Jump to content
SAU Community

Recommended Posts

Does that mean if I'm the secretary for a dentist I can start performing root canals?

My point was that if you look around its possible. I had no idea my case was an exception to the rule, but I'd be willing to bet if it was as easy as it was for me it wasn't a one off, so look around until you find someone at a decent rate who's prepared to offer what you need.

if you're a qualified dentist, sure. As a qualified finance broker, I assume I can comment on such things. In order to service our brokers I need to know all aspects of the industry inside out.

I never said it was impossible, but rather said your deal was the exception to the rule.

Edited by Cowboy1600

I know another Credit U. who'll give a secured loan on a 7 yr old car.

So in addition to Ryan, is this exception #2?

It's still not the rule.

Seven years is still out of the norm, but not unheard of. Eleven years is very, very unusual. Even the PCU website says they'll go to five, so for them to negotiate to eleven is odd.

I'm sure you can find more, too. Are you aware of how many lenders there are out there?

Oh, also, did you check the comp. rate on the Greater Building Society? It's 16.41%pa. That's credit card territory. It's fine to say they'll secure it for older cars, but if that means you're paying worse than unsecured credit card or personal loan rates, then it's all a bit pointless, don't you think?

EDIT: Actually, to correct the above you can get 11.19% on cars up to 10 years old. That's pretty good. 10 years is still odd. And I can get 11.95% through a major at the moment for unsecured personal loan.

Edited by Cowboy1600

5-7 years is standard play. Any longer and the interest rates start to creep up. Also, being that its secured, if you do go with a smaller institution and they go bust (banksia), administrators can legally ask for all remaining within 30-60 days.

Welcome Steph.

Do your folks have a mortgage + you have an income + you're trustworthy?

If so, you can obtain a loan at low interest on your car if your folks take ownership of the car whilst you pay it off, and they consolidate the car with the home loan.

When I was about 8,...

I said to Dad, "Mum says that you might loan me some money for my Matchbox car collection - please?"

Dad:- "I might if you give me security on the loan."

Me:- "What's security Dad?"

Dad:- "It's when I've got you by the short 'n curleys."

Me:- "What's short 'n curleys?"

Dad:- "You'll know in 5 years."

hahahahaha Terry!!!

I couldn't agree more with you. Steph you're pretty much up sh!t creek for options. When I got my first skyline I looked into all the options I had being a uni student and working part time. I also had the same trouble you're having with the secured loan, so the bank told me to either borrow extra on my parents mortgage (they didn't have one though this option went out the window) or get an unsecured loan - the commonwealth bank told me they would be happy to loan me the money at 18.6% p.a........Yep, I know, I told them to go stick it and went and found myself another job to buy my baby :O

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • No worries at all 🫡 I think the most satisfying things to make are the little bits that are just impossible to find or they're no longer manufactured. Generally I always try to replace parts with OEM wherever possible. This little project is also great because it'll never see the light of day, but strengthen these brackets so it's not just relying on the little standard screws in the headlight plastic. As soon as I saw the standard brackets and screws I thought, "well I'm not going to install with just the screws, the plastic tabs will just snap off". It's crazy how expensive everything has become yeah. But I suppose that's supply and demand; granted it's a lot easier to get brand new genuine parts these days which is fantastic 😊, I don't have to get totally reamed at the local Nissan dealer ha ha We sure are lucky we have all these manufacturers making parts these days, a few really great Australian companies too like Platinum Racing Products and Fit Mint Automotive, what a time to be alive ❤️ . I've got my eye on the RB26 head by PRP as mine has a very fine hairline crack, so that'll need to be addressed some time in the future. If you have any requests or odd things to make feel free to let me know and I can have a crack at making replacement parts ✌️
    • Thanks for sharing this, and BTW if your headlights are in good condition they are worth thousands....you might want to consider replacing them with brand new LED ones like this (https://www.nengun.com/78works/full-led-headlights-r32-skyline) and making enough profit to buy a house in Sydney
    • I'm not sure what sort of shops are nearby, but I'd expect any reasonable exhaust shop could put a cat in it that will not restrict the power that engine makes. Otherwise, if you want to remove it, short lengths that replace the cat are readily available online, search for "de-cat pipes" or "test pipes"  
    • Howdy friends, So another weird one today, I was looking into replacing some broken clips holding the front grille for the R32 GTR (part number 01553-03831), and noticed the brackets which are supposed to hold the grille in place were also missing 😑. I do recall seeing this issue many years ago, but didn't fix it at the time. A quick look on eBay and I was able to find the genuine brackets, along with all the screws which suited the headlights (part numbers 26042-08U05,26092-08U05). Happy days!....  Once they arrived however there was an extra nut in the packaging which implied that there should also be a bolt or a stud, and sure enough, after a bit of searching I found this thread from 2013, and @Ants clearly shows a stud should be present. Reading around a bit more, it's possible the headlights on my car are the "povo pack" headlights as mentioned by @funkymonkey in this thread way back in 2008. This could explain why the studs are missing on my set of headlights. Looking at the headlight diagram I wasn't able to see a suitable part number for the stud itself. The headlight did indeed have a recess that looked like it would accept a stud, but interestingly no thread or anything obvious how the stud would be affixed to the headlight, I suspect it may have been glued in, press fit, or melted into the plastic at the factory. Another member may be able to clarify if they happen to have a genuine set of N1 headlamps. The only thing we have to work with within the recess is a keyway which likely is there to prevent the stud from rotating within the recess. In any case, back to 3D printing, I put together a model which acts like a pug with a friction fit inside this recess, making use of the keyway so it doesn't rotate while tightening a bolt. Printing in TPU will allow it to slightly swell making a nice snug fit without cracking the part. I've designed the adaptor it to accept an 20 mm M6 bolt (stainless with a cap head in my case), as opposed to the standard M5 stud and I made use of the standard galvanised split washer that came with the genuine brackets from Nissan. Once the bolt and screws were all in place, giving the bracket a gentle shake gave the classic "shaking the car" feeling, very solid, which gives me confidence this is going to be able to hold on much better than the janky solution which seems to have been here for the past decade or so. Overall I'm really pleased with how this turned out and maybe there are more people out there running these headlights without a centre stud at all! Link to the freely available model on Printables: Click here Regards, Sean  
    • Hey everyone, This is my first post apart of the introduction. I tried searching a bit on the forum but couldn't really get a straight answer. I got the car to my mechanic as I felt it being weak. It seems that it was missing on two cylinders due to the injectors. I had all my injectors clean and the car runs much better. The mechanic also confirmed my suspicions that the cat is clogged and needs to be tackled asap. The cat rattles a bit and the hot exhaust warning frequently lights up when driving after getting the injectors clean. In my introduction I was asked about what modification I might be interested in and mentioned a cat delete. From what I was told, this is not really beneficial on the RB20DE and there are more cons than pros.  Could perhaps anyone give some suggestions on what the best course of action would be since the current cat is toast and needs to be removed/replaced anyway? I can also sometimes smell a strong smell of fuel, but I'm not sure if this is related.
×
×
  • Create New...