Jump to content
SAU Community

Recommended Posts

Zennon headlights bit of damage still good though $600 for the pair

Door's front rear complete $350 each ono probably willing to split these up i.e window regs, door switches etc

Rear bar $200ono

Front bar with lower lip $320

Carbon bonnet $600ono

Blitz turnflow intercooler kit $650

HKS SSQ blow off valve $100

Blitz Air Filter $150

front guards $100 each

Kakimoto Cat back exhaust $650

Decat pipe $50

Front Cut no hanging panels,lights or Radiator $4,200 appears to be R33 engine will include tailshaft $4,200

or will split up

Manual Conversion with aftermarket clutch still have to check it out $3,000

R33 S1 engine package no turbo $1400

R33 rb25det turbo $350

also rear craddle with mech lsd $1,000 NA rear end

East bear recliner with R34 rail offers

got many other parts

pm reply sms or call me on 0422610771 if theres anything else you need

post-15018-0-97016900-1351762494_thumb.jpg

post-15018-0-84537500-1351762509_thumb.jpg

post-15018-0-78225400-1351762524_thumb.jpg

post-15018-0-71287100-1351762539_thumb.jpg

post-15018-0-01893000-1351762555_thumb.jpg

post-15018-0-26330100-1351762571_thumb.jpg

post-15018-0-84774500-1351762586_thumb.jpg

post-15018-0-61781500-1351762604_thumb.jpg

post-15018-0-73339400-1351762619_thumb.jpg

post-15018-0-32763500-1351762635_thumb.jpg

post-15018-0-92498300-1351762649_thumb.jpg

post-15018-0-06882800-1351762665_thumb.jpg

post-15018-0-24362800-1351762680_thumb.jpg

post-15018-0-79688100-1351762694_thumb.jpg

post-15018-0-41566000-1351763221_thumb.jpg

post-15018-0-83040300-1351763315_thumb.jpg

post-15018-0-82367300-1351763367_thumb.jpg

post-15018-0-62925000-1351763382_thumb.jpg

post-15018-0-73368100-1351763403_thumb.jpg

post-15018-0-86225200-1351763423_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/412846-wrecking-r34-4-door/
Share on other sites

  • 4 weeks later...
  • 1 month later...

· R34 Xennonon head lights $500 pair as some damage to the housings

· R34 4 door tail lights $100 each

· R34 front bar Indicators $40 each

· R34Dash wit hall vents $300

· R34 Carbon bonnet some damage cracks etc $400

· R34 4 door Boot lid with no spoiler or holes $250

· R34 4 complete doors $250 each

· R34 Bare front cut shell $500

· R34 Front guards $120 each

· NA R34 Front bumper with custom lip $150

· R34 Kakimoto cat back exhaust $500

· R34 Non abs rear cradle no diff all factory arms $500

· R34 2 way diff $700

· R33 Series 2 power fc

· R33 Series 2 rb25 complete engine package $1500 loom ecu afm turbo (no gearbox)

· Apexi copper radiator $350

· R34 manual conversion $2800

· Nismo R34 boss kit and steering wheel $250

· Almost new R34 CUSCO coilovers $950

· R34 Cusco front & rear sway bars $595

· R34 Red east bear recyclable on drivers rail $550

· R34 Std passenger $100 and rear seat $100

· Full set of R33 GTR rims tyres are bald $800

pricing updated bump

Which cusco coils are these, and will they fit the R34 coupe?

Do you have:

  • Armrest centre console lid - my hinge is half snapped

  • Need a new rear driver-side speaker mesh cover in the back, the ones that are on the parcel shelf at the back - Haven't checked if this is removable by itself, so if not, may need an entirely new parcel shelf
  • Driver side rain shield - the clear red colour piece of plastic

Also i'm in sydney nsw so will need postage....but give me a quote after we decide what you have/what i want

Thanks

  • 2 weeks later...

R34 mech lsd $700

Carbon bonnet $400

Apexi Rad $350

S2 R33 RB25det engine package loom ecu afm no gearbox $1500

R34 4 Door Manual convo kit with exedy clutch $2300

HKS turbo timer $50

R34 4 door na front bar with lip $150

R33 s2 power fc no hc $700

R34 castor rods good bushes $100 the pair

AGAIN SMS AS NOT ON HERE MUCH

0422610771

post-15018-0-72931800-1359447859_thumb.jpg

post-15018-0-70664000-1359447865_thumb.jpg

post-15018-0-34002000-1359447875_thumb.jpg

post-15018-0-74450800-1359447890_thumb.jpg

post-15018-0-69270300-1359447901_thumb.jpg

post-15018-0-02574300-1359447912_thumb.jpg

post-15018-0-60813700-1359447923_thumb.jpg

post-15018-0-60338600-1359447931_thumb.jpg

post-15018-0-99497000-1359447938_thumb.jpg

post-15018-0-87316200-1359447953_thumb.jpg

Edited by 1400r

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • These are small points I should actually add to my original post. GKtech makes an extended slave line for this conversion. It's what I use, and it works well. You'll also need a CD009 slave cylinder.  S/R Chassis Z33/Z34 Conversion braided clutch line As for transmission sensors, you'll need to both extend the wiring and replace the connectors. I can't recall which is which, but one is your neutral switch and the other the reverse switch. As they are just switches, just test for continuity with your transmission in neutral or reverse to figure out which is which. Connectors:  VQ35 neutral Switch Connector | Wiring Specialties VQ35 Reverse Switch Connector | Wiring Specialties 
    • I’ll try and see it could be the release bearing. As for the 4th gear grind maybe clutch doesn’t disengage properly cause it is slightly like very slightly hard to go into first could be due to the slab cylinder pin being short uni clutch is a twin plate.   Ive attached some assembly photos hopefully you can open the link and see maybe detect what’s wrong https://share.icloud.com/photos/0dc2YvW__Hl6jl-l2_0jejjpg https://share.icloud.com/photos/09e0jkWOK-vP48c1cfY6u3ViA https://share.icloud.com/photos/0b4rDmh5R7pK7fb1VtND73a3g https://share.icloud.com/photos/05eeUi_6dC4DVi80jOUYDgb0g https://share.icloud.com/photos/06335TgY1XxyIJal_wkdQLhzw
    • Yeah for sure that is peddle adjustment 
    • What are your thoughts on this after having it for a while, worth getting?
    • Downshifts are harder on transmissions than upshifts, the input shaft naturally slows down once disconnected from the engine so the synchros aren't doing all the work. There's no "natural" tendency for an input shaft to increase RPM. Something is not right there, I don't have a great answer on what. You can try a dedicated GL4 75W90, I plan to switch to Motorcraft XT-M5-QS which is supposedly a very good 75W90 for NB Miatas which have a weirdly sensitive transmission from the factory. I would chase down why your clutch is making a hissing noise, that's not normal. It might be no big deal but in the absence of anything else to investigate I would look at that.
×
×
  • Create New...