Jump to content
SAU Community

Recommended Posts

Hi I have a switch in my centre console and I have no idea what it is, looks factory, although the wires have been cut and I can't find the wires it should connect to, I though it maybe antenna but I have that switch near my clock, help please

post-101491-0-91055500-1351758670_thumb.jpg

Edited by Ant_r33
Link to comment
https://www.sau.com.au/forums/topic/412837-help-unknown-factory-switch/
Share on other sites

I'm gonna take a guess and say it was for a parking pole which would've been on the passengers side of the front bumper.

Helps the driver to see where the corner of the car is.

Never seen one though.

I'm gonna take a guess and say it was for a parking pole which would've been on the passengers side of the front bumper.

Helps the driver to see where the corner of the car is.

Correct - I had one one on my stock bumper before I managed to destroy it on a crash barrier.

Hey guys,

I've got an un-own switch in the centre console of my r32 gtr. It's a 2 way switch; seems like high and low n a common in the middle as it has a pic of a small fan on 1 side and a large fan on the other. So if anyone knows what it controls or if they have even seen it in a 32 gtr. Let us know

When I say centre console, i mean the part that makes its way between the 2 front seats.

The button is in the centre storage compartment.

Has anyone seen this before?

Edited by badben

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Sorry no - The sandtrap adventure ended the day, happened at the end of the last session. At that time I wasn't hearing any weird noises nor were the brakes shuddering anymore. It was only when watching the videos that I remembered I had these sounds early on!
    • Did the noise appear after your sand trap adventure? Could be something got dislodged and is playing rub rub. Even a rock wedged somewhere.
    • Is there a shroud around the tailshaft spline into the back of the box? They can rub and make a horrible noise if they are not on straight/damaged. The heat might have caused it to grow too much in one direction and rub.
    • Strangely I noticed it either disappear later in the day, or not be present. I definitely noticed when I was crawling around that open wheel thingy entering the pits (that part was audible in car). Driving home and commuting around town for example, I didn't hear it. It's plausible that it was a brake disc or something still slightly in contact. The brakes absolutely felt BAD for the first couple of sessions, huge amounts of shudder and grinding as they got up to temp - And then I actually just forgot about it as the day went on/didn't notice it. The videos were from the morning when this was more present than the afternoon/drive home when it wasn't. I've asked around and got a variety of responses including handbrake shoe contacting hub, CV joints, CB tailshaft bearing as above, and clutch input bearing. I didn't test if it disappeared when clutch was in. I haven't noticed it in any of the other videos nor did I notice it when driving to that extent. More or less hoping the microphone at the rear license plate giving some kind of clue of 'something' but it looks like "spin stuff and see if you can notice it" is the way forward here. I could be smart and use the gopro mic and re-mount it to that location to see if the sound is still present at low speed actually. Sounds like a decent test whenver I have the CBF'ness to drive the car again. Given it's almost 40C for the day of the track day and the next 3 days after, the CBF is high. All I've done since getting home is unpack the car, remove the remnants of the lip and undertray and left it there. I was surprised how well the PMU Club Racers actually worked. The brake performance on the track was absolutely fantastic, best I've ever personally used, no fade whatsoever and the bitiness was almost too good, I was scrubbing more speed off than I needed to, but I also ended up infield when I started trying to scrape off ... less speed.... so...
    • Not really, no. Anything you would do is easily reversible.
×
×
  • Create New...