommend 2awg as a minimum preferably larger,

i measure a starter on a v6 commodore 160amps on cranking. which has lower compression so i assume less work would be needed to crank.

Cheer's for the responses :no: Looks like even 2 x my 8AWG wire is not going to cut it!!!

I think I will leave the battery relocation for another time.

2ga is more than plenty, it is also the same as the -ve line from a mig welder. Hit up BOC gas and just buy some welding cables, works out cheaper than 2ga audio cable :)

My Gtr had the battery relocated to boot, used 2gauge cable, never have a problem with voltage drop or any other electrical problems (apparently these cars are voltage sensitive)

6 Cyl Starter motors usually draw between 200-400 amps. No amplifier wire is going to cut it. You need minimum 2 gauge battery/starter cable. It's about $10/m at repco from memory

6 Cyl Starter motors usually draw between 200-400 amps. No amplifier wire is going to cut it. You need minimum 2 gauge battery/starter cable. It's about $10/m at repco from memory

welding cable works out a tad cheaper if you have a trade account :)

Also don't forget your starter motor will draw more current in winter and also when the battery is lower in voltage. You need to account for these factors so you don't catch things on fire. Safety first :)

I used 0 gauge audio cable. And I ran both earth and positive. I didn't want to earth though the body. U can't go wrong with over earthing.

Cost alil bit, but I hate wiring probs so I just over killed it so there won't b issues.

  • 4 weeks later...

What are people using for distribution blocks once they have relocated the battery? Having a bit of a look at options for such things at the moment.

stereo components really.. you just need a good ANL fuse & holder that that's it.. don't waste your time with anything else :)

What are people using for distribution blocks once they have relocated the battery? Having a bit of a look at options for such things at the moment.

Custom made...

Neutral bar with stand offs in a jiffy box.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • I love my R32 interior but then I also love the generic 90's nissan vibe from R33s/S14s/Pulsars etc 100%
    • I have seen this happen in cases like the R33 GTR where they eliminated the ATTESA actuator rod retaining clip to save 5 cents. Parts diagram references it, the actual part doesn't. Also if you try and look up the specific retaining clip on an R33 GTR it resolves to nothing. But it exists on R32 GTRs as I discovered a week or two ago.
    • Where is the electrical conduit? 馃ぃ馃ぃ
    • Big single, and seqy. #sorted
    • The R32 suffers from an instrument binnacle that is uncomfortably close to the design of a VN Commodore's. But beyond that, the layout of the rest of everything, and the materials (ie the vinyl coverings on dash, armrest, etc) are acceptable, and the patterns on the fabrics are not as blergh as those in the R33. And R33 seats are....quite unattractive. I know it's only small details there, but I reckon the R33 got worse than the 32. But the big blergh is the overall shape of the dash on the R33. It's just has that whole Maxima/Pulsar sort of look to it. Nothing special at all. Generic Nissan sedan. Whereas, at least the R32 dash/binnacle was different. Less a wide expanse of boringly curved plastic. More a "cockpit" sort of look, even if nowhere near to the degree that the A90 Supras got. R34 seats look good on their own, until you realise that they are indistinguishable from the shape and fabric on 70 other Japanese cars. And the foam bolsters on them suffer even worse than the earlier cars. Other than that I don't really have an opinion the rest of the R34 interior. I took the bits of the R34 I wanted (brakes and engine) and added them to the best external appearance Skyline in the modern era (the 32). So nyerr!
  • Create New...