Nissan Navara Str Running Rich.

AngryRB · 2012-11-03T05:27:42+0000

hey, just wondering if anyone has experience with nissan navara's, my brother has bought a 2008 D22 navara with the 2.5diesel turbo engine, only has 40k on it and seems to be noticably pouring out alot of black smoke even on light throttles asked my tuner about it and he says they are known to have faulty AFM's, its out of warranty so any opinions?? i have an r33 airflow i guess thats not compatible to try??

By AngryRB,
November 3, 2012 in General Automotive Discussion

https://www.sau.com.au/forums/topic/412960-nissan-navara-str-running-rich/

Followers 0

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign in

Already have an account? Sign in here.

https://www.sau.com.au/forums/topic/412960-nissan-navara-str-running-rich/

Followers 0

Go to topic listing

Announcements

Similar Content
- 0
  
  Nissan Skyline R34 GT-T 1999
  
  By Bman1296
  Started February 4
- 14
  
  RB25 Starts but wont run
  
  By Harley80
  Started October 23, 2024
- 45
  
  Help please, RB25DET runs better on 1/2 throttle!
  
  By Tonyr33gtst
  Started April 6, 2020
- 22
  
  SAUNSW - Cruise - Evening Old Pac Run - Sat 23rd November
  
  By sammi_d
  Started September 29, 2024
- 27
  
  PRP RB26 cast block + head prototype running
  
  By joshuaho96
  Started November 9, 2024
Latest Posts
- Help Understand GTT Boost Setup
  
  By GTSBoy · Posted 40 minutes ago
  
  Yeah. "New pump" does not have to mean "massive pump".
- Help Understand GTT Boost Setup
  
  By MBS206 · Posted 1 hour ago
  
  Well, can you still get an OEM pump, and by the time you're buying a Nismo/N1 etc, just buy another aftermarket pump. It's better to have the pump able to flow more if its needed, than for your pressure to drop off. At any point in time, you're replacing the oil pump in a rebuild. Aftermarket pumps are likely going to be a better economical choice, and they don't have any negatives, even if they can flow more. Also, when you're saying "replace the pump gears" are you meaning leave a 25+ year old housing in the engine with unknown wear, and just put new gears in? As that sounds silly to me, especially if you do have that minute amount of wear, that means your new pump gears now have a little bit more clearance beside them, which means, whelp, you may not get to build a lot of oil pressure or make a lot of flow.
- Help Understand GTT Boost Setup
  
  By joshuaho96 · Posted 1 hour ago
  
  Right, but if you replace the pump gears + put a spline or sine drive gear on the crank on a Nismo/OEM/N1/etc pump at that point do you really still want more flow/oil pressure? Let's say this is a the aforementioned "keep it simple" build, no more than ~400 kW at the crank.
- Help Understand GTT Boost Setup
  
  By MBS206 · Posted 2 hours ago
  
  Strength. And on the early RB26, full engagement of the pump drive.
- Help Understand GTT Boost Setup
  
  By joshuaho96 · Posted 2 hours ago
  
  I really don't understand the point of aftermarket oil pumps if your particular engine doesn't need more oil pressure. As far as I can make sense of it the problem seems to be cavitation from sucking air, maybe the pump gear design with how it interfaces with the OEM crank, and maybe the backing plate screws wanting to loosen themselves. How does flowing more oil fix these issues?

Sign In

Nissan Navara Str Running Rich.

Recommended Posts

AngryRB

Link to comment

Share on other sites

Create an account or sign in to comment

Create an account

Sign in

Announcements

Similar Content

Latest Posts

Forums

Activity