D-Jetro Question - And No Paulr33 Can't Help

[OMGGTR]

I'm in a position were I've searched for 2 hrs now with no resault,

I need to know which afm wires to the ecu go to which map sensor

Eg does AFM ® which in the Nissan manual is pin 26(sig ground) and 27 (intake air signal) go to map sensor on port 3 or port 4? And which wire goes to which wire

Afm (nil) pin 34 (ground) and 35 (air sig)

® is afm closest to p/s reservoir this is by Nissan manual other afm is unnamed (lower)

I can't find a d-jetro instruction manual at all anywhere

My cars a r33 Gtr s3 I own all rb26 manuals so I got wire diagrams n shit but no apexi info and paulr33s site stopped updating info

Hope someone can help not getting a mech to do it I only trust myself on my car

Thanks guys

[RRob]

Map sensor signal from cyl. 3 goes to pin 27. Cyl. 4 goes to pin 35.

[OMGGTR]

Ok thanks mate, there's one green one blue wire do they have a number or u can wire any of them to any afm sensor wire aslong as the vac line u put to the nipple corresponds to what afm wire you put to that sensor?

[OMGGTR]

Also am I just teeing into the wire or cutting it and replacing the afm wire with the map wire? Sorry about all the questions but their just not answered anywhere

[OMGGTR]

Bump

[mico]

put the blue/red to any aslong as 3 wire goes to 3 cyl etc. i just cut mine and replaced no point splicing. dont cut too close to the plug !!

[OMGGTR]

Hahah no problem did u go from the ecu harness ? Or at the afm plug end?