Whats The Go With An Rb20 Resistor Pack?

[20SIX]

Hey guys,

I'm trying to find info on the rb20 resistor pack.

I just picked one up.

I know the rb26's have a resistor pack for the low impedance injectors.

As far as I'm aware the rb20's run high impedance.

So why would they need a resistor pack? And also the 26 one has one power in and 6 out. Where as this one is only a two wire plug.

Basically my plan was to wire it in to my ute, 4cyl turbo, running low impedance injectors atm with out resistors. It works no worries, but i know I should have resistors in there.

So any info would be much appreciated thanks

[Tonks]

The resistor pack is so that you can run the GTR injectors with your rb20, in saying that you would still require a tune anyway.

Theres a DIY thread somewhere showing you how to wire the resistors in sepereatly I think instead of the resistor pack? (not 100% sure)

Oh heres the diy for the pack into an rb20 anyway if u wanna look? http://www.skylinesaustralia.com/forums/topic/62674-gtr-injectors-into-rb20det/

Edited November 1, 2012 by 4DR_32

[jiffo]

You're not looking at the air reg. resistor are you?

Maybe a photo?

[20SIX]

I'll post a pic up tomorrow for you guys.

Thanks

[Rekin]

There is no resistor pack for rb20 injectors. Only gtr has resistor pack. A common mod is to install gtr injectors into a rb20 which requires the gtr resistor pack.